Become a Site Supporter and Never see Ads again!

Author Topic: best settings....your thoughts  (Read 3269 times)

0 Members and 1 Guest are viewing this topic.

Offline TaperBryan

  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 3977
  • Gender: Male
  • "Vicarious existence is a fucking waste of time"
best settings....your thoughts
« on: December 31, 2008, 04:29:49 PM »
i'm running 483>psp2>v3 tonight.....havent ran the psp2 in awhile.  if memory serves me correctly, the settings on psp2 should be 24/48>-35 mic sens.>off on both channels>0db gain. 

what are some of your thoughts on running psp2>v3 as far as the settings go?

thanks in advance and happy new year all!

Mics:
AKG c480b(ck61/62/63) [2007] / NAIANT/pfa [2020]

Preamps/AD:
EAA PSP-2, Lunatec V3

Recoding Decks:
Sony TCD-D8 DAT [2001] > Nomad JB3 [2007] > Marantz PMD-661 (Oade Bros. Warm Mod) [2011] > Tascam DR-70D [2019] > Sound Devices MixPre 6 II [2026]

Offline sunjan

  • Trade Count: (0)
  • Needs to get out more...
  • *****
  • Posts: 2006
  • Gender: Male
  • Taping since 1988, 28 years of fine recordings...
    • Just a handful of stuff I put on etree
Re: best settings....your thoughts
« Reply #1 on: January 01, 2009, 04:07:25 PM »
i'm running 483>psp2>v3 tonight.....havent ran the psp2 in awhile.  if memory serves me correctly, the settings on psp2 should be 24/48>-35 mic sens.>off on both channels>0db gain. 

what are some of your thoughts on running psp2>v3 as far as the settings go?

I don't have any first hand experience, but you will get more answers if you mention your gear in the subject line.
Mics: A-51s LE, CK 930, Line Audo CM3, AT853Rx (hc,c,sc),  ECM 121, ECM 909A
Pres: Tinybox, CA-9100, UA5 wmod
Recorders: M10, H116 (CF mod), H340, NJB3
Gearbag: High Sierra Corkscrew
MD transfers: MZ-RH1. Tape transfers: Nak DR-1
Photo rig: Nikon D70, 18-70mm/3.5-4.5, SB-800

 

RSS | Mobile
Page created in 0.029 seconds with 25 queries.
© 2002-2026 Taperssection.com
Powered by SMF