Become a Site Supporter and Never see Ads again!

Author Topic: Shouck mount SNAPPED!!  (Read 4803 times)

0 Members and 1 Guest are viewing this topic.

Offline Nick Graham

  • Amorican
  • Trade Count: (3)
  • Needs to get out more...
  • Posts: 4068
  • Gender: Male
Re: Shouck mount SNAPPED!!
« Reply #15 on: November 23, 2004, 05:49:03 PM »
I had the exact thing happen to me once, only I didn't have a wife to blame - only myself, and superglue did the trick. Kept using it for another couple of months and eventually just forgot. One night I left my stand (with the mounts attached) in my car for a couple of days in the extremely hot July sun...and the mount just fell off again. I finally ordered a new one, and kept the broken mount (re-superglued) as a backup.

If I hadn't let the mount get so hot, it'd probably still be holding together fine.
Right now nothing...in the past: Schoeps CMC6, AKG 480, AKG 460, AKG 414, MBHO 603a, Neumann KM100, ADK TL>Schoeps MK4, Schoeps MK2, Schoeps MK41, AKG ck61, AKG ck62, AKG ck63, Neumann AK40, Neumann AK50, MBHO ka200>Lunatec V2, Lunatec V3, Apogee Mini-Me, Oade M148, Oade M248, Sound Devices MP2, Sonosax SXM2>Sony (mod)SBM1, Apogee AD500>D7, D8, D100, M1, R1, R4, R09, iRiver HP120, Microtrack

Offline The Kilted Taper

  • Trade Count: (0)
  • Needs to get out more...
  • *****
  • Posts: 2344
  • Gender: Male
  • Real men wear kilts.
Re: Shouck mount SNAPPED!!
« Reply #16 on: November 23, 2004, 09:56:42 PM »
It did just need to be rescrewed. Still a little loose, so I may JB weld and screw. Thanks all!
"The guy who's been dissed, dismissed and demoted so often that he should have officially changed his first name to "Backup." "

Offline Gordon

  • Trade Count: (22)
  • Needs to get out more...
  • *****
  • Posts: 11791
  • Gender: Male
    • my list
Re: Shouck mount SNAPPED!!
« Reply #17 on: November 25, 2004, 12:34:28 AM »
duct tape and super glue got me through about three or four shows before I had to get a new one.
Microtech Gefell M20 or M21 > Nbob actives > Naiant PFA > Sound Devices MixPre-6 II @ 32/48

https://archive.org/details/fav-gordonlw

https://archive.org/details/teamdirtysouth

Offline jhirte

  • Trade Count: (0)
  • Needs to get out more...
  • *****
  • Posts: 2274
  • Gender: Male
  • At ease atleast yeah.
Re: Shouck mount SNAPPED!!
« Reply #18 on: November 27, 2004, 11:56:49 AM »
here is an extreme hardcore fix:
remove the stripped screw. See if you have a replacement kicking around the house, make sure its not too long, or it'll hit that little bent metal peice on the shockmount where the screw comes thru.

JBWELD. buy it! Apply it to both surfaces before putting the shockmount back together. screw tight! but dont bust the screw. run a bead of JBWEls around the parts. smooth it out a bit.... carefully.... there ya go!

let it sit overnight. and WABAAAM!! You have a shockmount that wont bust apart anymore. unless you drop it, step on it and then your foot gets run over by a steamroller.


Offline kevin p

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 173
  • Gender: Male
Re: Shouck mount SNAPPED!!
« Reply #19 on: November 27, 2004, 10:54:22 PM »
It did just need to be rescrewed. Still a little loose, so I may JB weld and screw. Thanks all!


Just a little tip that may prove useful. I have to occasionaly tighten my mounts and those plastic washers give me a bitch of a time when I'm trying to re-assemble it. so what I do is lick them lightly and they stick just enough to the joint, so i that can free up my fingers to screw back in the big screw in the swivel part.

Offline spcyrfc

  • Trade Count: (8)
  • Taperssection Member
  • ***
  • Posts: 941
  • Gender: Male
  • Live from River City
    • BordersCrossing.net
Re: Shouck mount SNAPPED!!
« Reply #20 on: November 29, 2004, 10:12:07 AM »
how bout replacement bands?
i bought some used at4810a' on the board and the bands are hair ties, they do not provide enough support IMO for the mics - esp. when running guns.
what other solutions have people found?
does AT replace them?
luke
mkh8040>aerco mp-2>pcmd-50
PFS: AKG 414xls

Record Local

www.borderscrossing.net

Offline jhirte

  • Trade Count: (0)
  • Needs to get out more...
  • *****
  • Posts: 2274
  • Gender: Male
  • At ease atleast yeah.
Re: Shouck mount SNAPPED!!
« Reply #21 on: November 29, 2004, 11:53:00 AM »
call at. they will send replacements.

 

RSS | Mobile
Page created in 0.058 seconds with 30 queries.
© 2002-2024 Taperssection.com
Powered by SMF