Become a Site Supporter and Never see Ads again!

Author Topic: ATTN: CCM4 Users with Kwon Bars  (Read 3130 times)

0 Members and 1 Guest are viewing this topic.

Offline dennisrtyler

  • Trade Count: (21)
  • Needs to get out more...
  • *****
  • Posts: 4831
  • Gender: Male
ATTN: CCM4 Users with Kwon Bars
« on: October 18, 2007, 10:40:14 PM »
will the lemo version work in the kwon bars or do you have to use the hardwired U version? TIA!
« Last Edit: October 20, 2007, 10:32:56 AM by dennisrtyler »
4. im so abrasive i make sandpaper nervous.

Schoeps CMR/mk4 > Naiant PFA > Oade Concert Mod Marantz PMD-661

Offline dennisrtyler

  • Trade Count: (21)
  • Needs to get out more...
  • *****
  • Posts: 4831
  • Gender: Male
Re: CCM4L with Kwon Bars?
« Reply #1 on: October 20, 2007, 10:31:34 AM »
bip
4. im so abrasive i make sandpaper nervous.

Schoeps CMR/mk4 > Naiant PFA > Oade Concert Mod Marantz PMD-661

Offline kgreener

  • Trade Count: (4)
  • Taperssection All-Star
  • ****
  • Posts: 1448
  • Gender: Male
Re: ATTN: CCM4 Users with Kwon Bars
« Reply #2 on: October 20, 2007, 12:32:04 PM »
Dennis, to my knowledge the lemo version CCMx will not work in a Kwon bar, and rather the hardwired version will.  This is one of the main reasons I ordered the hardwired CCM41's last spring, and they fit perfectly in the Kwon.

Hope this helps.


Keith

Offline dennisrtyler

  • Trade Count: (21)
  • Needs to get out more...
  • *****
  • Posts: 4831
  • Gender: Male
Re: ATTN: CCM4 Users with Kwon Bars
« Reply #3 on: October 20, 2007, 12:35:06 PM »
Dennis, to my knowledge the lemo version CCMx will not work in a Kwon bar, and rather the hardwired version will.  This is one of the main reasons I ordered the hardwired CCM41's last spring, and they fit perfectly in the Kwon.

Hope this helps.


Keith
that helps alot Keith. thanks! i was afraid that was the answer, as i would really like to go with the lemo version but will not if they won't fit the kwons. +T
4. im so abrasive i make sandpaper nervous.

Schoeps CMR/mk4 > Naiant PFA > Oade Concert Mod Marantz PMD-661

Offline it-goes-to-eleven

  • Trade Count: (58)
  • Needs to get out more...
  • *****
  • Posts: 6696
Re: ATTN: CCM4 Users with Kwon Bars
« Reply #4 on: October 20, 2007, 01:37:12 PM »
It would be pretty easy to enlarge a bar to fit the lemo version.

Offline dennisrtyler

  • Trade Count: (21)
  • Needs to get out more...
  • *****
  • Posts: 4831
  • Gender: Male
Re: ATTN: CCM4 Users with Kwon Bars
« Reply #5 on: October 20, 2007, 02:17:25 PM »
It would be pretty easy to enlarge a bar to fit the lemo version.

does that mean that you know the lemo won't fit a "stock" kwon?
4. im so abrasive i make sandpaper nervous.

Schoeps CMR/mk4 > Naiant PFA > Oade Concert Mod Marantz PMD-661

Offline it-goes-to-eleven

  • Trade Count: (58)
  • Needs to get out more...
  • *****
  • Posts: 6696
Re: ATTN: CCM4 Users with Kwon Bars
« Reply #6 on: October 20, 2007, 04:19:09 PM »
I make my own bars and have never used a kwon.  I briefly had a pair of borrowed CCM4VL's... I even measured them but just checked my notes and did not record the size.  They are likely either 11/32" or 23/64".

I did have a regular sized bar for V's that I put the lemo's in. It was snug but do-able.  But that might not work with the kwon because the amount of give depends on the design.

To enlarge it, I'd shove the drill bit in the hole and then rotate it until it enlarges. That should preserve the alignment. But again, I've never seen a kwon bar so I don't know if there would be a gotcha.

 

RSS | Mobile
Page created in 0.041 seconds with 31 queries.
© 2002-2024 Taperssection.com
Powered by SMF