Become a Site Supporter and Never see Ads again!
« previous next »
Pages: [1]   Go Down

Author Topic: left channel failure. What may have caused this?  (Read 3425 times)

0 Members and 1 Guest are viewing this topic.

Offline nicegrin

  • Trade Count: (5)
  • Taperssection Regular
  • **
  • Posts: 192
left channel failure. What may have caused this?
« on: September 13, 2011, 12:36:47 PM »
Hi!

Had one of my recordings failing recently making the bottom half of the left channel looking "damped"  (see picture).
What may have caused this?

Lineage: 2xNevaton MCE400  -> XLRs to 5 pin adapter -> tinybox -> recorder.

and also is there any way to restore/fix the left channel?

Thanks!
N

« Last Edit: September 13, 2011, 12:41:06 PM by nicegrin »
Logged
Toy Box:

MICS:

Omnis:  6xNevaton MCE400s, Countryman b3s (modded), MM HLSOs (4.7K mod), Aevox in ear MK2s, CA-11s
Cards:   Schoeps MK4s with Schoeps CMRS, Milab VM-44 Links, SP CMC-8,  AT853, Sennheiser MKE 104, MM HLSC-1s, ECM-717
Hypers: AKG CK93s (modded), SP CMC-8, AT853, Audix 1280s (Church actives).


INBETWEEN: Naiant Tinybox (CMR mod), Naiant Tinybox (p48 mod), Naiant PFA, CA-9100, CA Ugly, Denecke PS-2 mini, MM-MBM, MM-CBM, SP SPSB-8, custom nuetrik XLR to TRS cables, 5 pin to 5 pin extension cable. 

DECKS: A10, M10, R05, Tascam DR-05, R09-HR , MT2, Sharp MS-H702, MZ-R 70.

Offline nicegrin

  • Trade Count: (5)
  • Taperssection Regular
  • **
  • Posts: 192
Re: left channel failure. What may have caused this?
« Reply #1 on: September 13, 2011, 01:46:47 PM »
Here are some more pics of the recording...

Logged
Toy Box:

MICS:

Omnis:  6xNevaton MCE400s, Countryman b3s (modded), MM HLSOs (4.7K mod), Aevox in ear MK2s, CA-11s
Cards:   Schoeps MK4s with Schoeps CMRS, Milab VM-44 Links, SP CMC-8,  AT853, Sennheiser MKE 104, MM HLSC-1s, ECM-717
Hypers: AKG CK93s (modded), SP CMC-8, AT853, Audix 1280s (Church actives).


INBETWEEN: Naiant Tinybox (CMR mod), Naiant Tinybox (p48 mod), Naiant PFA, CA-9100, CA Ugly, Denecke PS-2 mini, MM-MBM, MM-CBM, SP SPSB-8, custom nuetrik XLR to TRS cables, 5 pin to 5 pin extension cable. 

DECKS: A10, M10, R05, Tascam DR-05, R09-HR , MT2, Sharp MS-H702, MZ-R 70.

Offline nicegrin

  • Trade Count: (5)
  • Taperssection Regular
  • **
  • Posts: 192
Re: left channel failure. What may have caused this?
« Reply #2 on: September 13, 2011, 02:05:31 PM »
I have recorded succesfully with that exact chain of gear before so this is the only time I´ve encountered this problem! :(


Logged
Toy Box:

MICS:

Omnis:  6xNevaton MCE400s, Countryman b3s (modded), MM HLSOs (4.7K mod), Aevox in ear MK2s, CA-11s
Cards:   Schoeps MK4s with Schoeps CMRS, Milab VM-44 Links, SP CMC-8,  AT853, Sennheiser MKE 104, MM HLSC-1s, ECM-717
Hypers: AKG CK93s (modded), SP CMC-8, AT853, Audix 1280s (Church actives).


INBETWEEN: Naiant Tinybox (CMR mod), Naiant Tinybox (p48 mod), Naiant PFA, CA-9100, CA Ugly, Denecke PS-2 mini, MM-MBM, MM-CBM, SP SPSB-8, custom nuetrik XLR to TRS cables, 5 pin to 5 pin extension cable. 

DECKS: A10, M10, R05, Tascam DR-05, R09-HR , MT2, Sharp MS-H702, MZ-R 70.

Offline nicegrin

  • Trade Count: (5)
  • Taperssection Regular
  • **
  • Posts: 192
Re: left channel failure. What may have caused this?
« Reply #3 on: September 13, 2011, 02:19:33 PM »
I thought so too... :(

Maybe a stupid question but would it be possible to copy/paste the bottom half of the right channel to the bottom half ot the left? 
Or would that sound very wierd?

What in general causes assymetrical clipping like this?


Logged
Toy Box:

MICS:

Omnis:  6xNevaton MCE400s, Countryman b3s (modded), MM HLSOs (4.7K mod), Aevox in ear MK2s, CA-11s
Cards:   Schoeps MK4s with Schoeps CMRS, Milab VM-44 Links, SP CMC-8,  AT853, Sennheiser MKE 104, MM HLSC-1s, ECM-717
Hypers: AKG CK93s (modded), SP CMC-8, AT853, Audix 1280s (Church actives).


INBETWEEN: Naiant Tinybox (CMR mod), Naiant Tinybox (p48 mod), Naiant PFA, CA-9100, CA Ugly, Denecke PS-2 mini, MM-MBM, MM-CBM, SP SPSB-8, custom nuetrik XLR to TRS cables, 5 pin to 5 pin extension cable. 

DECKS: A10, M10, R05, Tascam DR-05, R09-HR , MT2, Sharp MS-H702, MZ-R 70.

Offline page

  • Trade Count: (25)
  • Needs to get out more...
  • *****
  • Posts: 8388
  • Gender: Male
  • #TeamRetired
Re: left channel failure. What may have caused this?
« Reply #4 on: September 13, 2011, 03:25:52 PM »
Quote from: nicegrin on September 13, 2011, 02:19:33 PM
I thought so too... :(

Maybe a stupid question but would it be possible to copy/paste the bottom half of the right channel to the bottom half ot the left? 
Or would that sound very wierd?

What in general causes assymetrical clipping like this?

doesn't work that way.

I'm gathering it sounds like ass. One thing you might try is using a clip restoration tool on it. Sometimes they can diduce enough information with whats there to figure out what the bottom section might sound like, but I wouldn't hold out hope.
Logged
"This is a common practice we have on the bus; debating facts that we could easily find through printed material. It's like, how far is it today? I think it's four hours, and someone else comes in at 11 hours, and well, then we'll... just... talk about it..." - Jeb Puryear

"Nostalgia ain't what it used to be." - Jim Williams
Pages: [1]   Go Up
« previous next »
 

RSS | Mobile
Page created in 0.035 seconds with 28 queries.
© 2002-2025 Taperssection.com
Powered by SMF