Sonosax SX-M2 Users Step Inside

[dennisrtyler]

have you ever run omnis with your sax? if so, what were your thoughts?

[NOLAfishwater]

I ran omni's onstage with the Lemosax and it sounded allsum. Huge soundstage.

[dennisrtyler]

I ran omni's onstage with the Lemosax and it sounded allsum. Huge soundstage.

i'm debating whether to run it with the omnis in OB or just go straight 702. my only worry is that it might add a little too much punch. i could be crazy.

[rich]

fwiw...i ran mk4's > 702 last year from almost dead center and 15 rows behind the board...the recordings i made could use a little more punch...more punch i say. run the sax.

rich

[cfox]

Be careful with the low end on omnis, with the sax or 702, I would def listen to a few selections with rolled off low end before seeding the omnis straight up...

[dennisrtyler]

there will be roll-off and who said anything about seeding them by themselves?

[cfox]

there will be roll-off and who said anything about seeding them by themselves?

2s+4022+4028 ??

[dennisrtyler]

2s+ccm4 via c-link

[Jamie]

I've run 462s>sax>ADK>D8 and 462s>sax>ACM PMD660 (it used to be yours  ) and prefer to roll off the low end with the pad on the mics, especially if you spread them more than 5 or 6 feet.
Jamie

[dennisrtyler]

I've run 462s>sax>ADK>D8 and 462s>sax>ACM PMD660 (it used to be yours  ) and prefer to roll off the low end with the pad on the mics, especially if you spread them more than 5 or 6 feet.
Jamie