Become a Site Supporter and Never see Ads again!

Author Topic: Cassette transfers.  (Read 2513 times)

0 Members and 1 Guest are viewing this topic.

Offline ts

  • Trade Count: (65)
  • Needs to get out more...
  • *****
  • Posts: 3215
  • Gender: Male
Cassette transfers.
« on: April 24, 2019, 05:55:50 PM »
Got another load of GD cassettes coming in this summer. Been experimenting with a few already and undecided on best transfer method that is available to me. Cassette deck is the only constant. Nakamichi CR5A.

This is what I have available:

1. CR5A >V3(digital out)>722
2. CR5A> V3(analog out)>722
- I’ve used both of these quite a bit over the years and have been pleased with the results.
3. CR5A>722
4. CR5A>V2>722
5. CR5A>Mix Pre 6
6. CR5A>ACM V3(digital out)>722

I’ve pretty much tried them all except the V2>722 and ACM Mod V3.

Thanks for the input.
« Last Edit: April 24, 2019, 06:19:08 PM by ts »
Beyerdynamic CK930>Sound Devices MixPre 6

Online heathen

  • Trade Count: (21)
  • Needs to get out more...
  • *****
  • Posts: 2492
Re: Cassette transfers.
« Reply #1 on: April 24, 2019, 05:58:37 PM »
Why use the V2 or V3 at all?  Do you hear a difference between its AD converter and that in the 722?
Recordings on LMA: https://archive.org/search.php?query=taper%3A%22Lucas+Lorenz%22
Mics: Core Sound TetraMic | AT4031 | AT AE5100 | AT853 (C/SC) | Line Audio CM3 | Sennheiser e614 | Sennheiser MKE2 | DPA 4061 | CA-14 omni Pre: CA9200 Decks: Zoom F8 | Roland R-05

Offline ts

  • Trade Count: (65)
  • Needs to get out more...
  • *****
  • Posts: 3215
  • Gender: Male
Re: Cassette transfers.
« Reply #2 on: April 24, 2019, 06:10:21 PM »
Why use the V2 or V3 at all?  Do you hear a difference between its AD converter and that in the 722?

Good question. The answer is yes, depending. I definitely hear a difference in the V3 AD and would hope to hear a big difference in the ACM V3 compared to the 722 AD. More important question to me is the V2 in front of 722. What purpose would this serve? Different flavor?
Beyerdynamic CK930>Sound Devices MixPre 6

Offline Moke

  • Trade Count: (2)
  • Needs to get out more...
  • *****
  • Posts: 4034
  • caught and released 12 of them, ^
Re: Cassette transfers.
« Reply #3 on: April 24, 2019, 08:54:20 PM »
keep it simple
Sent From My Craftsman Garage Door Opener

Offline raymonda

  • Trade Count: (8)
  • Taperssection All-Star
  • ****
  • Posts: 1536
Re: Cassette transfers.
« Reply #4 on: April 24, 2019, 10:58:06 PM »
I use my V3 ACM Oade for cassette transfers at 24/96 and can not hear a difference from the source whether it is vinyl or casettes.

Offline twatts (pants are so over-rated...)

  • <://PHiSH//><
  • Trade Count: (16)
  • Needs to get out more...
  • *****
  • Posts: 9885
  • Gender: Male
  • Lego made a Mini-Fig of me!
Re: Cassette transfers.
« Reply #5 on: April 25, 2019, 10:21:37 AM »
Why use the V2 or V3 at all?  Do you hear a difference between its AD converter and that in the 722?

Good question. The answer is yes, depending. I definitely hear a difference in the V3 AD and would hope to hear a big difference in the ACM V3 compared to the 722 AD. More important question to me is the V2 in front of 722. What purpose would this serve? Different flavor?

IMO, I would use either the V3 or ACM V3 > digi > 722.  If you like the analog inputs of the 722, you could skip the V3s.

But in the end, I think you should reduce the number of analog steps as much as possible, and go for what sounds best to you.

For 99% of listeners out there (like me), there will be no difference in how it sounds.

I've been doing Nak > ACM Tascam HD-P2, and I've been very happy with the results.

Terry




***Do you have PHISH, VIDA BLUE, JAZZ MANDOLIN PROJECT or any other Phish related DATs/Tapes/MDs that need to be transferred???  I can do them for you!!!***

I will return your DATs/Tapes/MDs.  I'll also provide Master FLAC files via DropBox.  PM me for details.

