Become a Site Supporter and Never see Ads again!

Author Topic: SAX>722 issue  (Read 17295 times)

0 Members and 1 Guest are viewing this topic.

Offline jmerin

  • Trade Count: (3)
  • Taperssection All-Star
  • ****
  • Posts: 1199
  • Gender: Male
Re: SAX>722 issue
« Reply #15 on: January 22, 2007, 11:54:29 AM »
Hopefully it's not the sax.  You probably should try different cables, both mic cables and interconnect cables, to make sure it is not them.

When I sold my akg/jklabs set-up, Tommy who bought it was having a very similar problem.  Turned out to be a problem with the interconnects he was using, and a new pair fixed everything up for him.

See you at moe. in a few days!

thanks todd, see you in a few days.  i tried different interconnects. didn't do anything. 
Mics: Schoeps MK4's | Schoeps MK41's | Schoeps Mk21's
Pre-Amps: Schoeps VMS02ib | Nbox Platinum KCY
Cables: KCY 250/5 Ig (2)
Recorders: Sony M10  | Tascam 70D l Edirol R-44

Offline gewwang

  • Trade Count: (4)
  • Needs to get out more...
  • *****
  • Posts: 6251
Re: SAX>722 issue
« Reply #16 on: January 22, 2007, 12:09:56 PM »
fresh=bought them the day before the shows, bought a Energizer MAX
Alkaline 9V Battery -6 Pack

I've had bunk new batteries from both Energizer and Duracell.  Haven't tried many others.  Could just be because I use(d) them less, but I've not stumbled across any bad out-of-the-box lithium 9v batts.  Might be worth a try.  Might be worthwhile to test them in other high-draw gear if you have any lying around.

I would definitely buy a new batch of energizers or duracell alkalines and try again. The last time I had issues with bad batteries in the sax was when I bought a 6 pack of Energizers from a Home Depot before two shows on back-back days. The first show came out fine but that night and the following day after the show, I left the other 4 batteries in the front seat of the car in 90+ degree June weather. The following night as I was swapping batteries, the new batteries felt warm as I was loading them but I didn't think it would be a problem since the night before went fine. Then 30 minutes into the show, I saw the levels on my recorder jumping around from min to overload and the problem was the batteries since a new pair of batteries worked fine the next morning.

Offline baustin

  • Trade Count: (4)
  • Needs to get out more...
  • *****
  • Posts: 2793
  • Gender: Male
Re: SAX>722 issue
« Reply #17 on: January 22, 2007, 01:01:51 PM »
Here's what was happening over the course of multiple nights. I'm assuming Jon was changing batteries every night. First of all, the 722 was set to Line In. The channels were linked and after noticing an issue, they were turned all the way up ( +6 I believe ). With the Sax set to LOW Gain and cranked, the levels never left the green on the 722. With the Sax set to HIGH Gain and cranked to about +40db, the levels were reaching about 12db on the 722. This is during a concert mind you. To my ears through headphones plugged into the 722, it sounded fine, just low.

Possible issues:
-Lemo Cables
-Sonosax (Purchased Brand New)
-Interconnects (Sax~>722)
-Batteries

Offline tim in jersey

  • Site Supporter
  • Trade Count: (8)
  • Needs to get out more...
  • *
  • Posts: 3843
  • Gender: Male
Re: SAX>722 issue
« Reply #18 on: January 22, 2007, 02:57:42 PM »
Is it possible the line-in controls on the 722 were set to menu items 29 and 30 ( line-in gain controlled by menu sensitivity settings) as opposed to item 28 (controlled by front panel knobs)?

You probably already checked that but a quick idiot-check can never hurt...

Offline jmerin

  • Trade Count: (3)
  • Taperssection All-Star
  • ****
  • Posts: 1199
  • Gender: Male
Re: SAX>722 issue
« Reply #19 on: January 22, 2007, 03:04:18 PM »
Is it possible the line-in controls on the 722 were set to menu items 29 and 30 ( line-in gain controlled by menu sensitivity settings) as opposed to item 28 (controlled by front panel knobs)?

