Topic: Is this ORTF? *pics included...

[John Willett]

So how does DIN differ from dina?

It's shown in the picture above. 



DIN is 90° - 20cm
DIN A is 90° - 17cm.

[intpseeker]

http://www.shure.com/ProAudio/Products/Accessories/us_pro_A53M_content

those shockmounts will not "get in the way" like the stock Peluso's.

which...btw, John told me he is still working on active cables for.

+T, Nick, for the info on the actives.  I was going through the threads looking to see if I missed news about them.

[manitouman]

Thanks Nick for the link to those shock mounts. Looks like something I may need to add to my arsenal.

[F.O.Bean]

Thanks Nick for the link to those shock mounts. Looks like something I may need to add to my arsenal.

The Peluso's are 22m in diameter, and the Shure a53m's are made for 20mm mics. the 48x are 21mm and can be shoved into them with force, but I HIGHLY DOUBT that you can force 22mm mics in them. They work perfectly and fit like a glove my MBHO KwonBar tho, which is 20mm.

So I would continue shopping around for lopro shocks The Peluo's seem to be the widest mic for most taper mics. Schoeps are 19mm I believe, if not 19mm, then theyre 20mm. AKG 48x are 21mm, along with MBHO 603a's and I believe the regular 603 as well. Dont forget to read up on the specs because even tho 2mm doesnt sseem like a big difference, it really is.

[Nick's Picks]

I used to stuff my 140's in there, so I'm sure the peluso's would fit.

also, there is the Nady sm5, which is a schoeps a20 knock-off.  same size.  would work well.