Become a Site Supporter and Never see Ads again!

Author Topic: Will the AD2000 work with just a soundboard?  (Read 3725 times)

0 Members and 1 Guest are viewing this topic.

Offline Billy Mumphrey

  • Trade Count: (2)
  • Taperssection All-Star
  • ****
  • Posts: 1495
Will the AD2000 work with just a soundboard?
« on: December 02, 2003, 12:20:44 PM »
We have a Yamaha mixing board. If I go rca out of the board into the rca in of the AD2000, can I stream that into my terratec ewx 2496 optical in and then into Cool Edit Pro?
formerly known as "Chanher"

location, location, location

Offline Tim

  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 32913
  • Gender: Male
Re:Will the AD2000 work with just a soundboard?
« Reply #1 on: December 02, 2003, 12:23:23 PM »
ad2000?

I’ve had a few weird experiences and a few close brushes with total weirdness of one sort or another, but nothing that’s really freaked me out or made me feel too awful about it. - Jerry Garcia

Offline joeshambro

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 967
  • Gender: Male
  • taper turned professional FOH mixer
Re:Will the AD2000 work with just a soundboard?
« Reply #2 on: December 02, 2003, 12:56:27 PM »
http://www.soundprofessionals.com/cgi-bin/gold/category.cgi?category=570&item=SP-AD2000&type=store

Basically the AD2000 is the Sound Professional's low low cost A/D...  sound quality wise, I'm guessing it's at least a moderate improvement over going analog in to a PC sound card..

But to answer your question Chris, that'll work just fine.

Offline Tim

  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 32913
  • Gender: Male
Re:Will the AD2000 work with just a soundboard?
« Reply #3 on: December 02, 2003, 01:07:30 PM »
thanks Joe

and yes that will work just fine!
I’ve had a few weird experiences and a few close brushes with total weirdness of one sort or another, but nothing that’s really freaked me out or made me feel too awful about it. - Jerry Garcia

 

RSS | Mobile
Page created in 0.043 seconds with 27 queries.
© 2002-2025 Taperssection.com
Powered by SMF