You probably already checked that but a quick idiot-check can never hurt...

nope, didn't change a thing.  when i use a v3 it works fine, as well as another sax
Mics: Schoeps MK4's | Schoeps MK41's | Schoeps Mk21's
Pre-Amps: Schoeps VMS02ib | Nbox Platinum KCY
Cables: KCY 250/5 Ig (2)
Recorders: Sony M10  | Tascam 70D l Edirol R-44

Offline scb

  • Eli Manning should die of gonorrhea and rot in hell. Would you like a cookie, son?
  • Trade Count: (11)
  • Needs to get out more...
  • *****
  • Posts: 8684
  • Gender: Male
Re: SAX>722 issue
« Reply #20 on: January 22, 2007, 03:40:34 PM »
so 1 sonosax works, another doesn't?


Offline jmerin

  • Trade Count: (3)
  • Taperssection All-Star
  • ****
  • Posts: 1199
  • Gender: Male
Re: SAX>722 issue
« Reply #21 on: January 22, 2007, 03:49:57 PM »
so 1 sonosax works, another doesn't?



correct
Mics: Schoeps MK4's | Schoeps MK41's | Schoeps Mk21's
Pre-Amps: Schoeps VMS02ib | Nbox Platinum KCY
Cables: KCY 250/5 Ig (2)
Recorders: Sony M10  | Tascam 70D l Edirol R-44

Offline Brian Skalinder

  • Complaint Dept.
  • Trade Count: (28)
  • Needs to get out more...
  • *****
  • Posts: 18873
  • Gender: Male
Re: SAX>722 issue
« Reply #22 on: January 23, 2007, 02:08:47 AM »
so 1 sonosax works, another doesn't?
correct

If I understand correctly, it's not the same Sax, nor the same 722, in these comparisons, though, i.e. a completely different Sax + 722 worked fine some time in the past, while this particular Sax > 722 combo isn't working.  Or maybe I'm missing that it's the same physical Sax and 722 units in all of the discussion about "before" and "now"?

Is it possible the line-in controls on the 722 were set to menu items 29 and 30 ( line-in gain controlled by menu sensitivity settings) as opposed to item 28 (controlled by front panel knobs)?
You probably already checked that but a quick idiot-check can never hurt...

nope, didn't change a thing.  when i use a v3 it works fine, as well as another sax

Even though you didn't change anything, did you confirm by reviewing the actual config on the 722?  Not changing anything isn't the same as confirming the settings were configured as desired.

Tried the new batts yet?
Milab VM-44 Links > Fostex FR-2LE or
Naiant IPA (tinybox format) > Roland R-05

Offline jmerin

  • Trade Count: (3)
  • Taperssection All-Star
  • ****
  • Posts: 1199
  • Gender: Male
Re: SAX>722 issue
« Reply #23 on: January 23, 2007, 07:42:45 AM »
didn't try the new batteries yet, all the 722 options are the same.  will be using new batteries on thursday, if it fails tyhen i know i have to get a new one
Mics: Schoeps MK4's | Schoeps MK41's | Schoeps Mk21's
Pre-Amps: Schoeps VMS02ib | Nbox Platinum KCY
Cables: KCY 250/5 Ig (2)
Recorders: Sony M10  | Tascam 70D l Edirol R-44

Offline jmerin

  • Trade Count: (3)
  • Taperssection All-Star
  • ****
  • Posts: 1199
  • Gender: Male
Re: SAX>722 issue
« Reply #24 on: January 23, 2007, 08:34:18 AM »
didn't try the new batteries yet, all the 722 options are the same.  will be using new batteries on thursday, if it fails then i know i have to get a new one.  its the same 722.
Mics: Schoeps MK4's | Schoeps MK41's | Schoeps Mk21's
Pre-Amps: Schoeps VMS02ib | Nbox Platinum KCY
Cables: KCY 250/5 Ig (2)
Recorders: Sony M10  | Tascam 70D l Edirol R-44

