Become a Site Supporter and Never see Ads again!

Author Topic: Edirol R-09HR - Part THREE  (Read 115640 times)

0 Members and 5 Guests are viewing this topic.

Offline udovdh

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 986
Re: Edirol R-09HR - Part THREE
« Reply #300 on: April 25, 2009, 05:51:45 AM »
HR with 1.05 and a Kingston 16G card.
I notice that after a recording session the HR doesn't want to read the card anymore:
It starts up but 'freezes' at the startupscreen before it shows the first trackname etc.
Removing power revives the HR but doesn't not fix the issue.
My PC can read the card and retrieve the files which are fine.
In a previous occurrence fsck.vfat found two small anomalies with the signature values which were fixed. After that the HR could open and read the card again.

Of course I can reformat the card in the HR and see what happens, but what can I do when this issue keeps happening?

Offline udovdh

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 986
Re: Edirol R-09HR - Part THREE
« Reply #301 on: April 25, 2009, 10:38:13 AM »
Well, it happened again.
I recorded about one hour of soundboard at 88.1/24. The HR would not start fully after coming home and powering up the device.
The PC reads the card fine. `dmesg` shows me:

FAT: Invalid FSINFO signature: 0x41645252, 0x61417272 (sector = 1)

fsck.vfat can fix that but it happens (almost) every time.
Can anybody explain?
Can anybody reproduce this issue?

Also:


# fsck.vfat -a /dev/sde1
dosfsck 3.0.0, 28 Sep 2008, FAT32, LFN
FSINFO sector has bad magic number(s):
  Offset 0: 0x41645252 != expected 0x41615252
  Auto-correcting it.
Free cluster summary wrong (4294967295 vs. really 446653)
  Auto-correcting.
Performing changes.
/dev/sde1: 1 files, 48595/495248 clusters


Does this help?
« Last Edit: April 25, 2009, 10:45:25 AM by udovdh »

Offline Sebastian

  • Trade Count: (7)
  • Taperssection All-Star
  • ****
  • Posts: 1653
  • Gender: Male
    • Riot Audio
Re: Edirol R-09HR - Part THREE
« Reply #302 on: April 26, 2009, 05:10:48 PM »

# fsck.vfat -a /dev/sde1
dosfsck 3.0.0, 28 Sep 2008, FAT32, LFN
FSINFO sector has bad magic number(s):
  Offset 0: 0x41645252 != expected 0x41615252
  Auto-correcting it.
Free cluster summary wrong (4294967295 vs. really 446653)
  Auto-correcting.
Performing changes.
/dev/sde1: 1 files, 48595/495248 clusters


Did you format the card in the R-09HR or in Linux? A bad magic number at sector 0 looks like a formatting "error".

Offline gmm6797

  • Trade Count: (10)
  • Needs to get out more...
  • *****
  • Posts: 3593
  • Gender: Male
  • Schoeps MK4 > nBoxPlat > Sony A10/SDMixPre6/SD 722
    • Homepage
Re: Edirol R-09HR - Part THREE
« Reply #303 on: April 26, 2009, 08:24:39 PM »
just recorded another show with this, and compared to my 722, I am starting to wonder if there should be a "R09 no more than 9" setting... the entire show looks (in sound forge) like there are no highs or lows during the music and I dont get that with the 722 :(

Offline bgalizio

  • Trade Count: (3)
  • Needs to get out more...
  • *****
  • Posts: 3555
  • Gender: Male
    • http://www.archive.org/bookmarks/spyboychoir
Re: Edirol R-09HR - Part THREE
« Reply #304 on: April 26, 2009, 08:33:33 PM »
just recorded another show with this, and compared to my 722, I am starting to wonder if there should be a "R09 no more than 9" setting... the entire show looks (in sound forge) like there are no highs or lows during the music and I dont get that with the 722 :(

What was your gain setting?

Offline gmm6797

  • Trade Count: (10)
  • Needs to get out more...
  • *****
  • Posts: 3593
  • Gender: Male
  • Schoeps MK4 > nBoxPlat > Sony A10/SDMixPre6/SD 722
    • Homepage
Re: Edirol R-09HR - Part THREE
« Reply #305 on: April 26, 2009, 08:40:30 PM »
for the show yesterday, 20

Offline tbrown4

  • Trade Count: (45)
  • Needs to get out more...
  • *****
  • Posts: 2698
  • Gender: Male
    • Tim's Adventures in Sound
Re: Edirol R-09HR - Part THREE
« Reply #306 on: April 26, 2009, 09:19:07 PM »
External mics? Pre-amp...are you using one? What ya got workin?
AKG C460Bs/A61s/CK61s or CK63s -> Naiant LittleBox -> Edirol R09-HR

http://timothydavidbrown.blogspot.com/

FS: Dead Muppets. Custom "dead rat" style windscreen covers
$25/pair, shipped. Various color/pattern choices
Currently not building orders, the "shop" is temporarily closed. Accepting names on a waiting list.
http://taperssection.com/index.php?topic=137563.msg1786318




Offline gmm6797

  • Trade Count: (10)
  • Needs to get out more...
  • *****
  • Posts: 3593
  • Gender: Male
  • Schoeps MK4 > nBoxPlat > Sony A10/SDMixPre6/SD 722
    • Homepage
Re: Edirol R-09HR - Part THREE
« Reply #307 on: April 26, 2009, 11:25:55 PM »
Its all in my sig, but.....
Schoeps MK4 > nBox + > R090HR set to 20 and every switch off

Offline 69mako

  • Trade Count: (2)
  • Taperssection Member
  • ***
  • Posts: 653
Re: Edirol R-09HR - Part THREE
« Reply #308 on: April 27, 2009, 12:09:20 AM »
Were all of your batteries up to snuff?

