Become a Site Supporter and Never see Ads again!

Author Topic: New Korg MR-2000S  (Read 8512 times)

0 Members and 1 Guest are viewing this topic.

Offline jerrythek

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 31
New Korg MR-2000S
« on: October 03, 2008, 11:43:19 AM »
I hope this isn't considered spam, I just wanted to let you all know what we're premiering today at AES:

www.korg.com/mr2000S

Enjoy.

Regards,

Jerry
Korg Guy
« Last Edit: October 05, 2008, 10:35:22 AM by jerrythek »

Offline rastasean

  • in paradise
  • Trade Count: (23)
  • Needs to get out more...
  • *****
  • Posts: 3699
  • Gender: Male
Re: New Korg MR-2000S
« Reply #1 on: October 03, 2008, 12:17:28 PM »
Advice is a form of nostalgia, dispensing it is a way of fishing the past from the disposal, wiping it off, painting over the ugly parts and recycling it for more than it’s worth.

Offline muj

  • Trade Count: (0)
  • Taperssection All-Star
  • ****
  • Posts: 1544
  • Gender: Male
  • Certifiable Nevaton Fluffer
Re: New Korg MR-2000S
« Reply #2 on: October 03, 2008, 12:54:09 PM »
I need this, don't tell my wife >:D

wow..it has digi in as well...hurrah!!!

Offline TNJazz

  • Ninja
  • Trade Count: (44)
  • Needs to get out more...
  • *****
  • Posts: 5530
  • Gender: Male
  • "Those who know, know."
    • NINJA DYNAMITE
Re: New Korg MR-2000S
« Reply #3 on: October 03, 2008, 01:07:02 PM »
I need this, don't tell my wife >:D

wow..it has digi in as well...hurrah!!!

I was just drooling over it myself.  It would be perfect for my rack.
Check out my band!  --> http://www.ninjadynamite.com

Offline muj

  • Trade Count: (0)
  • Taperssection All-Star
  • ****
  • Posts: 1544
  • Gender: Male
  • Certifiable Nevaton Fluffer
Re: New Korg MR-2000S
« Reply #4 on: October 03, 2008, 01:50:40 PM »
I need this, don't tell my wife >:D

wow..it has digi in as well...hurrah!!!

I was just drooling over it myself.  It would be perfect for my rack.

yup..1u...about time to get rid of my masterlink

+T

Offline ScotK

  • Trade Count: (13)
  • Taperssection Regular
  • **
  • Posts: 182
Re: New Korg MR-2000S
« Reply #5 on: October 03, 2008, 03:12:08 PM »
Can the MR-2 be far behind?!

s

Offline H₂O

  • Trade Count: (28)
  • Needs to get out more...
  • *****
  • Posts: 5745
  • Gender: Male
Re: New Korg MR-2000S
« Reply #6 on: October 03, 2008, 10:19:07 PM »
Will the MR-2000S support DSD Wordclock sync or only PCM?   Also does  the SPDIF support DSD (would doubt it as I have always seen 2 Coax Jacks for DSD Digital IO)?
Music can at the least least explain you and at the most expand you
LMA Recordings

List

Offline mmedley.

  • is on a salty highway burning up a lucky streak
  • Trade Count: (5)
  • Needs to get out more...
  • *****
  • Posts: 6077
  • Gender: Male
  • CAR RAMROD
Re: New Korg MR-2000S
« Reply #7 on: October 04, 2008, 12:24:24 AM »
Will the MR-2000S support DSD Wordclock sync or only PCM?   Also does  the SPDIF support DSD (would doubt it as I have always seen 2 Coax Jacks for DSD Digital IO)?


SPDIF cannot carry DSD data so, it is either converted before processing or or reduced afterward somehow.
I don't know just where I'm going
But I'm gonna try for the kingdom, if I can

Offline jerrythek

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 31
Re: New Korg MR-2000S
« Reply #8 on: October 04, 2008, 12:07:42 PM »
Will the MR-2000S support DSD Wordclock sync or only PCM?   Also does  the SPDIF support DSD (would doubt it as I have always seen 2 Coax Jacks for DSD Digital IO)?

