Topic: Edirol R-09HR - Part FOUR

[it-goes-to-eleven]

I cleaned it out with isopropyl alcohol

What procedure did you use.  IE; a cotton bud won't fit in the hole.

Just curious for future reference.

Just pour it straight in the hole.   

Sounds like a Tom Waits show.

You could cleanly cut the end off a cotton bud and soak the paper stick in alcohol. 

[Gutbucket]

Be sure to do your best gravely T.Waits imitation when working down in the hole.

I've used the cut off Q-tip paper stick which works.  But usually I just dunk the mini plug in alcohol, wipe it clean, dunk again so it's dripping and use that to clean the jack by pluging it in and out repeatedly, twisting it around, and repeating that a few times until the noise is gone.

[guitard]

...plugging it in and out repeatedly, twisting it around, and repeating that a few times until the noise is gone.

In other words - it's basically the same as a good lay. 

[dactylus]

...plugging it in and out repeatedly, twisting it around, and repeating that a few times until the noise is gone.

In other words - it's basically the same as a good lay.