Not for sure what the 933s look like but this is what I use for my 943s.

http://www.soundprofessionals.com/cgi-bin/gold/category.cgi?item=SP-GNA-3&type=store&category=120

-Kevin

Quote from: caymanreview on April 19, 2003, 04:37:54 PM
im assuming the 33's and 43's are very similar

what kind of a stand did you use with that t-bar? happen to use the sp stand they have on that same page

it would be 79.00 for thier t-bar and stand, sound like a deal?

Thanks
Dustin

So I have one of the sound pro t bars that I dont use.  It is like they show, basically a flex bar, that goes through a AT 8415 shock mount in the middle (this is where the stand connects).  I got it when I bought a set of 853's for stealthing (i.e. why I dont use the mount since I only use these mics for that purpose).  The only thing that would concern me is that the 853's are a bit bigger than the 933's (I believe), which will cause a problem with how they mount.  Let me see if I can explain, at each end of the flex bar is a metal hole about a half inch in diameter, the way you put in the mics in is you put these heavy windscreens that came with the mount through, this fits snuggly with the bar and then stick the mics into the windscreen.  Now the only issue I believe I can see is where the cable comes out of the 933's.  On the 853's it comes out the back so I "plug it straight in."  If the 933's come out the side, that could be an issue.

If your interested in the mount and it sounds like you can use it, let me dig it up and we can probably work something out for it!

Nick

I believe you order the tbars based on which mic capsule is used.  The difference is the windscreen that is supplied with the bar.  Depending on the size of the capsule the opening on the windscreen is bigger or smaller.

If his bar is for the 853s, it may not be a snug fit, but it may work.  You may also be able to buy replacement windscreens that fit the 933s.

HTH

l check into getting different windscreens

nickgregory

email me and maybe we can work something out on buying that one you have, if you wanna come off of it, or if you can find it

thanks for clearing it up john, i bought it by the way

still looking at stands, i dont need anything huge, im looking at a manfrotto 3373 -7 footer

good call!

Quote from: caymanreview on April 23, 2003, 09:19:26 PM
ok, ive decided to go with something bigger, maybe something i can run at a low height and still have the option to go high, say up to 13" id say

anyone got any reccomendations?

Go Bogen....I am not sure if this place is the cheapest, but you will get some model numbers

http://www.micsupply.com/standproducts.htm

The greatest thing about the bogen is when you are in tight setups like arenas and sheds, you can leave the thing collapsed, and since it has a flat bottom, set it directly on the ground and duct tape it in between the seat bottoms, and run it high from there.  A hell of alot more practical than setting up in an aisle.

Nick