Become a Site Supporter and Never see Ads again!
Previous topic - Next topic
Pages: Pages1   Go Down

Author Topic: Manfrotto Nano Clamp 386B  (Read 6,914 times)

0 Members and 1 Guest are viewing this topic.

Offline shaggy

  • Trade Count: (10)
  • Taperssection All-Star
  • ****
  • Posts: 1,929
    • dwonk
Manfrotto Nano Clamp 386B
« on: July 27, 2009, 10:12:51 PM »
Any experiences with these new clamps.  I love the superclamps but I hate carrying them around.  I am just wondering how much of a hit in flexibility one takes if they replace superclamps with nano clamps.  Maybe one of each?


uses: http://static.photo.net/attachments/bboard/00R/00R0I4-74261584.jpg

Logged
www.rockbox.org     www.kexp.org    
vimeo , etree torrents  &   archive.org

Offline bobbygeeWOW

  • Trade Count: (10)
  • Taperssection Member
  • ***
  • Posts: 498
Re: Manfrotto Nano Clamp 386B
« Reply #1 on: July 27, 2009, 11:03:46 PM »
Hey man, the nano's made for tubes between 13mm and 35mm in diameter, or surfaces from 3mm to 21mm.
Pretty much the same bomber functionality but smaller:

Logged

Offline page

  • Trade Count: (25)
  • Needs to get out more...
  • *****
  • Posts: 8,342
  • #TeamRetired
Re: Manfrotto Nano Clamp 386B
« Reply #2 on: July 28, 2009, 12:50:34 AM »
Quote from: bobbygeeWOW on July 27, 2009, 11:03:46 PM
Hey man, the nano's made for tubes between 13mm and 35mm in diameter, or surfaces from 3mm to 21mm.
Pretty much the same bomber functionality but smaller:



Also, a sort of duh difference: supers can sustain around 30lbs of load, the nanos clock in at around 8lbs. You trade versatility and load capability for clamp weight and size.


edit: added size, forgot.  :P
« Last Edit: July 28, 2009, 09:45:47 AM by page »
Logged
"This is a common practice we have on the bus; debating facts that we could easily find through printed material. It's like, how far is it today? I think it's four hours, and someone else comes in at 11 hours, and well, then we'll... just... talk about it..." - Jeb Puryear

"Nostalgia ain't what it used to be." - Jim Williams

Offline moooose

  • Trade Count: (1)
  • Taperssection Regular
  • **
  • Posts: 171
Re: Manfrotto Nano Clamp 386B
« Reply #3 on: July 28, 2009, 01:37:40 AM »
I have one and use it as a tripod replacement both for a camera and for mics. It is very practical (you can attach it almost everywhere, from tubes to table tops), functional (in a couple of seconds you are set) and built like a military tool.
Logged

Offline page

  • Trade Count: (25)
  • Needs to get out more...
  • *****
  • Posts: 8,342
  • #TeamRetired
Re: Manfrotto Nano Clamp 386B
« Reply #4 on: September 10, 2009, 03:18:47 PM »
Holy jebus they are tiny. Mine arrived today and it's just slightly bigger then the circular portion of the shure donuts. Actually the knob on the end gives it more visual presence cause the clamp itself is small.
Logged
"This is a common practice we have on the bus; debating facts that we could easily find through printed material. It's like, how far is it today? I think it's four hours, and someone else comes in at 11 hours, and well, then we'll... just... talk about it..." - Jeb Puryear

"Nostalgia ain't what it used to be." - Jim Williams

Offline spyder9

  • Trade Count: (84)
  • Needs to get out more...
  • *****
  • Posts: 13,317
  • "Are you Zman?"
    • My Archived shows
Re: Manfrotto Nano Clamp 386B
« Reply #5 on: September 10, 2009, 10:25:22 PM »
Looks like a perfect solution for clamping to the top of a stand and running an extension bar.  A standard Rapid adapter would make it slick.

Never liked using a Super clamp up the high on the stand, when I needed to reach out to DFC with a bar.  Too much weight on the stand at 8 ft or higher.

Nice find Andy.  +T
« Last Edit: September 10, 2009, 10:27:56 PM by spyder9 »
Logged

Offline spyder9

  • Trade Count: (84)
  • Needs to get out more...
  • *****
  • Posts: 13,317
  • "Are you Zman?"
    • My Archived shows
Re: Manfrotto Nano Clamp 386B
« Reply #6 on: September 10, 2009, 10:47:38 PM »
Just bought one.  $33.80 shipped

B&H Photo NYC > Fort Lauderdale

Can't wait for it to arrive.   ;D
Logged

Offline page

  • Trade Count: (25)
  • Needs to get out more...
  • *****
  • Posts: 8,342
  • #TeamRetired
Re: Manfrotto Nano Clamp 386B
« Reply #7 on: September 11, 2009, 12:01:17 AM »
Quote from: spyder9 on September 10, 2009, 10:47:38 PM
Just bought one.  $33.80 shipped

B&H Photo NYC > Fort Lauderdale

Can't wait for it to arrive.   ;D

don't forget the 3/8" or 1/4" screw adaptors... I always used the locking hex stud ends with the superclamp and realized as I order it that I'd need (different) adaptors for this.
Logged
"This is a common practice we have on the bus; debating facts that we could easily find through printed material. It's like, how far is it today? I think it's four hours, and someone else comes in at 11 hours, and well, then we'll... just... talk about it..." - Jeb Puryear

"Nostalgia ain't what it used to be." - Jim Williams

Offline spyder9

  • Trade Count: (84)
  • Needs to get out more...
  • *****
  • Posts: 13,317
  • "Are you Zman?"
    • My Archived shows
Re: Manfrotto Nano Clamp 386B
« Reply #8 on: September 11, 2009, 12:45:58 AM »
I have a regular Rapid Adapter with the 3/8 thread. 
Logged
Pages: Pages1   Go Up
Previous topic - Next topic
 

RSS | Mobile
Page created in 0.273 seconds with 32 queries.
© 2002-2026 Taperssection.com
Powered by SMF