Sony PCM R500 > SPDIF > Tascam HD-P2
Nakamichi DR-3 > (Oade Advanced Concert Mod) Tascam HD-P2
Sony MDS-JE510 > Hosa ODL-276 > Tascam HD-P2

******

Offline ts

  • Trade Count: (65)
  • Needs to get out more...
  • *****
  • Posts: 3215
  • Gender: Male
Re: Cassette transfers.
« Reply #6 on: April 25, 2019, 11:10:45 AM »
Why use the V2 or V3 at all?  Do you hear a difference between its AD converter and that in the 722?

Good question. The answer is yes, depending. I definitely hear a difference in the V3 AD and would hope to hear a big difference in the ACM V3 compared to the 722 AD. More important question to me is the V2 in front of 722. What purpose would this serve? Different flavor?

IMO, I would use either the V3 or ACM V3 > digi > 722.  If you like the analog inputs of the 722, you could skip the V3s.

But in the end, I think you should reduce the number of analog steps as much as possible, and go for what sounds best to you.

For 99% of listeners out there (like me), there will be no difference in how it sounds.

I've been doing Nak > ACM Tascam HD-P2, and I've been very happy with the results.

Terry

The V3 isn’t ACM’ed yet. I was thinking about it. Any votes on V2>722? Add a little Grace flavor to the process?
Beyerdynamic CK930>Sound Devices MixPre 6

Offline twatts (pants are so over-rated...)

  • <://PHiSH//><
  • Trade Count: (16)
  • Needs to get out more...
  • *****
  • Posts: 9885
  • Gender: Male
  • Lego made a Mini-Fig of me!
Re: Cassette transfers.
« Reply #7 on: April 25, 2019, 01:30:02 PM »
Why use the V2 or V3 at all?  Do you hear a difference between its AD converter and that in the 722?

Good question. The answer is yes, depending. I definitely hear a difference in the V3 AD and would hope to hear a big difference in the ACM V3 compared to the 722 AD. More important question to me is the V2 in front of 722. What purpose would this serve? Different flavor?

IMO, I would use either the V3 or ACM V3 > digi > 722.  If you like the analog inputs of the 722, you could skip the V3s.

But in the end, I think you should reduce the number of analog steps as much as possible, and go for what sounds best to you.

For 99% of listeners out there (like me), there will be no difference in how it sounds.

I've been doing Nak > ACM Tascam HD-P2, and I've been very happy with the results.

Terry

The V3 isn’t ACM’ed yet. I was thinking about it. Any votes on V2>722? Add a little Grace flavor to the process?

My only concern about this is having two preamp (analog) steps...

I think you can get just about the same "flavor" by using the V3 and the digital out...  Right???

Terry

***Do you have PHISH, VIDA BLUE, JAZZ MANDOLIN PROJECT or any other Phish related DATs/Tapes/MDs that need to be transferred???  I can do them for you!!!***

I will return your DATs/Tapes/MDs.  I'll also provide Master FLAC files via DropBox.  PM me for details.

Sony PCM R500 > SPDIF > Tascam HD-P2
Nakamichi DR-3 > (Oade Advanced Concert Mod) Tascam HD-P2
Sony MDS-JE510 > Hosa ODL-276 > Tascam HD-P2

******

Offline ts

  • Trade Count: (65)
  • Needs to get out more...
  • *****
  • Posts: 3215
  • Gender: Male
Re: Cassette transfers.
« Reply #8 on: April 25, 2019, 03:15:16 PM »
Why use the V2 or V3 at all?  Do you hear a difference between its AD converter and that in the 722?

Good question. The answer is yes, depending. I definitely hear a difference in the V3 AD and would hope to hear a big difference in the ACM V3 compared to the 722 AD. More important question to me is the V2 in front of 722. What purpose would this serve? Different flavor?

IMO, I would use either the V3 or ACM V3 > digi > 722.  If you like the analog inputs of the 722, you could skip the V3s.

But in the end, I think you should reduce the number of analog steps as much as possible, and go for what sounds best to you.

For 99% of listeners out there (like me), there will be no difference in how it sounds.

I've been doing Nak > ACM Tascam HD-P2, and I've been very happy with the results.