The wordclock and S/PDIF are for the multi-bit PCM formats only.

DSD digital transfers are a protocal called S-DIF 3.

We are showing a very preliminary syncing of 4 units using the S/PDIF connections for a proprietary communication. So we're running a 8-track system (4 units), we can start, stop, locate and even arm recording using this. It's VERY preliminary and won't be part of the system at time of shipping later this month. But it's a hint of where we plan to go.

Regards,

Jerry

Offline H₂O

  • Trade Count: (28)
  • Needs to get out more...
  • *****
  • Posts: 5745
  • Gender: Male
Re: New Korg MR-2000S
« Reply #9 on: October 04, 2008, 11:54:02 PM »
The wordclock and S/PDIF are for the multi-bit PCM formats only.

DSD digital transfers are a protocal called S-DIF 3.

We are showing a very preliminary syncing of 4 units using the S/PDIF connections for a proprietary communication. So we're running a 8-track system (4 units), we can start, stop, locate and even arm recording using this. It's VERY preliminary and won't be part of the system at time of shipping later this month. But it's a hint of where we plan to go.

Regards,

Jerry

+T Sounds exciting!   I'd love to be able to run Double MS DSD or B-Format DSD in the field someday - or even just standard 4 channel DSD!
Music can at the least least explain you and at the most expand you
LMA Recordings

List

Offline boyacrobat

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 374
  • Gender: Male
Re: New Korg MR-2000S
« Reply #10 on: October 05, 2008, 01:24:29 AM »
put it in my guitar rack
record my sessions / shows / productions.

go korg

g

Offline ironbut

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 87
Re: New Korg MR-2000S
« Reply #11 on: October 05, 2008, 03:23:52 PM »
Yeah, saw it Saturday with 4 units sync'ed. Very cool! Super styling too.

Offline Petrus

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 126
Re: New Korg MR-2000S
« Reply #12 on: October 06, 2008, 03:07:09 AM »
I do not get it, why are you guys so enthused about 1-bit DSD when good old 24/96 PMC gives better sound quality and is easy to edit? SACD is not about better resolution, it is about copy protection. Have you ever looked at DSD (SACD) frequency spactrum, there is nothing but antialiasing noise above 22 KH, 24/96 gives 144 dB dynamic range up to 45 KHz (if only mics and electronics could deliver and anybody hear it...).

Offline VA_TAPER

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 904
  • Gender: Male
  • SPA AKG C33E->Hamptone HVTP2->Tascam DV-RA1000 DSD
Re: New Korg MR-2000S
« Reply #13 on: October 06, 2008, 11:10:51 PM »
I do not get it, why are you guys so enthused about 1-bit DSD when good old 24/96 PMC gives better sound quality and is easy to edit? SACD is not about better resolution, it is about copy protection. Have you ever looked at DSD (SACD) frequency spactrum, there is nothing but antialiasing noise above 22 KH, 24/96 gives 144 dB dynamic range up to 45 KHz (if only mics and electronics could deliver and anybody hear it...).

My ears disagree with your supposition that noise above 22khz present in a DSD recording negatively effects the recording.  All delta-sigma converters start out with a DSD type stream and then decimate.  DSD removes that requirement.  I've been recording DSD since 2004 and haven't looked back.

peace, chris
My recordings and transfers at archive.org: http://www.archive.org/search.php?query=berryman%20AND%20mediatype%3Aetree%20AND%20collection%3Aetree

“Those who cast the votes decide nothing. Those who count the votes decide everything.”  Joseph Stalin

Offline boyacrobat

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 374
  • Gender: Male
Re: New Korg MR-2000S
« Reply #14 on: October 07, 2008, 12:09:04 AM »
petrus start another thread for your dsd tears.
this is about a wonderful new dsd option available
for the people who use dsd and know they love it.

pcm 24/96 is an ex option to use, use it
happy captures to you petrus

g

 

RSS | Mobile
Page created in 0.079 seconds with 38 queries.
© 2002-2024 Taperssection.com
Powered by SMF