Become a Site Supporter and Never see Ads again!

Author Topic: microphone for my Hitachi camcoder, help!  (Read 3853 times)

0 Members and 1 Guest are viewing this topic.

Offline vadimo

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 24
microphone for my Hitachi camcoder, help!
« on: January 07, 2007, 01:31:18 PM »
i really know almost 0 about microphones, i got 'Hitachi DZ-MV730E camcorder' and the build in mic isn't great!

Im from UK and i record heavy music shows so i just want something good, doesn't have to be the best, also price does matter!

here is an example of my master and what does my current mic sounds like!
http://www.youtube.com/watch?v=lgV7GTqKBf0

thank you.

Offline kuuan

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 243
  • Gender: Male
Re: microphone for my Hitachi camcoder, help!
« Reply #1 on: January 07, 2007, 02:37:00 PM »
According to the Hitachi site: http://www.hitachidigitalmedia.com/DMG/viewProduct_1.jsp?productid=470
your camcorder does NOT have any external mic jack.

..if this is true you will need an audio recorder first.
Options in order from cheapest up are Sony HiMD, iRiver iHP120/140/320/340, Zoom H4, Edirol R-09, check the 'recording gear' section.
Everything you do through out the day, every thought and every feeling leaves an impression stored inside you.
These impressions create tendencies, their sum total is your character.
gear: SP-CMC8+AT853 cards+omnis, AT822>DIY preamp>iRiverH120rockboxed

Offline vadimo

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 24
Re: microphone for my Hitachi camcoder, help!
« Reply #2 on: January 07, 2007, 03:02:54 PM »
hi there, heh it does have one and i think you miss-red the info cause it states there "External Microphone Jack" under 'Connection'.  ;)

so if u could help me out with mic, would appreciate it!

 :)

Offline kuuan

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 243
  • Gender: Male
Re: microphone for my Hitachi camcoder, help!
« Reply #3 on: January 07, 2007, 04:09:31 PM »
good! so many cams, specially new ones, even HDV cams don"t have any mic-in, good your's does have one.
I am no big specialist and there are many around who have much more experience with mics than I do, and after all it depends what you want and how much you want to spend.

Anyhow, if it should be a 'single point stereo mic' which  ( 2 mono caps in X/Y config. inside a single body ) which easily can be mounted on the cam and has a mini stereo plug to connect directly with your cam ( unballanced, does not need phantom power ), I'd recommend either the AT822 http://www.audio-technica.com/cms/wired_mics/665bdf92967733dc/
or the Beyerdynamic MCE82

if it was a matched pair the Studio Projects C4 are liked around here ( http://www.studioprojects.com/c4.html )

if they should be very small the SP-CMC4 ( http://www.soundprofessionals.com/cgi-bin/gold/item/SP-CMC-4U ) or other SP, Church Audio's mics asf. are a favourites of many, sometimes cheaply to be had in the yard sale here.
Everything you do through out the day, every thought and every feeling leaves an impression stored inside you.
These impressions create tendencies, their sum total is your character.
gear: SP-CMC8+AT853 cards+omnis, AT822>DIY preamp>iRiverH120rockboxed

Offline vadimo

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 24
Re: microphone for my Hitachi camcoder, help!
« Reply #4 on: January 07, 2007, 04:34:10 PM »
bloody hell those are pricy lol

i was looking for something up to £50 ($100)

thanks for sticking with me

Offline kuuan

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 243
  • Gender: Male
Re: microphone for my Hitachi camcoder, help!
« Reply #5 on: January 07, 2007, 04:51:02 PM »
you are asking for it:

than buy mine, a Panasonic VW-VWS2 incl. selfmade shockmount for 75 Euro + shipping:





excerpt of it's specs:
power source: 1,5 V battery
directional characteristics: unidirectional ( stereo )
nondirectional ( mono )
frequency response: 100Hz to 20.000 Hz
sensitivity: -47 db ( o db = 1V/pa,1 kHz )
output impedance: 600 Ohm
S/N ratio: 67 db or more
cord: 3,5mm stereo mini plug cord length 300 mm
switches: off/mono/stereo
wind cut: on/off

it's an original japanese mic, I had bought it 2 years ago in Osaka, the selfmade shockmount works great, uses the mic's shoe to mount, is very stable, can be used to carry the cam 'overhaed',and of course is in good working condition, hardly any signs of use to be found.



« Last Edit: January 07, 2007, 05:00:06 PM by kuuan »
Everything you do through out the day, every thought and every feeling leaves an impression stored inside you.
These impressions create tendencies, their sum total is your character.
gear: SP-CMC8+AT853 cards+omnis, AT822>DIY preamp>iRiverH120rockboxed

Offline vadimo

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 24
Re: microphone for my Hitachi camcoder, help!
« Reply #6 on: February 12, 2007, 05:49:20 AM »
recieved the mic in perfect condition!

i have tested the mic @ the venue and here is what i wrote to kuuan in email:

Quote
Hi Andreas,
I managed to test it on sunday @ the show, well the outcome was PERFECT for me!

Bye bye these bassy and crunchy bass sounds.
Sound was very good and clear and i see now what you mean about using shockwave pipe!
here is my youtube masters: http://www.youtube.com/profile?user=vadimo

take care and thanks for the great sale.

 

RSS | Mobile
Page created in 0.056 seconds with 36 queries.
© 2002-2024 Taperssection.com
Powered by SMF