Terry

The V3 isn’t ACM’ed yet. I was thinking about it. Any votes on V2>722? Add a little Grace flavor to the process?

My only concern about this is having two preamp (analog) steps...

I think you can get just about the same "flavor" by using the V3 and the digital out...  Right???

Terry

True, except when going analog out of V3 or V2 I will be going line in on the 722. Nice having the line in option.
Beyerdynamic CK930>Sound Devices MixPre 6

Offline twatts (pants are so over-rated...)

  • <://PHiSH//><
  • Trade Count: (16)
  • Needs to get out more...
  • *****
  • Posts: 9885
  • Gender: Male
  • Lego made a Mini-Fig of me!
Re: Cassette transfers.
« Reply #9 on: April 25, 2019, 03:35:15 PM »

True, except when going analog out of V3 or V2 I will be going line in on the 722. Nice having the line in option.

Ahh!  I didn't know that the 722 had a line-in...

Take your best tape, transfer it several different ways and then do some testing...  Pick the one you like the best and go with that... 

I think the differences we are talking about are too small to be noticeable to most people...

Terry
***Do you have PHISH, VIDA BLUE, JAZZ MANDOLIN PROJECT or any other Phish related DATs/Tapes/MDs that need to be transferred???  I can do them for you!!!***

I will return your DATs/Tapes/MDs.  I'll also provide Master FLAC files via DropBox.  PM me for details.

Sony PCM R500 > SPDIF > Tascam HD-P2
Nakamichi DR-3 > (Oade Advanced Concert Mod) Tascam HD-P2
Sony MDS-JE510 > Hosa ODL-276 > Tascam HD-P2

******

Offline ts

  • Trade Count: (65)
  • Needs to get out more...
  • *****
  • Posts: 3215
  • Gender: Male
Re: Cassette transfers.
« Reply #10 on: April 25, 2019, 06:16:47 PM »

True, except when going analog out of V3 or V2 I will be going line in on the 722. Nice having the line in option.

Ahh!  I didn't know that the 722 had a line-in...

Take your best tape, transfer it several different ways and then do some testing...  Pick the one you like the best and go with that... 

I think the differences we are talking about are too small to be noticeable to most people...

Terry

Yea, I think all my options are pretty solid. Like I said I don’t have the ACM Mod yet and will probably end up passing on it. My V3 is pretty much sold anyway if I choose to let it go.

Basically I’m trying to put my old rig to use before I end up giving it away. The values on V2’s, 3’s and 7xx’s have pretty much shit the bed around here so if I can use this stuff in a transfer rack, why not. 
Beyerdynamic CK930>Sound Devices MixPre 6

Offline Sevoflurane

  • Site Supporter
  • Trade Count: (2)
  • Taperssection Member
  • *
  • Posts: 316
  • Gender: Male
Re: Cassette transfers.
« Reply #11 on: April 25, 2019, 09:31:57 PM »
Always like to hear what others do for cassette transfers.

I know my way is probably a sin. But I have always done Nak CR3A > M10. Again, not ideal. But quality difference is probably negligible.

That Tascam deck looks sick. May be the next purchase.
Mics: Schoeps MK4s, AT853 (4.7k mod)
Pre: Naiant IPA v1.0
Recorders: M10, A10, TCD-D8
Transfers: Nakamichi CR-3A, Tascam DA-20

Offline twatts (pants are so over-rated...)

  • <://PHiSH//><
  • Trade Count: (16)
  • Needs to get out more...
  • *****
  • Posts: 9885
  • Gender: Male
  • Lego made a Mini-Fig of me!
Re: Cassette transfers.
« Reply #12 on: April 26, 2019, 09:22:03 AM »

True, except when going analog out of V3 or V2 I will be going line in on the 722. Nice having the line in option.

Ahh!  I didn't know that the 722 had a line-in...

Take your best tape, transfer it several different ways and then do some testing...  Pick the one you like the best and go with that... 

I think the differences we are talking about are too small to be noticeable to most people...

Terry

Yea, I think all my options are pretty solid. Like I said I don’t have the ACM Mod yet and will probably end up passing on it. My V3 is pretty much sold anyway if I choose to let it go.

Basically I’m trying to put my old rig to use before I end up giving it away. The values on V2’s, 3’s and 7xx’s have pretty much shit the bed around here so if I can use this stuff in a transfer rack, why not.


