Topic: Looking at this Shotgun microphone (Superlux) what do you guys think

[vegeta_ban]

I already have a pair of superlux cm-h8k mics with omni caps and have had great recordings over the past couple of years with them. However I have always wanted a pair of shotguns, do these look good. Since I am likely going to upgrade to an R44 i would like to try these shotguns vs. my omnis.



Also what would the difference between short and long mean soundwise?

    * Back electret microphone
    * Excellent control on off-axis sound
    * Minimum coloration
    * Smooth and extending on-axis response
    * Natural and crystal speech reinforcement

Applications

    * Film and EFP productions.
    * Theater and SNG/ENG tasks

Type: Back electret Condenser
Polar Pattern: Strong Cardioid

PRA118L POLAR GAI
 
Frequency resopnse: 30~16000Hz



PRA118L FR GAI

Sensitivity: -33dBV/Pa (22.4mV/Pa)
Impedance: 200Ω
Minimum Load Impedance:1000Ω
Equivalent Noise Level: 18dB
Max. SPL:130dB(THD 1% 1000Hz).
Signal-to-NoiseRatio: 76dB
Dynamic Range:112dB
Power Supply: 48V DC Phantom
Current consumption: 3mA
Dimension: MIC Φ21mm(0.83")X540mm(21.26")
Foam Φ45mm(1.77")X450mm(17.7")

Price is  $225 a mic, is that good?  since i like the 'luxes i got now would this be good for me as well. Thanks for any input.

Also i hope my questions make any sense

[ArchivalAudio]

personally I don't like the sound of most shotguns
but I have heard some awesome recording made with them
I would stay away from almost any mice that didn't go up to 20k
30-20k would be one thing but 30-16k
I'd say no
cheap price  may not be a great investment you might want to check out some RODE mics
the NTG2  or NTG1

at Full Compass  if you call a rep you can usually get a better price then posted on the web, my rep Ron V has been there for about 20 years and my rep for over 13 years.
here:
http://www.fullcompass.com/product/254849.html

Specifications

    * Acoustic Principle: Line plus Gradient
    * Directional Pattern: Super-Cardioid
    * Frequency Range: 20Hz-20kHz, selectable HPF @ 80Hz/12dB octave
    * Output Impedance: 50 ohms
    * Maximum SPL: 139 dB
    * Power (Supply voltage): P48 Phantom, 44V to 52V
    * Output Connection: 3 pin XLR, balanced output
    * Weight approx.: 3.37 oz
    * Dimensions: 8 9/16" long

NTG 2
here:
http://www.fullcompass.com/product/266727.html

Specifications:

    * Acoustic Principle: Line plus Gradient
    * Directional Pattern: Super-Cardioid
    * Frequency Range: 20Hz-20kHz, selectable HPF @ 80Hz/12dB octave
    * Output Impedance: 250 ohms phantom power, 350 ohmsbattery power
    * Maximum SPL: 131 dB
    * Power (Supply voltage): 1.5V Alkaline battery or P48Phantom
    * Output Connection: 3 pin XLR, balanced output
    * Weight approx.: 5 oz
    * Dimensions: 10 15/16" long

I think they would be better and possibly cheaper for you
# Designed & manufactured in Australia
# Full 2 year guarantee

not a china mic and you'd be happier

peace
--Ian

[ArchivalAudio]

Official RODE website
specs and such
here:
http://www.rodemic.com/microphone.php?product=NTG-1

http://www.rodemic.com/microphone.php?product=NTG-2

probably cost the same  or less for a better mic

[vegeta_ban]

Cool thanks, I'll look into it.