Become a Site Supporter and Never see Ads again!

Author Topic: MASTER MY RATM RECORDING PLEASE!!  (Read 5318 times)

0 Members and 1 Guest are viewing this topic.

Offline Md2545

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 39
  • Gender: Male
  • I am not a number I am a free man!!!
MASTER MY RATM RECORDING PLEASE!!
« on: August 04, 2008, 05:58:31 PM »
Ok so I taped Rage against the machine on sat at lollapalooza, and if any of you were there or heard it was insane, they had to stop the shows three times because the crowd was so rowdy. Anyways I taped the show in the middle of the crazyness, the levels are to low, the crowd noisy and there are alot of tweaks to be made before I circulate (that is if we can bring the sound to what I feel is acceptable)  I would like to deal with just one person, must be very skilled with mastering recordings and I would prefer if you live in the chicago land area. Also you must abide by my wishes to not circulate the show if it doesn't turn out to my standards. The show was recorded in 24/48 with Sonic Studios > D50


Thanks,
MD
DSM-6S/M>PA-6>Sony PCM D50 or Sony TCD-D100

DPA 4060 > Core-Sound B.Box > Sony PCM-D50

Offline page

  • Trade Count: (25)
  • Needs to get out more...
  • *****
  • Posts: 8388
  • Gender: Male
  • #TeamRetired
Re: MASTER MY RATM RECORDING PLEASE!!
« Reply #1 on: August 04, 2008, 06:15:20 PM »
Also you must abide by my wishes to not circulate the show if it doesn't turn out to my standards.

I'm not trying to troll, so take that into consideration when I say this; I think that if this is something that bothers you, you'd do well to sit down and practice for a while with a good audio editor. I've known people who did transfers and saved copies for later regardless of the tapers wishes, once it's out of your hands, it's out of your hands. If you send it out, then it might not be tomorrow or next week, but odds on (not a guarantee, but odds on) that it would eventually circulate.

On that note, if you choose to do it yourself, then remember the general rule of thumb that less processing is better then more processing. Good luck, take care.
"This is a common practice we have on the bus; debating facts that we could easily find through printed material. It's like, how far is it today? I think it's four hours, and someone else comes in at 11 hours, and well, then we'll... just... talk about it..." - Jeb Puryear

"Nostalgia ain't what it used to be." - Jim Williams

Offline Brian Skalinder

  • Complaint Dept.
  • Trade Count: (28)
  • Needs to get out more...
  • *****
  • Posts: 18873
  • Gender: Male
Re: MASTER MY RATM RECORDING PLEASE!!
« Reply #2 on: August 04, 2008, 10:16:19 PM »
Can you post an MP3 sample (not a "great sounding" sample, not a "bad sounding" sample, just something average / run of the mill for the recording) so those who might have interest will have some idea with what they'll be working?
Milab VM-44 Links > Fostex FR-2LE or
Naiant IPA (tinybox format) > Roland R-05

Roving Sign

  • Guest
  • Trade Count: (0)
Re: MASTER MY RATM RECORDING PLEASE!!
« Reply #3 on: August 05, 2008, 08:06:29 AM »
You sound like a bit of an eager beaver...

I'd wait and see what other recordings surface - Chances are pretty good there were other tapers (with better gear)

After that - I wouldnt get too excited unless you think you may have something approaching a "definitive" version...

I'd take this as your big chance to download Audacity (freeware editor) - and start learning the few basic tasks/processes that we all use. (I think only a few of us would claim to be "very skilled" in audio editing...)

If for some reason it turned out to be the only recording - then who cares how it sounds...? That alone would make it worthy of circulation.

I'd just track it as it is and hope a half-dozen "remastered" versions appear!