Offline Craig T

  • Trade Count: (10)
  • Needs to get out more...
  • *****
  • Posts: 4333
    • LMA
Re: SAX>722 issue
« Reply #25 on: January 23, 2007, 10:11:53 AM »
I had level issues with my NBox>722 combo once.  Turned out to be a short in the cable connected to the Collette.  I cranked the gain (line in) on the r09, but couldn't peak above -12.  If its not the batteries, I'd send the sax and lemo's in for a checkup.  I didn't suspect the cables since both channels were equally affected, but it turns out due to the circuit layout of the NBox, both channels saw the short.  I watched Nick fix the connection to the Collette - damn those things are tight.  Mine shorted out because I pulled a bit of the cable right out of the strain relief clip.
Schoeps cmc6/4v / Beyer mc950 / Line Audio CM3, OM1 / ADK A51 / Church Audio CA-14
Naiant Tinybox v2.2 / NBox(P) / Church Audio ST9200 / CA-UGLY
Sony PCM-M10 / Zoom F3 / Zoom F6

Offline Jhurlbs81

  • Trade Count: (20)
  • Needs to get out more...
  • *****
  • Posts: 3076
  • Gender: Male
    • My LMA collection
Re: SAX>722 issue
« Reply #26 on: January 23, 2007, 05:43:50 PM »
+T for your troubles Jon.  At least you have a back-up V3 :o

Good luck with getting your issue straightened out.

Jesse
FREE JERRYFREAK!

Offline jmerin

  • Trade Count: (3)
  • Taperssection All-Star
  • ****
  • Posts: 1199
  • Gender: Male
Re: SAX>722 issue
« Reply #27 on: January 23, 2007, 07:00:59 PM »
UPDATE:

I bought new batteries and it works fine,  now i know stay away from energizer.  i had bought 18 badbatteries for the cruise.  now i know.  thanks again for the help


Mics: Schoeps MK4's | Schoeps MK41's | Schoeps Mk21's
Pre-Amps: Schoeps VMS02ib | Nbox Platinum KCY
Cables: KCY 250/5 Ig (2)
Recorders: Sony M10  | Tascam 70D l Edirol R-44

Offline F.O.Bean

  • Team Schoeps Tapir that
  • Trade Count: (126)
  • Needs to get out more...
  • *****
  • Posts: 40692
  • Gender: Male
  • Taperus Maximus
    • MediaFire Recordings
Re: SAX>722 issue
« Reply #28 on: January 23, 2007, 07:07:06 PM »
UPDATE:

I bought new batteries and it works fine,  now i know stay away from energizer.  i had bought 18 badbatteries for the cruise.  now i know.  thanks again for the help




damn, that sweet Jon! Crazy shit for sure, i would run it on 'high' gain setting fwiw, but i guess on '0' youd be fine too :)

so what did you do on the cruise when you realized you had bunk batteries?
Schoeps MK 4V & MK 41V ->
Schoeps 250|0 KCY's (x2) ->
Naiant +60v|Low Noise PFA's (x2) ->
DarkTrain Right Angle Stubby XLR's (x3) ->
Sound Devices MixPre-6 & MixPre-3

http://www.archive.org/bookmarks/diskobean
http://www.archive.org/bookmarks/Bean420
http://bt.etree.org/mytorrents.php
http://www.mediafire.com/folder/j9eu80jpuaubz/Recordings

Offline jmerin

  • Trade Count: (3)
  • Taperssection All-Star
  • ****
  • Posts: 1199
  • Gender: Male
Re: SAX>722 issue
« Reply #29 on: January 23, 2007, 07:18:14 PM »
UPDATE:

I bought new batteries and it works fine,  now i know stay away from energizer.  i had bought 18 badbatteries for the cruise.  now i know.  thanks again for the help




damn, that sweet Jon! Crazy shit for sure, i would run it on 'high' gain setting fwiw, but i guess on '0' youd be fine too :)

so what did you do on the cruise when you realized you had bunk batteries?

its crazy, i thought my gear was messed up.  but now i know, wich i bought new 9 volts on the cruise, couldn't find any
Mics: Schoeps MK4's | Schoeps MK41's | Schoeps Mk21's
Pre-Amps: Schoeps VMS02ib | Nbox Platinum KCY
Cables: KCY 250/5 Ig (2)
Recorders: Sony M10  | Tascam 70D l Edirol R-44

 

RSS | Mobile
Page created in 0.072 seconds with 44 queries.
© 2002-2024 Taperssection.com
Powered by SMF