Become a Site Supporter and Never see Ads again!

Author Topic: Powering microphones for video  (Read 778 times)

0 Members and 1 Guest are viewing this topic.

Offline concertphotodude

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 10
Powering microphones for video
« on: November 20, 2019, 03:15:16 PM »
Question: Does one have to use a battery box to power microphones when videoing a concert? I am going to be using CA14s and / or AT853s and wondered if it is necessary to use supplemental power.
Thanks is advance!

Offline concertphotodude

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 10
Re: Powering microphones for video
« Reply #1 on: November 20, 2019, 03:16:29 PM »
I should also state I will be using a Canon Rebel 3ti.
Thanks

Offline guitard

  • Trade Count: (2)
  • Needs to get out more...
  • *****
  • Posts: 3099
Re: Powering microphones for video
« Reply #2 on: November 20, 2019, 07:01:20 PM »
I am going to be using AT853s

I've filmed shows with my Sony AX-100 with AT853s plugged into the mic out (no pre-amp) and they worked great.
Mics: CA-11 (omnis and cards), AT853 cards, DPA 4060 omnis
Pre-amps: CA-UGLY II & CA-9100
Decks: Edirol R-07 & Edirol R-09HR

Video: Sony FDR AX100 (4K), Pany ZS100 (4K) & Sony DSC HX50V (HD)
Photo: Canon EOS 60D

A/V software: Sony Vegas Pro 13.0 (build 453) 64 bit / DVD Architect Pro 6.0 (build 237)

Offline seethreepo

  • Trade Count: (9)
  • Taperssection Member
  • ***
  • Posts: 989
  • Gender: Male
  • Rub it and see
Re: Powering microphones for video
« Reply #3 on: November 20, 2019, 10:22:25 PM »
bear in mind supplying correct power requirements allow mics to function to their stated specs , supply less and you risk more undesired effects such as distortion / brickwalling etc.
Mics: Sound Professionals - SP-CMC-8 , Studio Projects SPC4, Beyerdynamic ck930 , Marcsounds binaurals
Pre amps: Beyerdynamic MV-1 ,  Naiant IPA
Recorders:  Edirol R-44, Edirol R-09HR, Roland  R-05, Tascam  Dr-2d

Offline shpy

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 48
    • MetalAlive
Re: Powering microphones for video
« Reply #4 on: March 02, 2020, 08:24:44 AM »
definitely use battery box. Also would be great to use attenuator cable too
SP-CMC-2-XLR -> Shure A15AS -> Olympus LS-100

Offline jerryfreak

  • Trade Count: (29)
  • Needs to get out more...
  • *****
  • Posts: 3940
  • the data guy
Re: Powering microphones for video
« Reply #5 on: March 02, 2020, 08:36:04 AM »
usually the only time someone *wouldnt* be using a battery box is when the music is not very loud (acoustic show) and they were concerned about extra gear to be on the downlow.

if youre running a camera out in the open it seems like a small battery box is no big deal. sound professioanls make several good designs
team schoeps, dpa, benchmark, and zoom mostly... subject to change without warning

Offline willndmb

  • Trade Count: (17)
  • Needs to get out more...
  • *****
  • Posts: 6768
  • Gender: Male
Re: Powering microphones for video
« Reply #6 on: March 23, 2020, 07:42:45 PM »
definitely use battery box. Also would be great to use attenuator cable too
if you have a small recorder, I would recommend recording to the recorder and then running line out with the attenuators to the camera.
That way if you overload the camera and/or if something happens with the camera audio you have a back up that can be dubbed
You may find the recorder audio sounds better too and dub just for that reason
Mics - AKG ck61/ck63 (c480b & Naiant actives), SP-BMC-2
XLR Cables - Silver Path w/Darktrain stubbies
Interconnect Cables - Dogstar (XLR), Darktrain (RCA > 1/8) (1/8 > 1/8), and Kind Kables (1/8f > 1/4)
Preamps - Naiant Littlebox & Tinybox
Recorders - PCM-M10 & DR-60D

 

RSS | Mobile
Page created in 0.047 seconds with 49 queries.
© 2002-2020 Taperssection.com
Powered by SMF