Become a Site Supporter and Never see Ads again!
« previous next »
Pages: [1] 2  All   Go Down

Author Topic: Iriver H110 CF mod attempt. 'Disk full error when entering recording'  (Read 9644 times)

0 Members and 1 Guest are viewing this topic.

Offline Neilyboy

  • Trade Count: (14)
  • Taperssection Member
  • ***
  • Posts: 917
  • Gender: Male
Iriver H110 CF mod attempt. 'Disk full error when entering recording'
« on: August 17, 2009, 10:18:12 AM »
Ok so I got my iriver rockboxed. flashed the rom and have it up and running. I bought the same CF card that I did when I did the CF mod to my H320 (8gb transcend). I was getting the ata-80 error when booting so I did the rom flash and was able to boot from rom. If I go into the device info It shows that there is 7.6x gig free. I can copy over music to the device and play/see them in the 'files' menu. If I go to recording and click ok. It loads for about a second and shows the recording screen then comes up with an error over the top that says something like disk full press stop to continue.

has anyone ran into this before? if so what can i do to fix it?

thanks so much
Neil
Logged
Mic's: AKG C214's, Line Audio CM3, AT4041SP, AT853 (C, SC, O), AT943 (C, H)
Pre's: Sound Devices MixPre 2
Rec's: Sony PCM-M10, Edirol R-44, Tascam DR60D MKii, Tascam DR70D x 2

Offline EarlyMorningRain

  • Trade Count: (7)
  • Needs to get out more...
  • *****
  • Posts: 2782
Re: Iriver H110 CF mod attempt. 'Disk full error when entering recording'
« Reply #1 on: August 17, 2009, 10:59:49 PM »
without having my h320 near by, I think you need to do a disk cleanup, or I think it's called something like that. Anyway, that will force the iriver to scan the drive and report what amount of space is being used and how much is free.

When I first got my H320 (from the ys) about a year ago, I got this a handful of times, but haven't gotten this for quite some time now for some reason.....
Logged

Offline petur

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 544
  • Gender: Male
  • wtb: time
Re: Iriver H110 CF mod attempt. 'Disk full error when entering recording'
« Reply #2 on: August 18, 2009, 04:09:48 AM »
you need to go to the System -> Rockbox Info screen (the one that says diskspace and battery charge), and press PLAY there (or maybe NAVI, can't remember 100%) to get a disk rescan.

Windows is a bit messy when you delete files, and it doesn't update the free space counter
Logged

Offline Neilyboy

  • Trade Count: (14)
  • Taperssection Member
  • ***
  • Posts: 917
  • Gender: Male
Re: Iriver H110 CF mod attempt. 'Disk full error when entering recording'
« Reply #3 on: August 18, 2009, 07:44:49 AM »
I am not sure where to do the disk cleanup but its a brand new cf card just out of the package and in system > rockbox info it shows Free: 7.44GB Disk: 7.45GB Buffer: 14.1MB Album Art: 64x64 Version: 3.3.

So it is reporting that there is 7.44GB of disk space left...

any other ideas while i read up on this disk cleanup..

Neil
« Last Edit: August 18, 2009, 07:51:43 AM by Neilyboy »
Logged
Mic's: AKG C214's, Line Audio CM3, AT4041SP, AT853 (C, SC, O), AT943 (C, H)
Pre's: Sound Devices MixPre 2
Rec's: Sony PCM-M10, Edirol R-44, Tascam DR60D MKii, Tascam DR70D x 2

Offline Neilyboy

  • Trade Count: (14)
  • Taperssection Member
  • ***
  • Posts: 917
  • Gender: Male
Re: Iriver H110 CF mod attempt. 'Disk full error when entering recording'
« Reply #4 on: August 18, 2009, 08:20:39 AM »
I did a disk scan still no go.... (its play on the rockbox info screen)... anyway.. I also tried formatting the CF card re-starting from scratch.. One thing I did was to boot into rockbox. delete the .rockbox folder then plug up the iriver to my computer and ran the auto installer for rockbox. I had it just install rockbox (basically just downloading and extracting the .rockbox folder). I then had it finish that the Iriver said something like settings change please reboot. I had it reboot and the damn thing worked until I then shut it down and rebooted... since the reboot I am still getting 'disk full' error when entering the recording screen....