Offline Belexes

  • Trade Count: (10)
  • Needs to get out more...
  • *****
  • Posts: 5223
  • Gender: Male
Re: MASTER MY RATM RECORDING PLEASE!!
« Reply #4 on: August 05, 2008, 01:38:09 PM »
Busman Audio BSC1-K1/K2/K3/K4 > HiHo Silver XLR's > Deck TBD

CA-14 (c,o)/MM-HLSC-1 (4.7k mod)/AT853(4.7k mod)(c,o,h,sc)/CAFS (o)/CA-1 (o) > CA-9100 (V. 4.1)/CA-9200/CA-UBB > Sony PCM-D50/Sony PCM-M10

Offline Md2545

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 39
  • Gender: Male
  • I am not a number I am a free man!!!
Re: MASTER MY RATM RECORDING PLEASE!!
« Reply #5 on: August 05, 2008, 05:18:33 PM »
I will try and master the recording myself.
« Last Edit: August 05, 2008, 05:29:14 PM by Md2545 »
DSM-6S/M>PA-6>Sony PCM D50 or Sony TCD-D100

DPA 4060 > Core-Sound B.Box > Sony PCM-D50

Offline rastasean

  • in paradise
  • Trade Count: (23)
  • Needs to get out more...
  • *****
  • Posts: 3699
  • Gender: Male
Re: MASTER MY RATM RECORDING PLEASE!!
« Reply #6 on: August 05, 2008, 05:40:56 PM »
I would be highly interested in hearing this album if you do decide to make it available for our ears to hear.
Advice is a form of nostalgia, dispensing it is a way of fishing the past from the disposal, wiping it off, painting over the ugly parts and recycling it for more than it’s worth.

Offline Md2545

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 39
  • Gender: Male
  • I am not a number I am a free man!!!
Re: MASTER MY RATM RECORDING PLEASE!!
« Reply #7 on: August 05, 2008, 05:52:12 PM »
Audacity is alot easier than what I was using. I was very excited for Rage and it's a shame that the tape turned out the way it did. It was the complete opposite of my Alpine taping experience. Full of people yelling as well as singing along but louder than the zach, and the sonic "sense" is all over the place, I was right in front of the soundboard on the left side, I appreciate peoples 2 cents. when I got home I was so upset by they way it sounded I wanted nothing to do with the recording (mastering wise), seeking help I came here (maybe a bit to soon). but I'll see what I can do on my own. wish me luck.


MD

I don't know why people are -T me. Before I posted this topic I had +5. I hope people arn't taking this the wrong way. I was just asking for help
« Last Edit: August 05, 2008, 07:28:05 PM by Md2545 »
DSM-6S/M>PA-6>Sony PCM D50 or Sony TCD-D100

DPA 4060 > Core-Sound B.Box > Sony PCM-D50

Offline page

  • Trade Count: (25)
  • Needs to get out more...
  • *****
  • Posts: 8388
  • Gender: Male
  • #TeamRetired
Re: MASTER MY RATM RECORDING PLEASE!!
« Reply #8 on: August 06, 2008, 12:42:14 PM »
I don't know why people are -T me. Before I posted this topic I had +5. I hope people arn't taking this the wrong way. I was just asking for help

I'm guessing it was:

just one person, must be very skilled with mastering recordings and I would prefer if you live in the chicago land area. Also you must abide by my wishes to not circulate the show if it doesn't turn out to my standards.

I've gotten zinged for crap before, it happens, sometimes its even for taking the high road and doing something unpopular, but ultimately the moral/proper thing (the stealth debate here on TS is one topic I can think of that fits that). I think you could have said that if you were paying someone, but doing that and asking for a freebie I think is where you got into trouble. Thats my best guess. ymmv
"This is a common practice we have on the bus; debating facts that we could easily find through printed material. It's like, how far is it today? I think it's four hours, and someone else comes in at 11 hours, and well, then we'll... just... talk about it..." - Jeb Puryear

"Nostalgia ain't what it used to be." - Jim Williams

Offline Əkoostikal

  • Trade Count: (1)
  • Taperssection Member
  • ***
  • Posts: 680
  • Gender: Male
  • One of these days....
Re: MASTER MY RATM RECORDING PLEASE!!
« Reply #9 on: August 08, 2008, 08:26:35 PM »
This show just popped up on etree http://bt.etree.org/details.php?id=517497 (not sure if it allowed on there or not) but anyway I am curious of this was your (MD2545) recording or someone elses.....
BONGWATER via Etree:

"Phil Keeps on growing, never even slowing, never really knowing all of the minds he's really blowing!!!!!"