LOL!  My HD-P2 hasn't left the house in years...  It just sits on top of the "Transfer Stack"...

Every once in a while, I'll start wanting an ACM V3.  But then I kick myself and say, "that's why you got a ACM HD-P2!"

Terry


ETA:  https://taperssection.com/index.php?topic=189745.msg2294636#msg2294636
« Last Edit: April 26, 2019, 09:25:02 AM by twatts (pants are so over-rated...) »
***Do you have PHISH, VIDA BLUE, JAZZ MANDOLIN PROJECT or any other Phish related DATs/Tapes/MDs that need to be transferred???  I can do them for you!!!***

I will return your DATs/Tapes/MDs.  I'll also provide Master FLAC files via DropBox.  PM me for details.

Sony PCM R500 > SPDIF > Tascam HD-P2
Nakamichi DR-3 > (Oade Advanced Concert Mod) Tascam HD-P2
Sony MDS-JE510 > Hosa ODL-276 > Tascam HD-P2

******

Offline Moke

  • Trade Count: (2)
  • Needs to get out more...
  • *****
  • Posts: 4034
  • caught and released 12 of them, ^
Re: Cassette transfers.
« Reply #13 on: April 26, 2019, 09:52:09 AM »
prsently working on cassette transfers myself.
sometimes you open drawers, and you have completely forgotten about masters.
Marantz SD63 -> Tas DR70D 2444
« Last Edit: April 26, 2019, 09:53:55 AM by Moke »
Sent From My Craftsman Garage Door Opener

Offline 108Ω

  • + pace, amore e felicita +
  • Trade Count: (0)
  • Needs to get out more...
  • *****
  • Posts: 10674
  • Gender: Male
  • Waiting on the next cladogenetic event...
    • Oceana North America
Re: Cassette transfers.
« Reply #14 on: April 28, 2019, 08:57:38 AM »
keep it simple

+T
Archiving means not modifying
Use the most transparent means available, then tweak to your heart's content on gen2
"Peace is for everyone"
        - Norah Jones
 “Success is moving from failure to failure with renewed enthusiasm.”
         - Peter Mayer

Offline ts

  • Trade Count: (65)
  • Needs to get out more...
  • *****
  • Posts: 3215
  • Gender: Male
Re: Cassette transfers.
« Reply #15 on: April 28, 2019, 09:49:00 AM »
prsently working on cassette transfers myself.
sometimes you open drawers, and you have completely forgotten about masters.
Marantz SD63 -> Tas DR70D 2444

Nice Moke! Keeping it simple. Curious though, why is the hood open on the Marantz? Azimuth adjust in there somewhere?
Beyerdynamic CK930>Sound Devices MixPre 6

Offline Moke

  • Trade Count: (2)
  • Needs to get out more...
  • *****
  • Posts: 4034
  • caught and released 12 of them, ^
Re: Cassette transfers.
« Reply #16 on: April 28, 2019, 10:39:33 AM »
That was me being stupid.
I'd originally set the cass. deck up on this cabinet in the music room, without thinking.  The opposite end of that cabinet has the household WiFi hub on it.
Without thinking or realizing, I attempted a transfer, and, I came up with this weird pulsing sound. My mind tried to turn it into a bad capacitor in the deck. So I opened it up, and looked for overt signs of bad caps; leaking spots, split cans, etc.. I found nothing.
I tried a second transfer, and, came up with the same noise again. WTF?
Then I realized my mistake, and, moved the deck over to another outlet, and tried again; no noise.
I took the pic before I put the lid back on.
Sent From My Craftsman Garage Door Opener

Offline ts

  • Trade Count: (65)
  • Needs to get out more...
  • *****
  • Posts: 3215
  • Gender: Male
Re: Cassette transfers.
« Reply #17 on: April 28, 2019, 05:24:53 PM »
So I recently got a batch of tapes from mid 90’s up to 2002. My Nak CR5A folds every one of them. They’re all from the same source deck. Sony D5. My Nak plays anything I throw at it, any year any source, except this batch. What could be the issue? Bad storage? Bad D5? I wanted to try these tapes on the D5 that recorded them but that deck is not working and the owner does not want to repair it. Don’t know what to tell him. Would anyone be interested in trying to transfer these tapes? If it’s the Nak I’ll get it serviced, but I don’t think it is.
Beyerdynamic CK930>Sound Devices MixPre 6

Offline 108Ω

  • + pace, amore e felicita +
  • Trade Count: (0)
  • Needs to get out more...
  • *****
  • Posts: 10674
  • Gender: Male
  • Waiting on the next cladogenetic event...
    • Oceana North America
Re: Cassette transfers.
« Reply #18 on: April 28, 2019, 06:45:03 PM »
^ ugh!
Dry lubricant failure on the hub guide sheets?
Stuck tape guide rollers?


