Become a Site Supporter and Never see Ads again!

Author Topic: 4 pin assignment ad2k vs ad 500  (Read 1337 times)

0 Members and 1 Guest are viewing this topic.

Offline j5brock

  • Trade Count: (23)
  • Taperssection Member
  • ***
  • Posts: 276
  • Gender: Male
4 pin assignment ad2k vs ad 500
« on: September 21, 2008, 03:32:38 PM »
I just picked up an AD2K and need to put together a power solution. I have an old ad 500 - does anyone know offhand if the pin assignments are the same for the power on these two. I would love to be able to hack the cable off the sla I used for the AD 500 and use it with one of my tekkeon batteries.

Jeff
DPA4023/DPA4028/MK22/MK41 > KC5 > CMC6xt > Kindkable > Opti V3/ACM V3/ > Kindkable interconnect / Hi-Ho Silvers > 744t

Canon 5D3 / 7D / 50D / 24-70L II / 16-35L II/ 17-55 2.8 IS / 70-200 2.8 IS II/ 100-400L / 85 1.2L / 50 1.4 / 300 2.8 IS / 11-16 wide / Zeiss 2.8/21

Playback - foobar > m audio transit / denon 1930ci underwood transport mod > Grace M902 >  ATH W 5000

Offline jerryfreak

  • Trade Count: (30)
  • Needs to get out more...
  • *****
  • Posts: 4218
  • high desert for life
Re: 4 pin assignment ad2k vs ad 500
« Reply #1 on: September 24, 2008, 08:41:15 PM »
ad2k is pin 1 Ground, pin 4 12V and is clearly marked on the unit.

google is your friend:

http://www.apogeedigital.com/pdf/ad500_usersguide.pdf

looks like a funky d-sub input, so it depends how your battery is wired



my facemask is a windscreen

People whose posts I wont see:
capnhook, daspyknows, Melanie, morst, Rob D., Scooter123, Sloan Simpson, Walstib62

 

RSS | Mobile
Page created in 0.029 seconds with 43 queries.
© 2002-2020 Taperssection.com
Powered by SMF