Become a Site Supporter and Never see Ads again!

Author Topic: Super Clamps  (Read 5674 times)

0 Members and 1 Guest are viewing this topic.

Online tim in jersey

  • Site Supporter
  • Trade Count: (8)
  • Needs to get out more...
  • *
  • Posts: 3804
  • Gender: Male
Re: Super Clamps
« Reply #15 on: February 22, 2011, 02:31:56 AM »
I prefer the indexed/ratchet lever handle over the t-handle because:

I can get an extra 1/2 or whole turn or maybe 2 or even 3 in tight clamping situations

The lever is longer than the t-handle, providing a mechanical advantage; I can crank that sucker down *tight*. four fingers and an opposing digit yields much more torque-power than a thumb and the index and middle finger can.

I can swing the arm out of the way once properly clamped. I've had issues in the past where the position of the lever snagged coats/purses and/or stuck out in walkways causing a trip hazard.

In reserved seating situations with an extension pole clamped to an arm rest I've been shut down because the patron next to me bitched about the handle poking them in the ribs (and rightfully so). With the indexed handle, I can swing the handle parallel to the arm rest or at least where it pokes my thigh or ribcage not theirs.

Offline Brian E.

  • Trade Count: (2)
  • Needs to get out more...
  • *****
  • Posts: 4097
  • Gender: Male
  • is chicago.... is not chicago....
Re: Super Clamps
« Reply #16 on: February 23, 2011, 12:25:15 PM »
thanks for all the tips


anyone have a favorite telescoping arm?  I'd only be using CA-14's on a t-bar, so I wouldn't need too much strength.
my tapes:  The Archive | Dime | Etree

Recorder - Sony PCM A-10 | Cans - Shure SE535 | Mics - CA-14 Cards | Canon EOS 5D Mark II 17-40L f4 50 f1.4 70-200L f2.8 IS II 430EX II

Offline Brian E.

  • Trade Count: (2)
  • Needs to get out more...
  • *****
  • Posts: 4097
  • Gender: Male
  • is chicago.... is not chicago....
Re: Super Clamps
« Reply #17 on: February 24, 2011, 11:17:37 AM »
need a suggestion for a telescoping arm for the super clamp, so I can get this ordered!  Thanks :)
my tapes:  The Archive | Dime | Etree

Recorder - Sony PCM A-10 | Cans - Shure SE535 | Mics - CA-14 Cards | Canon EOS 5D Mark II 17-40L f4 50 f1.4 70-200L f2.8 IS II 430EX II

Offline acidjack

  • Site Supporter
  • Trade Count: (37)
  • Needs to get out more...
  • *
  • Posts: 5845
  • Gender: Male
Re: Super Clamps
« Reply #18 on: February 24, 2011, 11:37:03 AM »
Manfrotto 099B is the gold standard.  Mine never fails.
Mics: Schoeps MK4V, MK41V, MK5, MK22> CMC6, KCY 250/5, KC5, NBob; MBHO MBP603/KA200N, AT 3031, DPA 4061 w/ d:vice, Naiant X-X, AT 853c, shotgun, Nak300
Pres/Power: Aerco MP2, tinybox v2  [KCY], CA-UBB
Decks: Sound Devices MixPre 6, Zoom F8, M10, D50

My recordings on nyctaper.com: http://www.nyctaper.com/?tag=acidjack | LMA: http://www.archive.org/bookmarks/acidjack | twitter: http://www.twitter.com/acidjacknyc | Soundcloud: https://soundcloud.com/acidjacknyc

Offline twatts (pants are so over-rated...)

  • <://PHiSH//><
  • Trade Count: (16)
  • Needs to get out more...
  • *****
  • Posts: 9941
  • Gender: Male
  • Lego made a Mini-Fig of me!
Re: Super Clamps
« Reply #19 on: February 24, 2011, 11:40:47 AM »
need a suggestion for a telescoping arm for the super clamp, so I can get this ordered!  Thanks :)

I think it will depend on what you want to do:  http://www.bhphotovideo.com/c/buy/Mic-Stands-Boom-Arms/ci/14715/N/4290441648

***Do you have PHISH, VIDA BLUE, JAZZ MANDOLIN PROJECT or any other Phish related DATs/Tapes/MDs that need to be transferred???  I can do them for you!!!***

I will return your DATs/Tapes/MDs.  I'll also provide Master FLAC files via DropBox.  PM me for details.

