0 Members and 9 Guests are viewing this topic.
Quote from: RastaFish on December 11, 2003, 03:36:29 PMI am curious if you "unpacked" the tape before you recorded with it? The only time I have had a tape snap on me was one of the few times I had not taken the time at home to FF and RW the tape in advance, and usually I record 60-90 seconds of A-time on the tapes in advance as well.
Quote from: bhadella on December 11, 2003, 02:50:32 PMHow do you use a tape that has the back end of it turn up? What is the process to open to casing and reset it to pull to data from it?Brian
Quote from: Brian Skalinder on December 11, 2003, 02:00:32 PMOne thing I've found to help in preventing jammed tapes is to press all action buttons well after pressing the previous one. I found all my portable DAT decks (D7/D8/D100) have wanted to jam if I[a] try to unload/eject too quickly after stopping play/record/ff/rw try to play/record too quickly after rewinding/fastforwarding[c] try to play/record too quickly after loading[d] try to rw/ff too quickly after play/recordYou get the idea. Take a long pause between pressing action keys and it may help. I know it helped me.
Quote from: Drewloo on December 12, 2003, 05:57:12 AMWhile I totally agree w/ Brian about using lots of patience and care when loading/recording, I was suprised to see Doug O. say that the Sony has logic controls and will only do the operation *you* desire when *it* is ready to do it. I think that's what he basically said, anyway. Maybe Sony needs (or needed) to make the 'logic' controller not quite so quick so it gives a bit more time between commands? That said, I think the few times my D8 ate a tape was due to operator error and cheap shells.