I have a possible issue with the MT2 that I just bought a couple of months back here on TS. I searched the old thread and this one and don't see anything mentioned about the MT2 having this problem. I run akg460 mods/ck63 caps >Wmod UA5>MT2 (SPDIF in) running 16 bit only. My first recording was fine as far as I know, but the 5 recordings since have had the same issue. I hear clearly on the wav file about 4 or 5 times in the first hour of the show about 2-4 consecutive pops/static and even a slight dropout on one occasion. I zoom into the spot and it's not a spike but a big long drop for about 2 or 3 seconds long, after the first hour the rest of the show is fine. It can start at 4 min into the file or a little later but it's always on one channel. The first 3 shows were on the right channel only but then the next taping appeared on the left channel only, so my guess is it's one of the mic caps and after talking to an AKG specialist, I sent the caps off to him for analysis. I haven't tried recording on the ck61 card caps but will soon. Oade Bros was trying to tell me the MT2 is famous for interference when using SPDIF input, but the likely culprit is the caps which are old since I'm the third owner of these mics.
Anyone experience anything like this on their wav files when using the SPDIF input? I thought it might be cell phone interference but I used another pair of cables and same thing occurred and the fact that it has occurred on only one channel each time, it has to be one of those caps unless someone tells me they had a similar issue with their MT2.
Thanks in advance for any help or insight.
Tom