Offline newplanet7

  • Hasn't heard a muddy 460/480 tape. EVER. Mike Hawk
  • Trade Count: (5)
  • Needs to get out more...
  • *****
  • Posts: 3530
  • Gender: Male
  • The Place To Be...... Akustische u. Kino-Geräte
Re: MASTER MY RATM RECORDING PLEASE!!
« Reply #10 on: August 08, 2008, 10:10:21 PM »
Looks to be someone elses for sure.
No D50 or D100
MILAB VM-44 Classic~> Silver T's~> Busman PMD660
News From Phish: Will tour as opening act for Widespread Panic for Summer
hahaha never happen, PHiSH is waaaaayyyy better the WSP

They both ain't got nothing on MMW... Money spent wisely if you ask me...


FYI, it is a kick ass recording of a bunch of pretend-a-hippies talking.

Offline rhinowing

  • Trade Count: (0)
  • Needs to get out more...
  • *****
  • Posts: 4240
  • Gender: Male
    • SPLRA - Smashing Pumpkins Live Recording Association
Re: MASTER MY RATM RECORDING PLEASE!!
« Reply #11 on: August 09, 2008, 04:28:14 AM »
its the same AT943 source from dime. No idea why it was put on etree.
Please contact me if you've ever taped the Smashing Pumpkins or a related group!

Offline Əkoostikal

  • Trade Count: (1)
  • Taperssection Member
  • ***
  • Posts: 680
  • Gender: Male
  • One of these days....
Re: MASTER MY RATM RECORDING PLEASE!!
« Reply #12 on: August 09, 2008, 05:49:29 PM »
its the same AT943 source from dime. No idea why it was put on etree.

ahh yes, you are correct, I nodded off reading the orig. post and missed his src.

 RATM is not exactly trade friendly are they?
BONGWATER via Etree:

"Phil Keeps on growing, never even slowing, never really knowing all of the minds he's really blowing!!!!!"

Offline newplanet7

  • Hasn't heard a muddy 460/480 tape. EVER. Mike Hawk
  • Trade Count: (5)
  • Needs to get out more...
  • *****
  • Posts: 3530
  • Gender: Male
  • The Place To Be...... Akustische u. Kino-Geräte
Re: MASTER MY RATM RECORDING PLEASE!!
« Reply #13 on: August 09, 2008, 07:17:48 PM »
its the same AT943 source from dime. No idea why it was put on etree.

ahh yes, you are correct, I nodded off reading the orig. post and missed his src.

 RATM is not exactly trade friendly are they?
Not that I know of.
Plus Lollapalooza doesn't allow open taping.
Maybe because it says festival on the torrent?

If so, that's weak sauce and someone should upload some Ribot or Sco(NOT MSMW BECAUSE THEY ARE HORRIBLE) torrents with festival in the torrent tittle.
« Last Edit: August 09, 2008, 07:20:53 PM by newplanet7 »
MILAB VM-44 Classic~> Silver T's~> Busman PMD660
News From Phish: Will tour as opening act for Widespread Panic for Summer
hahaha never happen, PHiSH is waaaaayyyy better the WSP

They both ain't got nothing on MMW... Money spent wisely if you ask me...


FYI, it is a kick ass recording of a bunch of pretend-a-hippies talking.

Offline Taper1

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 50
Re: MASTER MY RATM RECORDING PLEASE!!
« Reply #14 on: August 20, 2008, 01:26:17 AM »
de abbrev's

 

RSS | Mobile
Page created in 0.208 seconds with 43 queries.
© 2002-2024 Taperssection.com
Powered by SMF