Become a Site Supporter and Never see Ads again!

Author Topic: Some clips from the new AT4022 omnis...  (Read 3767 times)

0 Members and 1 Guest are viewing this topic.

jnorman34

  • Guest
  • Trade Count: (0)
Some clips from the new AT4022 omnis...
« on: October 15, 2008, 01:35:41 AM »
hi guys - i picked up a pair of the new AT4022 omnis to play with, and i posted a couple of clips from them, compared to an ORTF pair of AT4051s here:
http://www.gearslutz.com/board/remote-possibilities-acoustic-music-location-recording/331780-ortf-vs-spaced-pair.html

i'm interested in hearing any opinions or comments.

Offline digifish_music

  • Trade Count: (0)
  • Taperssection All-Star
  • ****
  • Posts: 1016
    • digifish music
Re: Some clips from the new AT4022 omnis...
« Reply #1 on: October 15, 2008, 05:17:26 AM »
hi guys - i picked up a pair of the new AT4022 omnis to play with, and i posted a couple of clips from them, compared to an ORTF pair of AT4051s here:
http://www.gearslutz.com/board/remote-possibilities-acoustic-music-location-recording/331780-ortf-vs-spaced-pair.html

i'm interested in hearing any opinions or comments.

Sounds great to me. Thanks for sharing. Now what would be really interesting is to hear these parallel recorded with AT3032's. BTW: What was the spacing on the omnis?

digifish
- What's this knob do?

jnorman34

  • Guest
  • Trade Count: (0)
Re: Some clips from the new AT4022 omnis...
« Reply #2 on: October 15, 2008, 11:00:58 AM »
the omnis were spaced at about 45cm (18").

Offline digifish_music

  • Trade Count: (0)
  • Taperssection All-Star
  • ****
  • Posts: 1016
    • digifish music
Re: Some clips from the new AT4022 omnis...
« Reply #3 on: October 16, 2008, 01:30:52 AM »
the omnis were spaced at about 45cm (18").

Ok thanks good to know. Where were they in relation to the talent?

digifish
- What's this knob do?

jnorman34

  • Guest
  • Trade Count: (0)
Re: Some clips from the new AT4022 omnis...
« Reply #4 on: October 16, 2008, 11:07:03 AM »
digi - the omnis were about 5 feet out and 6 feet high.  piano was on short stick.  ORTF pair was about 7 feet out.

jnorman34

  • Guest
  • Trade Count: (0)
Re: Some clips from the new AT4022 omnis...
« Reply #5 on: October 30, 2008, 11:03:12 AM »
well,, i have had the chance to use these new 4022s several times now in the studio as a spaced pair to capture piano/flute duos for a variety of players doing auditions and competitions, and wanted to give a bit of follow up on how they are doing. 

i just did a video for a young girl applying to perform on "From the Top".  i recorded the audio separately, and then sync'ed it up with the video (about 30 minutes worth).  again, i set the 4022s up about 6 feet high, and about 5-6 out from the players.  turned out to be some of the best recording like this i have ever done.  huge warm flute sound, nicely diffused, not in-your-face like so many cards i have used in the past for this work (inlcluding DPA 4011s, akg c481s, schoeps cmc64s).  piano is well defined, and overall balance was near perfect.

the mics seem tailored to mid-field (free-field) distance, with a slight rise around 6k, easily controlled with a touch of EQ, so they should be good for a wide variety of applications ranging from near-field work in the studio to diffuse field work in remote venues.  hope this info helps a little for those looking at affordable omnis.

 

RSS | Mobile
Page created in 0.058 seconds with 29 queries.
© 2002-2025 Taperssection.com
Powered by SMF