Become a Site Supporter and Never see Ads again!
« previous next »
Pages: [1]   Go Down

Author Topic: mic distortion question  (Read 4047 times)

0 Members and 1 Guest are viewing this topic.

Offline dummkopf

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 11
mic distortion question
« on: August 27, 2008, 11:48:38 AM »
so far I got 2 different opinions on this...

can or will a mic with below characteristic leed to distortion in frontrow/onstage taping environments that are loud and electric guitar driven? is 138db usually enough to avoid distortion or not?

Maximum SPL for THD 0.5%  138db
Logged

Offline dummkopf

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 11
Re: mic distortion question
« Reply #1 on: August 27, 2008, 06:06:39 PM »
Quote from: mshilarious on August 27, 2008, 05:58:43 PM
Unless you're within a few feet of a mains cabinet, or inside a kick drum, I would certainly hope so!

Now, at that level the mic will have a very hot output, so you would need to take care not to clip your preamp/converter.
I plan to mount external mics on a video camera so there's no preamp/converter.
Logged

Offline Javier Cinakowski

  • !! Downhill From Here !!
  • Trade Count: (11)
  • Needs to get out more...
  • *****
  • Posts: 4325
  • Gender: Male
Re: mic distortion question
« Reply #2 on: August 27, 2008, 06:19:54 PM »
Quote
I plan to mount external mics on a video camera so there's no preamp/converter.

There is a preamp/converter on your video camera and most video cameras have a tough time handling very loud sources.  Sounds to me like you should be more concerned about the video cameras electronics than the microphone...
Logged
Neumann KM185mp OR DPA ST2015-> Grace Design Lunatec V2-> Tascam DR-100mkIII

Offline dummkopf

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 11
Re: mic distortion question
« Reply #3 on: August 27, 2008, 06:23:13 PM »
Quote from: Javier Cinakowski on August 27, 2008, 06:19:54 PM
Quote
I plan to mount external mics on a video camera so there's no preamp/converter.

There is a preamp/converter on your video camera and most video cameras have a tough time handling very loud sources.  Sounds to me like you should be more concerned about the video cameras electronics than the microphone...
so we are talking about the 'volume in' level control?! I work with a sony A1U. sorry if I sound overly amateurish...

I really appreaciate the advice  :)
Logged

Offline Javier Cinakowski

  • !! Downhill From Here !!
  • Trade Count: (11)
  • Needs to get out more...
  • *****
  • Posts: 4325
  • Gender: Male
Re: mic distortion question
« Reply #4 on: August 27, 2008, 06:28:09 PM »
oh well shit!  THat is an awesome camera!  It has xlr inputs with phantom power.  You should be fine....

What microphone(s) are you using...
Logged
Neumann KM185mp OR DPA ST2015-> Grace Design Lunatec V2-> Tascam DR-100mkIII

Offline dummkopf

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 11
Re: mic distortion question
« Reply #5 on: August 27, 2008, 06:30:56 PM »
Quote from: Javier Cinakowski on August 27, 2008, 06:28:09 PM
oh well shit!  THat is an awesome camera!  It has xlr inputs with phantom power.  You should be fine....

What microphone(s) are you using...
I currently use the one that came with the cam but I am super unhappy with it. no bass at all...

so I am thinking either the Neumann KM184 or some beyer I saw in another thread. haven't made up my mind yet....
Logged

Offline Javier Cinakowski

  • !! Downhill From Here !!
  • Trade Count: (11)
  • Needs to get out more...
  • *****
  • Posts: 4325
  • Gender: Male
Re: mic distortion question
« Reply #6 on: August 27, 2008, 06:33:30 PM »
beyer mc930 ?  good choice!
Logged
Neumann KM185mp OR DPA ST2015-> Grace Design Lunatec V2-> Tascam DR-100mkIII

Offline dummkopf

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 11
Re: mic distortion question
« Reply #7 on: August 27, 2008, 06:36:32 PM »
Quote from: Javier Cinakowski on August 27, 2008, 06:33:30 PM
beyer mc930 ?  good choice!
yes, seems like a good bang for my buck.
Logged

Offline Javier Cinakowski

  • !! Downhill From Here !!
  • Trade Count: (11)
  • Needs to get out more...
  • *****
  • Posts: 4325
  • Gender: Male
Re: mic distortion question
« Reply #8 on: August 27, 2008, 06:51:18 PM »
Good Luck!   T+
Logged
Neumann KM185mp OR DPA ST2015-> Grace Design Lunatec V2-> Tascam DR-100mkIII
Pages: [1]   Go Up
« previous next »
 

RSS | Mobile
Page created in 0.041 seconds with 32 queries.
© 2002-2025 Taperssection.com
Powered by SMF