Topic: Insight into correcting incorrect bit fequency in post sought.

[slightlys]

I made recording last summer and it sounds like Alivin and the chipmunks or in other words  when I played it back the track is playing faster then it should be. I recorded it with  UA-5 > h120. I was certain I had both the iriver and UA-5 set to 16/44.1 but since this is the end result I'm guessing human error came into play. My question now is: Are there any way to correct this problem in post? Time stretch? I could clip up a sample and post it if necessary. I know that I never adjusted the setting on the UA-5 and this is the only band form the festival that turned out this way. So that leads me to believe I fudged up the settings on the iriver during this set.

[slightlys]

I use Wavelab 6 for my post processing.

[Brian Skalinder]

Probably just a mis-match between the WAV header and data.  Fixing the header should do the trick.  Check the sticky at the top of the forum for a thread about recordings that sound too fast / too slow.

[slightlys]

Thanks Bri, I'll give it a try this evening.