Neil
Logged
Mic's: AKG C214's, Line Audio CM3, AT4041SP, AT853 (C, SC, O), AT943 (C, H)
Pre's: Sound Devices MixPre 2
Rec's: Sony PCM-M10, Edirol R-44, Tascam DR60D MKii, Tascam DR70D x 2

Offline petur

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 544
  • Gender: Male
  • wtb: time
Re: Iriver H110 CF mod attempt. 'Disk full error when entering recording'
« Reply #5 on: August 19, 2009, 03:28:29 AM »
This is very strange. Is this with the current RB release or daily build?

EDIT: ah, I see you gave more details on the rockbox forum...
« Last Edit: August 19, 2009, 03:31:25 AM by petur »
Logged

Offline Neilyboy

  • Trade Count: (14)
  • Taperssection Member
  • ***
  • Posts: 917
  • Gender: Male
Re: Iriver H110 CF mod attempt. 'Disk full error when entering recording'
« Reply #6 on: August 19, 2009, 07:09:48 AM »
Yeah I will get any more info needed. I have tried downgrading from the current build to 3.3 to 3.1 to 2.0. The funny thing is it has to work because if I hook it up to pc through usb delete the .rockbox dir then replace it with a different version say i go from 3.3 to 3.2 or 3.2 to 3.3. Once I pull the usb the device says system change reboot or something similar. I tell it NAVI to accept. It just does a quick restart and comes right back up. If I enter the recording window from here it works perfectly I could sit and record all day long. But the second I turn it off and back on again I get the amazing 'Disk full error'...

Any other suggestions? should I try downgrading the bootloader or would this have nothing to do with it?
If so whats the quickest way to do that?

Neil
Logged
Mic's: AKG C214's, Line Audio CM3, AT4041SP, AT853 (C, SC, O), AT943 (C, H)
Pre's: Sound Devices MixPre 2
Rec's: Sony PCM-M10, Edirol R-44, Tascam DR60D MKii, Tascam DR70D x 2

Offline petur

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 544
  • Gender: Male
  • wtb: time
Re: Iriver H110 CF mod attempt. 'Disk full error when entering recording'
« Reply #7 on: August 20, 2009, 03:45:34 AM »
I'm beginning to think you're just running an incompatible version from ROM, not the latest one on 'disk'. I think the CFMod RB wiki article talks about what and how to install on a h1x0. It differs from the h3x0 because the h1x0 bootloader is a bit more advanced AND rockbox on the h1x0 can flash firmwares itself.
Logged

Offline Neilyboy

  • Trade Count: (14)
  • Taperssection Member
  • ***
  • Posts: 917
  • Gender: Male
Re: Iriver H110 CF mod attempt. 'Disk full error when entering recording'
« Reply #8 on: August 20, 2009, 08:52:01 AM »
I have run the rombox. flash from the current build as well as rockbox.iriver.. is there something else I should try?

Neil
« Last Edit: August 20, 2009, 09:05:32 AM by Neilyboy »
Logged
Mic's: AKG C214's, Line Audio CM3, AT4041SP, AT853 (C, SC, O), AT943 (C, H)
Pre's: Sound Devices MixPre 2
Rec's: Sony PCM-M10, Edirol R-44, Tascam DR60D MKii, Tascam DR70D x 2

Offline sunjan

  • Trade Count: (0)
  • Needs to get out more...
  • *****
  • Posts: 2006
  • Gender: Male
  • Taping since 1988, 28 years of fine recordings...
    • Just a handful of stuff I put on etree
Re: Iriver H110 CF mod attempt. 'Disk full error when entering recording'
« Reply #9 on: August 21, 2009, 03:56:48 AM »
Quote from: Neilyboy on August 17, 2009, 10:18:12 AM
I bought the same CF card that I did when I did the CF mod to my H320 (8gb transcend). I was getting the ata-80 error when booting...