Sony PCM R500 > SPDIF > Tascam HD-P2
Nakamichi DR-3 > (Oade Advanced Concert Mod) Tascam HD-P2
Sony MDS-JE510 > Hosa ODL-276 > Tascam HD-P2

******

Offline flipp

  • resident curmudgeon
  • Trade Count: (17)
  • Needs to get out more...
  • *****
  • Posts: 4285
Re: Super Clamps
« Reply #20 on: February 24, 2011, 11:44:21 AM »
How much reach do you need?
Are you seeking an articulated arm or just an extension?
If the latter, check the following thread you marked for a couple of suggestions, http://taperssection.com/index.php?topic=110425.0;all
If the former follow the link in naked twatts post or search B&H for acidjack's suggestion or search B&H for "articulated arm".

Offline Brian E.

  • Trade Count: (2)
  • Needs to get out more...
  • *****
  • Posts: 4097
  • Gender: Male
  • is chicago.... is not chicago....
Re: Super Clamps
« Reply #21 on: February 24, 2011, 11:53:32 AM »
Looking for something that will go maybe 5 feet tops, and doesn't need to hold more than 10lb tops, maybe less.
my tapes:  The Archive | Dime | Etree

Recorder - Sony PCM A-10 | Cans - Shure SE535 | Mics - CA-14 Cards | Canon EOS 5D Mark II 17-40L f4 50 f1.4 70-200L f2.8 IS II 430EX II

Offline ArchivalAudio

  • Trade Count: (19)
  • Needs to get out more...
  • *****
  • Posts: 2891
  • Gender: Male
  • Teams Milab | MBHO | TeamVW:2011 Touareg TDI
Re: Super Clamps
« Reply #22 on: February 25, 2011, 02:35:47 AM »
maybe too late for the super clamp but there is an "Impact" clamp at B&H for $20
http://www.bhphotovideo.com/bnh/controller/home?O=WishList.jsp&A=details&Q=&sku=371927&is=REG

also a Matthews Telescopic Baby Stand Extension - 18 - 54"
$28.50

http://www.bhphotovideo.com/bnh/controller/home?O=WishList.jsp&A=details&Q=&sku=33185&is=REG
~ Archival Audio ~
Archiving Worthy Music
since 1986 & digitally since 1995

https://www.facebook.com/ArchivalAudio/

Main Mics: Milab VM-44 Links • Milab DC-196's (Matched  Pair)  • MBHO KA500 or KA300 •
PreAmps:  BaybNbox  • Naiant LittleBox • Naiant [Milab VM44] TinyBox • Naiant PIPsqueak
Recorders: MixPre 10T •  Tascam DR-100 mkIII • Sony A-10 • Sony M-10 

macMini 3Ghz i7 16GB Ram 500GB SSD • MOTU UltraLite
Naiant MSH-2's •   TOA K1's • Beyer TG 153c's •  AT 853 (4.7kmod darktrain) • Countryman B3's (1 k mod)  + other assorted mics

Offline Brian E.

  • Trade Count: (2)
  • Needs to get out more...
  • *****
  • Posts: 4097
  • Gender: Male
  • is chicago.... is not chicago....
Re: Super Clamps
« Reply #23 on: February 25, 2011, 09:10:41 AM »
thanks - i ordered a Manfrotto with the indexing handle, and that Matthews arm you posted.
my tapes:  The Archive | Dime | Etree

Recorder - Sony PCM A-10 | Cans - Shure SE535 | Mics - CA-14 Cards | Canon EOS 5D Mark II 17-40L f4 50 f1.4 70-200L f2.8 IS II 430EX II

 

RSS | Mobile
Page created in 0.065 seconds with 32 queries.
© 2002-2024 Taperssection.com
Powered by SMF