Mako
http://db.etree.org/69mako

007: Church Audio CA-14c -> Church Audio St-9100 preamp -> R-09HR

Open: Busman BSC1 mics (X2) -> Hydra Cables (X2) -> Tmod R4

Offline gmm6797

  • Trade Count: (10)
  • Needs to get out more...
  • *****
  • Posts: 3593
  • Gender: Male
  • Schoeps MK4 > nBoxPlat > Sony A10/SDMixPre6/SD 722
    • Homepage
Re: Edirol R-09HR - Part THREE
« Reply #309 on: April 27, 2009, 12:21:25 AM »
Yeep, fresh of the charger a couple of hours before the show... the same ones I use all the time with no issues or concerns... meter was down just the little itsy bitsy tick at the beginning (and I have run them down way more than this before)

Offline 69mako

  • Trade Count: (2)
  • Taperssection Member
  • ***
  • Posts: 653
Re: Edirol R-09HR - Part THREE
« Reply #310 on: April 27, 2009, 12:24:43 AM »
Have you tried to repeat the problem at home?  Were all of your connections secure?

http://db.etree.org/69mako

007: Church Audio CA-14c -> Church Audio St-9100 preamp -> R-09HR

Open: Busman BSC1 mics (X2) -> Hydra Cables (X2) -> Tmod R4

Offline udovdh

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 986
Re: Edirol R-09HR - Part THREE
« Reply #311 on: April 27, 2009, 01:49:04 AM »

# fsck.vfat -a /dev/sde1
dosfsck 3.0.0, 28 Sep 2008, FAT32, LFN
FSINFO sector has bad magic number(s):
  Offset 0: 0x41645252 != expected 0x41615252
  Auto-correcting it.
Free cluster summary wrong (4294967295 vs. really 446653)
  Auto-correcting.
Performing changes.
/dev/sde1: 1 files, 48595/495248 clusters


Did you format the card in the R-09HR or in Linux? A bad magic number at sector 0 looks like a formatting "error".
After formatting the card in Linux the HR accepts the card and works well.
Same for formatting the card in the HR (which I tried as well).
After recording some material the situation that I described occurs.

To be sure I can do a test, again:
Format card in HR. Record one hour. Shut down HR. Boot up HR. See if it works or 'freezes'.
Format card in Linux. Record one hour. Shut down HR. Boot up HR. See if it works or 'freezes'.

Offline jobseek2001

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 40
  • I'm a llama!
Re: Edirol R-09HR - Part THREE
« Reply #312 on: April 27, 2009, 01:52:29 AM »
Its all in my sig, but.....
Schoeps MK4 > nBox + > R090HR set to 20 and every switch off
20!? You know what signal that takes for 0dBFS?
And you are using a 'pre'?

Offline Scooter123

  • "I am not an alcoholic. I am a drunk. Drunks don't go to meetings."
  • Trade Count: (9)
  • Needs to get out more...
  • *****
  • Posts: 3909
Re: Edirol R-09HR - Part THREE
« Reply #313 on: April 27, 2009, 02:25:40 AM »
Chris Church told me that the Edirol 0 gain was about a "45" setting; Anything below that and it is attenuating and will add noise. 

Sheesh, I've had the 09 in front of ear bursting stacks at 55 and still had to boost post.  I get huge dynamic range with all my mikes, (mk4, atcmc and dpa), so something is wrong here. 

Not sure whether your N Box has a 20db boost and if so, whether you had it on. 
Regards,
Scooter123

mk41 > N Box  > Sony M-10
mk4 > N Box > Sony M-10

Offline gmm6797

  • Trade Count: (10)
  • Needs to get out more...
  • *****
  • Posts: 3593
  • Gender: Male
  • Schoeps MK4 > nBoxPlat > Sony A10/SDMixPre6/SD 722
    • Homepage
Re: Edirol R-09HR - Part THREE
« Reply #314 on: April 27, 2009, 02:25:59 AM »
Its all in my sig, but.....
Schoeps MK4 > nBox + > R090HR set to 20 and every switch off
20!? You know what signal that takes for 0dBFS?
And you are using a 'pre'?

And no, what level is the 0dbfs???? That was my initial question

The nbox+ is the pre-amp

 

RSS | Mobile
Page created in 0.073 seconds with 44 queries.
© 2002-2024 Taperssection.com
Powered by SMF