Become a Site Supporter and Never see Ads again!
« previous next »
Pages: 1 [2]  All   Go Down

Author Topic: Recorder that supplies phantom to mini stereo jack?  (Read 9129 times)

0 Members and 1 Guest are viewing this topic.

Offline fmaderjr

  • Trade Count: (16)
  • Taperssection All-Star
  • ****
  • Posts: 1966
Re: Recorder that supplies phantom to mini stereo jack?
« Reply #15 on: February 13, 2010, 12:10:16 PM »
No problem. It's easy to get confused. Many manufacturers don't even tell you the plug in power voltage. I got most of my info from guysonic's reviews.
Logged
AT853's (all caps)/CM-300 Franken Naks (CP-1,2,3)/JBMod Nak 700's (CP-701,702) > Tascam DR-680
Or Sonic Studios DSM-6 > M10

Offline willndmb

  • Trade Count: (17)
  • Needs to get out more...
  • *****
  • Posts: 6821
  • Gender: Male
Re: Recorder that supplies phantom to mini stereo jack?
« Reply #16 on: February 15, 2010, 12:47:52 PM »
fwiw
the mt1 does not supply true 48v, its only like 30
Logged
Mics - AKG ck61/ck63 (c480b & Naiant actives), SP-BMC-2
XLR Cables - Silver Path w/Darktrain stubbies
Interconnect Cables - Dogstar (XLR), Darktrain (RCA > 1/8) (1/8 > 1/8), and Kind Kables (1/8f > 1/4)
Preamps - Naiant Littlebox & Tinybox
Recorders - PCM-M10 & DR-60D

Offline fmaderjr

  • Trade Count: (16)
  • Taperssection All-Star
  • ****
  • Posts: 1966
Re: Recorder that supplies phantom to mini stereo jack?
« Reply #17 on: February 15, 2010, 02:10:54 PM »
Correct about the 30 volts phantom power on MT 2496. I glossed over that because he really needs 5 volts or more plug in power to run the DPA 4060 series and the MTs do provide 5 volts plug in power.
Logged
AT853's (all caps)/CM-300 Franken Naks (CP-1,2,3)/JBMod Nak 700's (CP-701,702) > Tascam DR-680
Or Sonic Studios DSM-6 > M10

Offline goodcooker

  • Trade Count: (47)
  • Needs to get out more...
  • *****
  • Posts: 5099
  • Gender: Male
  • goes to 11
Re: Recorder that supplies phantom to mini stereo jack?
« Reply #18 on: February 15, 2010, 05:27:36 PM »
Darktrain is correct the Marantz 620 supplies 5V plug in power on the mic input which is plenty to power the DPA 406x mics. Worked great when I did it...sounded a little bright for my taste but that's the mics not the recorder.
Logged
http://www.archive.org/bookmarks/goodcooker

"Are you the Zman?" - fan at Panic 10-08-10 Kansas City
"I don't know who left this perfectly good inflatable wook doll here, but if I'm blowing her up, I'm keeping her." -  hoppedup

Offline boojum

  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 3629
  • Gender: Male
Re: Recorder that supplies phantom to mini stereo jack?
« Reply #19 on: February 18, 2010, 02:53:18 AM »
The DPA 406n's run on 5 -9 volts, I believe.  Part of the XLR adapter has the circuitry to step the voltage down.  Check the DPA page specs for these little mics before you wind up with two tiny firecrackers that used to be mics.
Logged
Nov schmoz kapop.
Pages: 1 [2]  All   Go Up
« previous next »
 

RSS | Mobile
Page created in 0.081 seconds with 29 queries.
© 2002-2025 Taperssection.com
Powered by SMF