Maybe this is a long shot, but you shouldn't take for granted that the CF card is compatible. Different brands work on different models:
http://www.rockbox.org/twiki/bin/view/Main/CFModGuide#Compatibility_Chart

Perhaps you can get/borrow another known good brand, and test booting with that CF card instead?
Logged
Mics: A-51s LE, CK 930, Line Audo CM3, AT853Rx (hc,c,sc),  ECM 121, ECM 909A
Pres: Tinybox, CA-9100, UA5 wmod
Recorders: M10, H116 (CF mod), H340, NJB3
Gearbag: High Sierra Corkscrew
MD transfers: MZ-RH1. Tape transfers: Nak DR-1
Photo rig: Nikon D70, 18-70mm/3.5-4.5, SB-800

Offline petur

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 544
  • Gender: Male
  • wtb: time
Re: Iriver H110 CF mod attempt. 'Disk full error when entering recording'
« Reply #10 on: August 21, 2009, 03:58:02 AM »
are there cards that don't work? IMHO they should all work fine... Maybe a very slow one might get you into troubles
Logged

Offline sunjan

  • Trade Count: (0)
  • Needs to get out more...
  • *****
  • Posts: 2006
  • Gender: Male
  • Taping since 1988, 28 years of fine recordings...
    • Just a handful of stuff I put on etree
Re: Iriver H110 CF mod attempt. 'Disk full error when entering recording'
« Reply #11 on: August 21, 2009, 04:28:54 AM »
Quote from: petur on August 21, 2009, 03:58:02 AM
are there cards that don't work? IMHO they should all work fine... Maybe a very slow one might get you into troubles

I had two different Lexar cards being non-functional and giving me weird error messages before I moved to ADATA. So there are incompatible CF brands, for sure.

Also, the OP should be aware that the H110 contains different hardware than the H120/H140 models. It's not just the same machine with a smaller harddisk, the cache level is different etc.
So the OP shouldn't take for granted that everything is equal. Of course, Petur and the real rockbox guys could give more insight into this.
Logged
Mics: A-51s LE, CK 930, Line Audo CM3, AT853Rx (hc,c,sc),  ECM 121, ECM 909A
Pres: Tinybox, CA-9100, UA5 wmod
Recorders: M10, H116 (CF mod), H340, NJB3
Gearbag: High Sierra Corkscrew
MD transfers: MZ-RH1. Tape transfers: Nak DR-1
Photo rig: Nikon D70, 18-70mm/3.5-4.5, SB-800

Offline EarlyMorningRain

  • Trade Count: (7)
  • Needs to get out more...
  • *****
  • Posts: 2782
Re: Iriver H110 CF mod attempt. 'Disk full error when entering recording'
« Reply #12 on: August 21, 2009, 10:46:46 AM »
FWIW, my H320 was already CF modded when I bought it (had a 4 gig card in it), but when I went to upgrade that to a larger (8gig) card, I swear that card did not work no matter what I tried. So I bought a yet larger card (16gig) and that install went just like it should.

I ended up selling that 8gig card to Chuck I believe, who had no problems getting that to work in his H120. Maybe he can confirm there.

I don't remember what make/model that 8gig card was, but the 16gig I bought (and worked fine) was a Kingston card.

That would leave me to believe that there are indeed differences in the hardware across the different models of the iRivers

Logged

Offline Neilyboy

  • Trade Count: (14)
  • Taperssection Member
  • ***
  • Posts: 917
  • Gender: Male
Re: Iriver H110 CF mod attempt. 'Disk full error when entering recording'
« Reply #13 on: August 21, 2009, 01:36:10 PM »
Very strange. well I used this same exact card to mod my h320 (thats why I bought it as I figured it was 'rockbox' compatible). It is a Transcend 8GB 133X.

I have a SanDisk Ultra II 512MB card that I just tried and when I power it on it just says no partition found. So I then went to the only other card I own which is an older slower SanDisk 1GB CF which produced the same error 'no partition found'.

So it looks like im going to have to yet again try a different card. I have a different CF to IDE adapter on order (should be here today or tomorrow). maybe that could be the issue??

Neil
Logged
Mic's: AKG C214's, Line Audio CM3, AT4041SP, AT853 (C, SC, O), AT943 (C, H)
Pre's: Sound Devices MixPre 2
Rec's: Sony PCM-M10, Edirol R-44, Tascam DR60D MKii, Tascam DR70D x 2

Offline petur

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 544
  • Gender: Male
  • wtb: time
Re: Iriver H110 CF mod attempt. 'Disk full error when entering recording'
« Reply #14 on: August 24, 2009, 03:33:34 AM »
the CF-IDE adapter is passive, so unless there was a fault in it, it shouldn't matter

Weird thing about cards not working... All cards I can get my hands on here work fine :/
Logged
Pages: [1] 2  All   Go Up
« previous next »
 

RSS | Mobile
Page created in 0.047 seconds with 38 queries.
© 2002-2025 Taperssection.com
Powered by SMF