"Peace is for everyone"
        - Norah Jones
 “Success is moving from failure to failure with renewed enthusiasm.”
         - Peter Mayer

Offline ts

  • Trade Count: (65)
  • Needs to get out more...
  • *****
  • Posts: 3215
  • Gender: Male
Re: Cassette transfers.
« Reply #19 on: April 28, 2019, 07:44:40 PM »
Found some good stuff on line for cassette repairs. I’m thinking I should have the belts replaced on the deck to.
« Last Edit: April 28, 2019, 08:05:34 PM by ts »
Beyerdynamic CK930>Sound Devices MixPre 6

Offline twatts (pants are so over-rated...)

  • <://PHiSH//><
  • Trade Count: (16)
  • Needs to get out more...
  • *****
  • Posts: 9885
  • Gender: Male
  • Lego made a Mini-Fig of me!
Re: Cassette transfers.
« Reply #20 on: April 29, 2019, 09:16:55 AM »
So I recently got a batch of tapes from mid 90’s up to 2002. My Nak CR5A folds every one of them. They’re all from the same source deck. Sony D5. My Nak plays anything I throw at it, any year any source, except this batch. What could be the issue? Bad storage? Bad D5? I wanted to try these tapes on the D5 that recorded them but that deck is not working and the owner does not want to repair it. Don’t know what to tell him. Would anyone be interested in trying to transfer these tapes? If it’s the Nak I’ll get it serviced, but I don’t think it is.

I assume you FF and RW each tape before transfer???

I have no idea why it would do that except the cassettes have been stored poorly???

Terry
***Do you have PHISH, VIDA BLUE, JAZZ MANDOLIN PROJECT or any other Phish related DATs/Tapes/MDs that need to be transferred???  I can do them for you!!!***

I will return your DATs/Tapes/MDs.  I'll also provide Master FLAC files via DropBox.  PM me for details.

Sony PCM R500 > SPDIF > Tascam HD-P2
Nakamichi DR-3 > (Oade Advanced Concert Mod) Tascam HD-P2
Sony MDS-JE510 > Hosa ODL-276 > Tascam HD-P2

******

Offline Moke

  • Trade Count: (2)
  • Needs to get out more...
  • *****
  • Posts: 4034
  • caught and released 12 of them, ^
Re: Cassette transfers.
« Reply #21 on: April 29, 2019, 09:28:48 AM »
Found some good stuff on line for cassette repairs. I’m thinking I should have the belts replaced on the deck to.

While I had the lid of my deck off, I did take an alcohol soaked piece of cloth, and I cleaned the flywheel, which was kind of dirty. I also lightly rubed the belt while it was rotating with the same alc. rag, and it came up a bit cleaner as well.
Sent From My Craftsman Garage Door Opener

Offline ts

  • Trade Count: (65)
  • Needs to get out more...
  • *****
  • Posts: 3215
  • Gender: Male
Re: Cassette transfers.
« Reply #22 on: April 29, 2019, 06:49:18 PM »
So I recently got a batch of tapes from mid 90’s up to 2002. My Nak CR5A folds every one of them. They’re all from the same source deck. Sony D5. My Nak plays anything I throw at it, any year any source, except this batch. What could be the issue? Bad storage? Bad D5? I wanted to try these tapes on the D5 that recorded them but that deck is not working and the owner does not want to repair it. Don’t know what to tell him. Would anyone be interested in trying to transfer these tapes? If it’s the Nak I’ll get it serviced, but I don’t think it is.

I assume you FF and RW each tape before transfer???

I have no idea why it would do that except the cassettes have been stored poorly???

