Taperssection.com
Gear / Technical Help => Battery Boxes, Preamps, Mixers, ADCs, and Processors => Topic started by: Grenadablues on February 20, 2005, 03:43:15 PM
-
I have a JB3 on the way from eBAy. I have used the wm61 caps with success on my Sharp MD722. What about a simple battery box to get a line signal for the JB3?
-
Exactly how are you setting the JB3 to get this to work?
-
if your handy you can make your own batterybox with bassroll off.
-
I have a JB3 on the way from eBAy. I have used the wm61 caps with success on my Sharp MD722. What about a simple battery box to get a line signal for the JB3?
I am in the same position. I have the Nakamichi mics that 1) have low gain to begin with and 2) are noisy as hell when not run through some kind of preamp.
I guess I should finally give in that running mic in into a JB3 is not ever going to work!