0 Members and 1 Guest are viewing this topic.
Frequency 40 - 20KSensitivity 17 mv/paCurrent consumption: 4.4 mahload impedance: 600 ohm or greaterNoise Equiv 13 dbMax SPL 132 db @ .05% THDpattern: supercardioid/lobe600 ohm load or greater. Average condensor is 200 ohms or lower Low sensitivity for a shotgun: 17mv/pa. The TOTL shotguns average around 50 mv/pa.Power guzzler: 4.4 mah. Average mic is 2 mah or lower Noise level is nice and low at 13 db.This mic compare to the AKG C568EB shotgun the 568 is also a 600 ohm stick. Its sensitivity is 11 mv/pa, Frequency 20-20K, 600 ohm, Max SPL 128 @ .05% THD, Noise equiv. 18 db. Pattern: hypercardioid/pressure gradient Below 500 hz - a hyper, above 500 hz - increasing directionalityThis comparison is based on specs alone. How it sounds will probably be found in some of the Vid-head forums on the 'net. They'll be the first to try it out. Important to note: this mic is not a capsule, but a stand alone stick.
Quote from: spyder9 on October 05, 2005, 01:28:02 PMFrequency 40 - 20KSensitivity 17 mv/paCurrent consumption: 4.4 mahload impedance: 600 ohm or greaterNoise Equiv 13 dbMax SPL 132 db @ .05% THDpattern: supercardioid/lobe600 ohm load or greater. Average condensor is 200 ohms or lower Low sensitivity for a shotgun: 17mv/pa. The TOTL shotguns average around 50 mv/pa.Power guzzler: 4.4 mah. Average mic is 2 mah or lower Noise level is nice and low at 13 db.This mic compare to the AKG C568EB shotgun the 568 is also a 600 ohm stick. Its sensitivity is 11 mv/pa, Frequency 20-20K, 600 ohm, Max SPL 128 @ .05% THD, Noise equiv. 18 db. Pattern: hypercardioid/pressure gradient Below 500 hz - a hyper, above 500 hz - increasing directionalityThis comparison is based on specs alone. How it sounds will probably be found in some of the Vid-head forums on the 'net. They'll be the first to try it out. Important to note: this mic is not a capsule, but a stand alone stick.at least they picked a nice gun to copy-cat