Audix m1280 / 1290 Wind Screen

[mterry]

In case anyone has been looking for a GOOD windscreen to fit these puppies, look no further. Its the Audix WS1281, only available from Audix. I looked all over google for any dealers, but going straight to Audix is the best bet.

[Gutbucket]

Can you measure the inside diameter and depth of the bore on these screens?   Considering them for the DPA 4098H if they will fit.  Thanks.

[mccordo]

Can you measure the inside diameter and depth of the bore on these screens?   Considering them for the DPA 4098H if they will fit.  Thanks.

I actually bought Mark's M1280s and am the current owner of those windscreens. The diameter is about 1/4" (with some room for expansion due to the stretchable nature of the foam) and the depth is about 1 3/4". Hope that helps!

[Gutbucket]

Excellent, thanks!

Now I can double check.. might be a bit loose and short on the DPAs

[Life In Rewind]

Are the stock screens ok? I still have them...

Those look nice!

[mccordo]

I've actually got 3 sets of windscreens that fit the Audix M series. The ones pictured above and a smaller set that are about 1/2 the exterior size of the ones I measured for Gutbucket came with the M1280s I got from mterry. I also bought a set of M1290s from the YS that came with the original wood boxes and included a tiny set of windscreens that are much thinner and about 1/2 the size of the smaller set from the M1280s. I don't think I've ever used the smallest set, but the 2 larger sets have worked quite well for me both indoors and outdoors.