Become a Site Supporter and Never see Ads again!
Previous topic - Next topic
Pages: Pages1   Go Down

Author Topic: WM61A's > ? Batt Box >NJB3 ? Opinions?  (Read 7,009 times)

0 Members and 1 Guest are viewing this topic.

Offline Grenadablues

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 6
WM61A's > ? Batt Box >NJB3 ? Opinions?
« on: February 20, 2005, 03:43:15 PM »
I have a JB3 on the way from eBAy.  I have used the wm61 caps with success on my Sharp MD722.  What about a simple battery box to get a line signal for the JB3?
Logged

Offline Grenadablues

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 6
Re: WM61A's > ? Batt Box >NJB3 ? Opinions?
« Reply #1 on: March 07, 2005, 07:24:08 PM »
Exactly how are you setting the JB3 to get this to work? 
Logged

Offline Weazel

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 229
  • sp-cmc-8-> DIY BB -> Iriver IHP120 (rockbox)
Re: WM61A's > ? Batt Box >NJB3 ? Opinions?
« Reply #2 on: March 07, 2005, 10:25:35 PM »
if your handy you can make your own batterybox with bassroll off.

Logged
-[ pop goes the weazel ...]-

Offline Patrick

  • Evil Urges, Baby.
  • Trade Count: (2)
  • Needs to get out more...
  • *****
  • Posts: 5,200
Re: WM61A's > ? Batt Box >NJB3 ? Opinions?
« Reply #3 on: March 08, 2005, 08:49:34 PM »
Quote from: Grenadablues on February 20, 2005, 03:43:15 PM
I have a JB3 on the way from eBAy. I have used the wm61 caps with success on my Sharp MD722. What about a simple battery box to get a line signal for the JB3?

I am in the same position.  I have the Nakamichi mics that 1) have low gain to begin with and 2) are noisy as hell when not run through some kind of preamp. 

I guess I should finally give in that running mic in into a JB3 is not ever going to work!
Logged
Monitor Engineer: Band of Horses, Cage the Elephant, Bruce Hornsby, The Head and the Heart, Josh Ritter

Live Music Archive Bookmarks
Pages: Pages1   Go Up
Previous topic - Next topic
 

RSS | Mobile
Page created in 0.057 seconds with 26 queries.
© 2002-2026 Taperssection.com
Powered by SMF