Become a Site Supporter and Never see Ads again!
« previous next »
Pages: [1]   Go Down

Author Topic: SBD>MT?  (Read 3990 times)

0 Members and 1 Guest are viewing this topic.

Offline im hungover

  • Trade Count: (1)
  • Taperssection Member
  • ***
  • Posts: 471
  • Gender: Male
SBD>MT?
« on: January 29, 2009, 07:33:18 PM »
so i just got a MT and did my first board patch with it the other night and got insanely hot levels!  ??? ive patched from this board many of times with my jb3 and have not had this problem! and body else have this problem with the MT?

cheers to a sunny day though...
zach 
Logged
Mics: Oktava MK-012, ADK S51, AT853 (cards)

Decks: Fostex FR2-LE & Tascam DR40

Offline tcf

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 274
Re: SBD>MT?
« Reply #1 on: January 30, 2009, 01:15:51 PM »
I had the same problem with my mt.  You pretty much have to attenuate the sbd signal for the mt, to answer your question.
The answer for me was the shure attenuators.  I don't take sbd patches anymore and only used them twice.  They were pretty pricey, if you are interested I will make you a sweet deal on them. 

pm me if you are interested in the shure attenuators.  Bassically buy one and get the other free kind of deal.  Mint condition, used twice.

Peace,
Tom
Logged

Offline yousef

  • Trade Count: (2)
  • Taperssection All-Star
  • ****
  • Posts: 1477
  • Gender: Male
Re: SBD>MT?
« Reply #2 on: January 30, 2009, 01:44:53 PM »
If you've got basic soldering skills you could put a variable attenuator together for pennies. There are plans on TS.com somewhere. Not that I can ever find them when I want them...
Logged
music>other stuff>ears
my recordings: http://db.etree.org/yousef
http://www.manchestertaper.co.uk
twitter: @manchestertaper

Offline im hungover

  • Trade Count: (1)
  • Taperssection Member
  • ***
  • Posts: 471
  • Gender: Male
Re: SBD>MT?
« Reply #3 on: January 30, 2009, 01:47:58 PM »
Quote from: yousef on January 30, 2009, 01:44:53 PM
If you've got basic soldering skills you could put a variable attenuator together for pennies. There are plans on TS.com somewhere. Not that I can ever find them when I want them...
i dont have the skilz but my dad does! i will look into this as well!
Logged
Mics: Oktava MK-012, ADK S51, AT853 (cards)

Decks: Fostex FR2-LE & Tascam DR40

Offline jlykos

  • Trade Count: (6)
  • Needs to get out more...
  • *****
  • Posts: 4416
  • Gender: Male
  • Don't sweat the technique
Re: SBD>MT?
« Reply #4 on: January 31, 2009, 02:18:19 AM »
This may sound crazy, but I have asked the soundboard operator to lower their levels to my deck when I have patched in the past.  They usually are concerned about getting the levels correct for the main act for the first couple minutes, but are more than happy to reduce the output to my deck after that.  You may want to try speaking to the sound man before the show and get everything set up in advance.
Logged
dpa 4061 > Church Audio 9200 > Sony PCM-D50 (Moon Audio Silver Dragon v3 interconnect)

"I have no views," Mickey Melchiondo, known as Dean Ween, said in a philosophical moment. "I am way too stupid. I have no strong feelings about anything. I'm really into television and the computer. I believe everything I see on TV and read on the Internet."

Offline im hungover

  • Trade Count: (1)
  • Taperssection Member
  • ***
  • Posts: 471
  • Gender: Male
Re: SBD>MT?
« Reply #5 on: January 31, 2009, 01:40:58 PM »
hahaha yeah i did that! but after lowering the output drastically it was still almost clipping! oh well it is an easy fix... wondering if the 1/4 inputs on the microtrack will be less hot?
Logged
Mics: Oktava MK-012, ADK S51, AT853 (cards)

Decks: Fostex FR2-LE & Tascam DR40

Offline setboy

  • Trade Count: (5)
  • Needs to get out more...
  • *****
  • Posts: 5117
  • Gender: Male
Re: SBD>MT?
« Reply #6 on: January 31, 2009, 02:49:54 PM »
Quote from: hungover on January 31, 2009, 01:40:58 PM
hahaha yeah i did that! but after lowering the output drastically it was still almost clipping! oh well it is an easy fix... wondering if the 1/4 inputs on the microtrack will be less hot?
was it almost clipping or was it clipping?
Logged

Offline im hungover

  • Trade Count: (1)
  • Taperssection Member
  • ***
  • Posts: 471
  • Gender: Male
Re: SBD>MT?
« Reply #7 on: January 31, 2009, 03:47:24 PM »
Quote from: setboy on January 31, 2009, 02:49:54 PM
Quote from: hungover on January 31, 2009, 01:40:58 PM
hahaha yeah i did that! but after lowering the output drastically it was still almost clipping! oh well it is an easy fix... wondering if the 1/4 inputs on the microtrack will be less hot?
was it almost clipping or was it clipping?
first 2 sets were brickwalled bad and the last set was okay but sound girl turned the levels down big time
Logged
Mics: Oktava MK-012, ADK S51, AT853 (cards)

Decks: Fostex FR2-LE & Tascam DR40

Offline Hman

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 265
  • Gender: Male
Re: SBD>MT?
« Reply #8 on: May 18, 2009, 09:23:15 AM »
I had this problem too in the past..
After the first song (which was of course brickwalling), I putted my ST9100 pre in between, and the problem was gone..  :o :P
Logged
Pages: [1]   Go Up
« previous next »
 

RSS | Mobile
Page created in 0.047 seconds with 33 queries.
© 2002-2025 Taperssection.com
Powered by SMF