0 Members and 4 Guests are viewing this topic.
I don't have a lathe, so the prototype is only drilled. The drawings in #106 are not accurate, you need to start with what I posted.
If this does come to fruition, I would DEF get back on Team AKG In addition to Team Schoeps, of course
Quote from: ts on October 26, 2011, 10:56:43 AMQuote from: mshilarious on October 26, 2011, 09:35:19 AMI don't have a lathe, so the prototype is only drilled. The drawings in #106 are not accurate, you need to start with what I posted.According to my young apprentice, the two ems images contain all the info he needs. Does the bottom portion of the colette need threads?No, just the top, the Binder is retained with an external nut. If he wants to bang out a couple of those to send me I can send him the tap.
Quote from: mshilarious on October 26, 2011, 09:35:19 AMI don't have a lathe, so the prototype is only drilled. The drawings in #106 are not accurate, you need to start with what I posted.According to my young apprentice, the two ems images contain all the info he needs. Does the bottom portion of the colette need threads?
Two units in aluminum will do . . . they will go to Chuck for evaluation once stuffed.There are two versions I posted though, you'll need to decide which you like better. For the test units, the regular version (not narrow) requires less machine work.The indicated price on eMachine Shop for 50 units in brass is about $6 per unit, although I don't trust that program or its pricing tool . . .