Become a Site Supporter and Never see Ads again!

Author Topic: NAK 700 circuit questions (PLEASE HELP)  (Read 2321 times)

0 Members and 1 Guest are viewing this topic.

Offline igene

  • Trade Count: (25)
  • Taperssection Member
  • ***
  • Posts: 671
  • Gender: Male
NAK 700 circuit questions (PLEASE HELP)
« on: February 09, 2011, 06:07:41 PM »
I'm repairing the mess someone created in one of my 700's.
(could be a mess right from the original build @ Nak)
I can't tell whether they ran out of components or had really poor building skills.
It's even put together wrong.  They're soldered together correctly though.
The circuit path is the same.

1 is fine and looks clean and correct, the other is WTF.
I need to replace all the components, but Mouser says the transistor is obsolete.
Anyone know what to replace it with ?
  (I'll do both if I have to so they match)
also, I'm not sure of the value of the BROWN resistor. It seems to be missing a band.

the abortion circuit >


 

all shots of the good circuit featuring each component separately >






THANKS !!!
« Last Edit: February 10, 2011, 10:51:25 AM by igene »
Leela : ...what are we going to do ?
the Doctor : Should we try using our Intelligence ?
Leela : Well, if you think it's a good idea.
--------------------------------------------------------------------------
Gallifreyan Guard : But you do have access to the greatest source of knowledge in the Universe.
the Doctor : Well, I do talk to myself sometimes, Yes...

Offline Roger Gustavsson

  • Trade Count: (1)
  • Taperssection Member
  • ***
  • Posts: 423
Re: NAK 700 circuit questions (PLEASE HELP)
« Reply #1 on: February 10, 2011, 12:07:37 PM »

The brown resistor should be a high-ohmic one, 1 GOhm or even more. They are expensive. Not sure if this one will fit, Digi-Key Part Number, MOX300F-1000ME-ND.

I am no good in reading resistor values from the colour bands. 1.2 kOhm is my reading. At least they seems to have the same value. They could stay, they are just mounted differently. The one flat with the PCB takes up less of the space.

The ceramic capacitor could stay.

The JFET is a Toshiba 2SK118-O (not zero!) is what is in there and it is doing fine but it is hard to find.
http://www.cen-fr.net/find.php?ref=2SK118O
www.n-tronics.com/english/stock/New-rfq-Stock02.xls
www.hwh-electronic.com/stocklist.xls

Roger


Offline igene

  • Trade Count: (25)
  • Taperssection Member
  • ***
  • Posts: 671
  • Gender: Male
Re: NAK 700 circuit questions (PLEASE HELP)
« Reply #2 on: February 10, 2011, 01:08:11 PM »
I was talking about fixing this circuit >
http://i188.photobucket.com/albums/z48/igene_01/100_3826.jpg

The other one is fine.
I want to make the messed up one look like the good one.
They both work, it's just the one is a MESS.

I'll look into the links you gave me.

Thanks.

(I spent a lot of time on a bench building circuits, and can't stand looking at that disaster when I know I can fix it)
Leela : ...what are we going to do ?
the Doctor : Should we try using our Intelligence ?
Leela : Well, if you think it's a good idea.
--------------------------------------------------------------------------
Gallifreyan Guard : But you do have access to the greatest source of knowledge in the Universe.
the Doctor : Well, I do talk to myself sometimes, Yes...

Offline Roger Gustavsson

  • Trade Count: (1)
  • Taperssection Member
  • ***
  • Posts: 423
Re: NAK 700 circuit questions (PLEASE HELP)
« Reply #3 on: February 10, 2011, 01:29:12 PM »
Just remember these highimpedance circuitries are very sensitive! A fingerprint in the wrong spot could upset the whole thing.


Roger

Offline igene

  • Trade Count: (25)
  • Taperssection Member
  • ***
  • Posts: 671
  • Gender: Male
Re: NAK 700 circuit questions (PLEASE HELP)
« Reply #4 on: February 10, 2011, 02:06:07 PM »
are you saying I shouldn't mess w/ it ?
Leela : ...what are we going to do ?
the Doctor : Should we try using our Intelligence ?
Leela : Well, if you think it's a good idea.
--------------------------------------------------------------------------
Gallifreyan Guard : But you do have access to the greatest source of knowledge in the Universe.
the Doctor : Well, I do talk to myself sometimes, Yes...

Offline Chuck

  • Trade Count: (42)
  • Needs to get out more...
  • *****
  • Posts: 10753
  • Gender: Male
  • time between the notes...
    • My recordings on the LMA
Re: NAK 700 circuit questions (PLEASE HELP)
« Reply #5 on: February 10, 2011, 02:19:56 PM »
Just be careful and clean. You can swab the circuit board with some de-natured alcohol to remove flux and grease after you are done working on it.
Reality is merely an illusion, albeit a very persistent one.

Microphones: Microtech Gefell M300, AKG C 480 B comb-ULS/ CK 61/ CK 63, Sennheiser MKE 2 elements, CAD GXL1200 (cardioid and mod-cardioid capsule & electronics mod), Audix M1290-o, Micro capsule active cables w/ Naiant PFA's, Naiant MSH-1O, Naiant AKG Active cables, Church CA-11 (cardioid), (1) Nady SCM-1000 (mod)
Pre-amps: Naiant littlebox, Naiant littlekit v2.0, BM2p+ Edirol UA-5, Church STC-9000
Recorders: Sound Devices MixPre-6, Tascam DR-680, iRiver iHP-120 (Rockboxed & RTC mod)

Recordings on the LMA: http://www.archive.org/bookmarks/ChuckM
Recording website & blog: http://www.timebetweenthenotes.com

Offline igene

  • Trade Count: (25)
  • Taperssection Member
  • ***
  • Posts: 671
  • Gender: Male
Re: NAK 700 circuit questions (PLEASE HELP)
« Reply #6 on: February 10, 2011, 02:27:07 PM »
I didn't think it was THAT sensitive.

I'm all apart and ready to start... >



I always clean up after. I leave the jobs neat and clean.
I'm concerned now with what you mean by 'very sensitive'.
Leela : ...what are we going to do ?
the Doctor : Should we try using our Intelligence ?
Leela : Well, if you think it's a good idea.
--------------------------------------------------------------------------
Gallifreyan Guard : But you do have access to the greatest source of knowledge in the Universe.
the Doctor : Well, I do talk to myself sometimes, Yes...

 

RSS | Mobile
Page created in 0.045 seconds with 49 queries.
© 2002-2020 Taperssection.com
Powered by SMF