Become a Site Supporter and Never see Ads again!

Author Topic: ISO Church Audio Mic Bar....  (Read 5676 times)

0 Members and 1 Guest are viewing this topic.

Offline Gutbucket

  • record > listen > revise technique
  • Trade Count: (13)
  • Needs to get out more...
  • *****
  • Posts: 13108
  • Gender: Male
Re: ISO Church Audio Mic Bar....
« Reply #15 on: February 19, 2018, 08:45:50 PM »
Same reason paper pulp remains one of the best materials for speaker cones.
musical volition > vibrations > voltages > numeric values > voltages > vibrations> virtual teleportation time-machine experience
Better recording made easy - >>Improved PAS table<< | Made excellent- >>click here to download the Oddball Microphone Technique illustrated PDF booklet<<

Offline nak700s

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 623
  • Gender: Male
Re: ISO Church Audio Mic Bar....
« Reply #16 on: February 23, 2018, 01:28:15 PM »
Same reason paper pulp remains one of the best materials for speaker cones.

Yup, it absorbs all vibrations and essentially isolates the microphones...which is important with these little suckas since they are soldered to alligator clips.  I will often gaff-tape a coaster to a beam and clip the CA-14's to them while running an extension cable down to a deck...they work wonders.
Normal: Nakamichi CM-700's >> SD 744T (or) Sony PCM-M10
Normal: Crown CM-700's >> SD 302 >> SD 744T
Fun times: 3 Crown CM-700's >> SD 302 >> SD744T + 2 Nakamichi CM-700's >> SD744T
Stealth: CA-14c >> CA 9200 >> Edirol R-09HR
Ultra stealth: AudioReality >> AudioReality battery box >> Edirol R-09HR
Simple & Sweet!

Offline kdig

  • Trade Count: (1)
  • Taperssection Newbie
  • *
  • Posts: 33
Re: ISO Church Audio Mic Bar....
« Reply #17 on: December 28, 2018, 05:39:46 PM »
FYI: SRS makes XY mounts for CA-11's and DIN mounts for CA-11/14's now.

They cost a bit more than bar coasters, though.

Link: https://www.shapeways.com/shops/srsrecordingservices?section=Church+Audio&s=0
« Last Edit: December 28, 2018, 05:44:02 PM by kdig »

Offline Papaphunk

  • Trade Count: (4)
  • Taperssection Member
  • ***
  • Posts: 400
Re: ISO Church Audio Mic Bar....
« Reply #18 on: January 08, 2019, 08:59:36 AM »
FYI: SRS makes XY mounts for CA-11's and DIN mounts for CA-11/14's now.

They cost a bit more than bar coasters, though.

Link: https://www.shapeways.com/shops/srsrecordingservices?section=Church+Audio&s=0

Thanks, this will be perfect.
****************************************************
CA-14 Card Mic's - CA-11 Omni's - Rode M5 Mic's - Superlux s502
CA 9200 PreAmps - Studio Projects C4 Hyper/Card/Omni
Busman MOD Tascam DR-70D - TASCAM DR-100MKII 
****************************************************

Recordings on archive: https://archive.org/details/@papaphunk

Offline Hahninator

  • Trade Count: (0)
  • Taperssection All-Star
  • ****
  • Posts: 1243
  • Gender: Male
  • Rockin' the ATL
    • Linkin Park Live
Re: ISO Church Audio Mic Bar....
« Reply #19 on: April 23, 2019, 08:16:02 AM »
I just ordered that bar from Shapeways, thanks for the heads up on that.

What's your recommended mic stand? I think I will go with this Manfrotto unless anyone has any other good recommendations.
https://www.amazon.com/Manfrotto-1004BAC-Master-Stand-Black/dp/B0023RRPE2/

Offline BonoBeats

  • Trade Count: (3)
  • Taperssection Member
  • ***
  • Posts: 674
  • Gender: Male
    • My Band- Funk Pocket
Re: ISO Church Audio Mic Bar....
« Reply #20 on: April 23, 2019, 01:20:38 PM »
15" acrylic bar I bought for a dollar. Tape wraps around the center so it fits more snuggly in the shockmount. Double sided tape on the ends, so the mic clips have a better grip.
« Last Edit: April 23, 2019, 01:22:32 PM by BonoBeats »
Telefunken M60 Masters>MixPre6
Naiant XX>SP-SB10>Roland R05

Offline kdig

  • Trade Count: (1)
  • Taperssection Newbie
  • *
  • Posts: 33
Re: ISO Church Audio Mic Bar....
« Reply #21 on: April 30, 2019, 03:55:22 PM »
I just ordered that bar from Shapeways, thanks for the heads up on that.

What's your recommended mic stand? I think I will go with this Manfrotto unless anyone has any other good recommendations.
https://www.amazon.com/Manfrotto-1004BAC-Master-Stand-Black/dp/B0023RRPE2/

I use a Promaster LS-CT Compact travel light stand with a Matthews 48" baby extension combo as mentioned in this thread: http://taperssection.com/index.php?topic=185096.0

Here's a link to the Promaster stand: https://www.amazon.com/Promaster-LS-CT-Compact-Travel-Light/dp/B00EO4WRNG
And the Matthews extension: https://www.bhphotovideo.com/c/product/33185-REG/Matthews_429499_Telescopic_Baby_Stand_Extension.html

I use a Manfrotto 14-38 Rapid Adapter Stud to 3/8": https://www.bhphotovideo.com/c/product/546490-REG/Manfrotto_014_38_014_38_Rapid_Adapter.html
And a 3/8" to microphone screw adapter with a Shure A53M Shock mount on top. Just run the Shapeways bars through the shock mount and clip in your mics.

Ran this set up all weekend at Festival International de Louisiane, and even in pretty good winds at about 10' the stand didn't budge.
« Last Edit: May 03, 2019, 04:43:01 PM by kdig »

Offline 3-Fan

  • Trade Count: (1)
  • Taperssection Member
  • ***
  • Posts: 418
Re: ISO Church Audio Mic Bar....
« Reply #22 on: April 30, 2019, 05:29:58 PM »
I made mic bars up for my AT853 years ago out of cPVC pipe.  I wrapped a layer of felt inside of the cPVC and the mics are snug and hold tight.  Attached are my drawings I used to make my bars.  I place the bar in a single shock mount.  Painted them black.
AT853 > Church 9100 3 wire w/ mini XLR and switchable 4.7K mod > Edirol R-09HR

 

RSS | Mobile
Page created in 0.163 seconds with 36 queries.
© 2002-2019 Taperssection.com
Powered by SMF