Terry

Yes, I always FF and RW and then clean head and lube rollers after every couple shows. I just hope that crinkled tapes can eventually be used for transfer. I really don’t know why 40 year old tapes play and 20 year olds won’t. 👍😜

I sent the deck to Pro Dig for a check up. Last time I had it serviced was 2005. I’m sure I’ll get to the bottom of it.
Beyerdynamic CK930>Sound Devices MixPre 6

Offline Popmarter

  • Trade Count: (2)
  • Taperssection Member
  • ***
  • Posts: 587
  • Gender: Male
Re: Cassette transfers.
« Reply #23 on: June 07, 2019, 04:56:25 PM »
From doing a lot of cassettetransfers from nakamichi machines (dragon / cr7), i think the best thing to do is make sure the unit is in excellent condition. Spins the tapes a few times, on a different machine (to avoid dirt on the Nak-machine).

Use some good and short cables to connect to the analog in from the unit that records it. Pick the unit with the 'best' A/D converter. Like said by other...keep it simple. Everything else can be done in post.

I record in 24bit/48 khz. You can go higher if space is no problem, but I really can't think of any technical reason to do so. Make sure to archive the original transfer files, so you can back in case you have to.

Currently in use:
Recorders: Edirol R44, Sony M10 & Sony D6
Microphones: Milab VM-44 Links (cards), AT853 (cards) & Nakamichi CM300 (all CP-s)
Preamps: JK Laboratories DVC-X-17b, Naiant IPA & Nakamichi MX-100 modded for 9v battery use
https://archive.org/search.php?query=taper%3A%22Popmarter%22

Offline ts

  • Trade Count: (65)
  • Needs to get out more...
  • *****
  • Posts: 3215
  • Gender: Male
Re: Cassette transfers.
« Reply #24 on: June 07, 2019, 05:44:02 PM »
I sent the deck to Paul at Prodigital. Should be getting it back soon.
Beyerdynamic CK930>Sound Devices MixPre 6

Offline Sevoflurane

  • Site Supporter
  • Trade Count: (2)
  • Taperssection Member
  • *
  • Posts: 316
  • Gender: Male
Re: Cassette transfers.
« Reply #25 on: June 07, 2019, 09:12:06 PM »
Pick the unit with the 'best' A/D converter.

What would you consider that to be? Also, I have been looking for an external audio card for my Mac Mini for quite some time now. Any suggestions what may be good out there?
Mics: Schoeps MK4s, AT853 (4.7k mod)
Pre: Naiant IPA v1.0
Recorders: M10, A10, TCD-D8
Transfers: Nakamichi CR-3A, Tascam DA-20

Offline Popmarter

  • Trade Count: (2)
  • Taperssection Member
  • ***
  • Posts: 587
  • Gender: Male
Re: Cassette transfers.
« Reply #26 on: June 08, 2019, 02:59:35 PM »
Pick the unit with the 'best' A/D converter.

What would you consider that to be? Also, I have been looking for an external audio card for my Mac Mini for quite some time now. Any suggestions what may be good out there?

In your case most likely: Nak > 722
Again, I believe the - keep it simple -  approach with the cassettedeck being the main concern.

Then there is the Dolby yes/no debate. I prefer Dolby OFF to preserve highs. Only under excellent conditions Dolby is a benefit to some, but in our case (old tapes / different recordertype) it is not.

Second options is too archive both ways (if the master i recorded with dolby on offcourse), one with dolby on, other off.



Currently in use:
Recorders: Edirol R44, Sony M10 & Sony D6
Microphones: Milab VM-44 Links (cards), AT853 (cards) & Nakamichi CM300 (all CP-s)
Preamps: JK Laboratories DVC-X-17b, Naiant IPA & Nakamichi MX-100 modded for 9v battery use
https://archive.org/search.php?query=taper%3A%22Popmarter%22

Offline twatts (pants are so over-rated...)

  • <://PHiSH//><
  • Trade Count: (16)
  • Needs to get out more...
  • *****
  • Posts: 9885
  • Gender: Male
  • Lego made a Mini-Fig of me!
Re: Cassette transfers.
« Reply #27 on: June 08, 2019, 04:36:58 PM »
Pick the unit with the 'best' A/D converter.

What would you consider that to be? Also, I have been looking for an external audio card for my Mac Mini for quite some time now. Any suggestions what may be good out there?

In your case most likely: Nak > 722
Again, I believe the - keep it simple -  approach with the cassettedeck being the main concern.

Then there is the Dolby yes/no debate. I prefer Dolby OFF to preserve highs. Only under excellent conditions Dolby is a benefit to some, but in our case (old tapes / different recordertype) it is not.

Second options is too archive both ways (if the master i recorded with dolby on offcourse), one with dolby on, other off.

Whenever I get a Dolby Cassette, I do playback with and without, and get two Transfers...  I let the person who sent me the Cassette decide which they want to Seed...

Terry
***Do you have PHISH, VIDA BLUE, JAZZ MANDOLIN PROJECT or any other Phish related DATs/Tapes/MDs that need to be transferred???  I can do them for you!!!***

I will return your DATs/Tapes/MDs.  I'll also provide Master FLAC files via DropBox.  PM me for details.

Sony PCM R500 > SPDIF > Tascam HD-P2
Nakamichi DR-3 > (Oade Advanced Concert Mod) Tascam HD-P2
Sony MDS-JE510 > Hosa ODL-276 > Tascam HD-P2

******

Offline Sevoflurane

  • Site Supporter
  • Trade Count: (2)
  • Taperssection Member
  • *
  • Posts: 316
  • Gender: Male
Re: Cassette transfers.
« Reply #28 on: June 09, 2019, 07:58:00 AM »
You connect the cassette deck via RCA > XLR? Can you do the same for a DAT deck with an optical in? This is in regards to 722.
Mics: Schoeps MK4s, AT853 (4.7k mod)
Pre: Naiant IPA v1.0
Recorders: M10, A10, TCD-D8
Transfers: Nakamichi CR-3A, Tascam DA-20

Offline rigpimp

  • Trade Count: (14)
  • Needs to get out more...
  • *****
  • Posts: 2263
  • Gender: Male
  • Jarts don't kill people!
Re: Cassette transfers.
« Reply #29 on: June 10, 2019, 12:46:22 AM »
I used to run Nakamichi > V3 > R-44, but now just run Nakamichi > Mixpre-6
Mics: Schoeps MK5 G MP, Schoeps CCM 4 Lg MP, Schoeps MK8 MP, nBob cables > PFA, KCY 250/5 > PFA
Pre/A>D/P48: Sonosax SX/M2-LS, E.A.A. PSP-2, Naiant Tinybox, Neumann BS48i-2 (for sale)
Recorders: Sound Devices Mixpre-6, Sony PCM-M10
Playback: McIntosh MC 2105 > McIntosh MX 130 > Von Schweikert VR-4 JR
http://archive.org/bookmarks/kskreider

Offline Sevoflurane

  • Site Supporter
  • Trade Count: (2)
  • Taperssection Member
  • *
  • Posts: 316
  • Gender: Male
Re: Cassette transfers.
« Reply #30 on: June 10, 2019, 04:33:12 PM »
I used to run Nakamichi > V3 > R-44, but now just run Nakamichi > Mixpre-6

I'm trying to explain this without sounding dumb. But that's not going to happen... Any way to run into these recorders so that the waveform is the same as what is recorded on the media? Instead of having to adjust levels? I feel like sometimes I run it a bit hot and it sounds brickwalled, even though it's not looking that way on the WAV file.
Mics: Schoeps MK4s, AT853 (4.7k mod)
Pre: Naiant IPA v1.0
Recorders: M10, A10, TCD-D8
Transfers: Nakamichi CR-3A, Tascam DA-20

Offline rigpimp

  • Trade Count: (14)
  • Needs to get out more...
  • *****
  • Posts: 2263
  • Gender: Male
  • Jarts don't kill people!
Re: Cassette transfers.
« Reply #31 on: June 11, 2019, 03:12:27 AM »
I'm not sure that I understand your question. 

I have done literally thousands of cassette transfers.  Shit there is a box of bluegrass tapes at my feet while I type and stacks on my desk collecting dust while I pound through my school work.  I have one of those silly black and white composition books that I use to take notes.  Side A, Side B and their corresponding Mixpre file #s.  I fill an SD card and dump it, make text files, have my historain buddy do a write up and then it all sits idel.

What part isn't going to happen?  If you are brickwalling a digital recorder you probably have your limiters on.  Set the Mixpre so the peaks tick red and you are good.  You should only adjust levels so it does come out like crap.  Anything else can be done in post.  All of mine are residing in raw FlAC'd 24/96 files waiting for some tracking angel to fall from heaven so that I can share them all on the LMA. 

This is all I have been able to upload so far:  https://archive.org/details/thespps
Mics: Schoeps MK5 G MP, Schoeps CCM 4 Lg MP, Schoeps MK8 MP, nBob cables > PFA, KCY 250/5 > PFA
Pre/A>D/P48: Sonosax SX/M2-LS, E.A.A. PSP-2, Naiant Tinybox, Neumann BS48i-2 (for sale)
Recorders: Sound Devices Mixpre-6, Sony PCM-M10
Playback: McIntosh MC 2105 > McIntosh MX 130 > Von Schweikert VR-4 JR
http://archive.org/bookmarks/kskreider

Offline ts

  • Trade Count: (65)
  • Needs to get out more...
  • *****
  • Posts: 3215
  • Gender: Male
Re: Cassette transfers.
« Reply #32 on: June 18, 2019, 08:19:52 PM »
I notice that in some transfer lineage that the cassette deck is sometimes listed as just Nakamichi (no model #) or some other random cassette deck. Usually three head decks. Since we are obviously concerned with playback only for transfers are the big dogs like the Dragon and CR7A really necessary? Aren’t the strong points of these masterpieces for recording? For transfers playback azimuth is the strongest point. Some decks there is a knob on the face, auto or take the door off.
Beyerdynamic CK930>Sound Devices MixPre 6

Offline jefflester

  • Trade Count: (2)
  • Taperssection Member
  • ***
  • Posts: 977
  • Gender: Male
Re: Cassette transfers.
« Reply #33 on: June 18, 2019, 09:32:12 PM »
For transfers playback azimuth is the strongest point. Some decks there is a knob on the face, auto or take the door off.
How many non-"Big Dog" decks have manual azimuth adjust*, much less auto? Not many. Any?
*meaning knob, not a screw

« Last Edit: June 18, 2019, 09:42:41 PM by jefflester »
DPA4061 HEB/AT943 -> CA-UGLY -> R-09
Samson C02/Superlux S502/iSK Little Gem -> DR-680MKII
AKG CK63 -> AKG C460B -> DR-680MKII
AKG CK63 -> nBob actives -> Baby NBox -> R-09/DR2d

Offline twatts (pants are so over-rated...)

  • <://PHiSH//><
  • Trade Count: (16)
  • Needs to get out more...
  • *****
  • Posts: 9885
  • Gender: Male
  • Lego made a Mini-Fig of me!
Re: Cassette transfers.
« Reply #34 on: June 19, 2019, 08:59:25 AM »
I used to run Nakamichi > V3 > R-44, but now just run Nakamichi > Mixpre-6

I'm trying to explain this without sounding dumb. But that's not going to happen... Any way to run into these recorders so that the waveform is the same as what is recorded on the media? Instead of having to adjust levels? I feel like sometimes I run it a bit hot and it sounds brickwalled, even though it's not looking that way on the WAV file.

Technically, you could make Test Transfers and re-adjust the input levels on your recorder until you get the same levels on your input as your output.  I'm not sure that's possible via the meters on your cassette deck vs the meters on your recorder.  I think it would take a lot of technical effort and gizmos...

Years ago, I figured out a good "working" input level on my recorder and stick with that.  If I find that I'm running hot (or not hot enough), I'll adjust and start the Tape over... 

But yeah, when going analog to digital, there's no way to do a "perfect" transfer...  Its the nature of the analog beast...

Terry
***Do you have PHISH, VIDA BLUE, JAZZ MANDOLIN PROJECT or any other Phish related DATs/Tapes/MDs that need to be transferred???  I can do them for you!!!***

I will return your DATs/Tapes/MDs.  I'll also provide Master FLAC files via DropBox.  PM me for details.

Sony PCM R500 > SPDIF > Tascam HD-P2
Nakamichi DR-3 > (Oade Advanced Concert Mod) Tascam HD-P2
Sony MDS-JE510 > Hosa ODL-276 > Tascam HD-P2

******

 

RSS | Mobile
Page created in 0.264 seconds with 76 queries.
© 2002-2019 Taperssection.com
Powered by SMF