Become a Site Supporter and Never see Ads again!

Author Topic: Need help with Clamp and extension pole  (Read 30065 times)

0 Members and 1 Guest are viewing this topic.

Offline macdaddy

  • Trade Count: (10)
  • Needs to get out more...
  • *****
  • Posts: 7657
Re: Need help with Clamp and extension pole
« Reply #30 on: September 28, 2011, 08:06:08 PM »
Yeah. But it actually isn't that much of a pita to carry. And it can grab stuff that a superclamp cannot. My only problem is that the 99b fits a bit loosely on the head. I assume wrapping the head tightly with some duct tape should do the trick, but I haven't done it yet...
-macdaddy ++

akg c422 > s42 > lunatec v2 > ad2k+ > roland r-44

Offline mattmiller

  • Trade Count: (20)
  • Taperssection All-Star
  • ****
  • Posts: 1460
  • Gender: Male
Re: Need help with Clamp and extension pole
« Reply #31 on: September 28, 2011, 08:16:53 PM »
Yeah. But it actually isn't that much of a pita to carry. And it can grab stuff that a superclamp cannot. My only problem is that the 99b fits a bit loosely on the head. I assume wrapping the head tightly with some duct tape should do the trick, but I haven't done it yet...

That's odd -- I'll have to check that out.  I thought these dimensions were all standardized and fit securely.  I've actually never even used my 99B extension, as I have a smaller Matthews extension that has been tall enough for all the scenarios I've found myself in thus far.
Mics: Neumann KM100 (x4), AK40 (x2), AK50 (x2)
Pre: Lunatec V3
Recorders: Tascam DR-680, Tascam HD-P2 (x2), Sony PCM-M10

Offline Myco

  • Trade Count: (13)
  • Needs to get out more...
  • *****
  • Posts: 7591
  • Gender: Male
Re: Need help with Clamp and extension pole
« Reply #32 on: September 30, 2011, 08:22:52 AM »
I use this clamp with the Manfrotto 099B. I used it recently @ the Orpheum in Boston to hold the 099B on the rail hanging down beneath the lip of the balcony. On this I had a Gak omni bar with a pair of Gefell m270's, and a clamp with a shure vert bar holding my gefell M200's. All of this was a fair amount of weight to hang over peoples heads, and the venue heads came to check it out, but they saw that it was safe & secure  and gave it the OK. I used a safety cable and gaff taped connections also. You can go as big as 2 1/2" with this one, as opposed to the SuperClamps 1 1/2".

http://www.bhphotovideo.com/c/product/124734-REG/Avenger_D230_Super_Clamp_Grip_Head.html#accessories
Microtech Gefell M200: M20/M21/M27 caps> Bumblebee MiAGi-II/Darktrain silver cable's/"Chuck" Belden cables> Aerco MP-2 or Busman modded DR-680 pre-amps> Darktrain cables & interconnects> Tascam DR-680 (Busman mod)
AT853's(card's/hyper's)>AT8533x>Aerco MP-2>Sony M10

Offline acidjack

  • Site Supporter
  • Trade Count: (37)
  • Needs to get out more...
  • *
  • Posts: 5845
  • Gender: Male
Re: Need help with Clamp and extension pole
« Reply #33 on: September 30, 2011, 12:13:17 PM »
I use this clamp with the Manfrotto 099B. I used it recently @ the Orpheum in Boston to hold the 099B on the rail hanging down beneath the lip of the balcony. On this I had a Gak omni bar with a pair of Gefell m270's, and a clamp with a shure vert bar holding my gefell M200's. All of this was a fair amount of weight to hang over peoples heads, and the venue heads came to check it out, but they saw that it was safe & secure  and gave it the OK. I used a safety cable and gaff taped connections also. You can go as big as 2 1/2" with this one, as opposed to the SuperClamps 1 1/2".

http://www.bhphotovideo.com/c/product/124734-REG/Avenger_D230_Super_Clamp_Grip_Head.html#accessories

Wow... that is bold.  Even if not extended, the 099B is pretty big and long.   
Mics: Schoeps MK4V, MK41V, MK5, MK22> CMC6, KCY 250/5, KC5, NBob; MBHO MBP603/KA200N, AT 3031, DPA 4061 w/ d:vice, Naiant X-X, AT 853c, shotgun, Nak300
Pres/Power: Aerco MP2, tinybox v2  [KCY], CA-UBB
Decks: Sound Devices MixPre 6, Zoom F8, M10, D50

My recordings on nyctaper.com: http://www.nyctaper.com/?tag=acidjack | LMA: http://www.archive.org/bookmarks/acidjack | twitter: http://www.twitter.com/acidjacknyc | Soundcloud: https://soundcloud.com/acidjacknyc

Offline vanark

  • TDS
  • Trade Count: (29)
  • Needs to get out more...
  • *****
  • Posts: 8967
  • If you ain't right, you better get right!
    • The Mudboy Grotto - North Mississippi Allstar fan site
Re: Need help with Clamp and extension pole
« Reply #34 on: September 30, 2011, 12:28:08 PM »
I saw Myco's set up and it sure seemed solid as a rock.
If you have a problem relating to the Live Music Archive (http://www.archive.org/details/etree) please send an e-mail to us admins at LMA(AT)archive(DOT)org or post in the LMA thread here and we'll get on it. LMA FAQ: https://help.archive.org/help/live-music-archive-etree-org/

Link to LMA Recordings

Link to Team Dirty South Recordings on the LMA

Mics: Microtech Gefell M21 (with Nbob actives) | Church Audio CA-11 (cards) (with CA UBB)
Pres: babynbox
Recorders: Tascam DR-60D | Tascam DR-40 | Sony PCM-A10 | Edirol R-4

Offline bryonsos

  • Omni addict
  • Trade Count: (28)
  • Needs to get out more...
  • *****
  • Posts: 2061
  • Gender: Male
  • If it's important, tell me to write it down.
    • LMA uploads
Re: Need help with Clamp and extension pole
« Reply #35 on: September 30, 2011, 01:16:05 PM »
Can someone please post a link to a safety cable? I believe I need one of those rascals. Thanks in advance!
Mics: 3 Zigma Chi HA-FX (COL-251, c, h, o-d, o-f) / Avenson STO-2 / Countryman B3s
Pres: CA-Ugly / Naiant Tinyhead / SD MixPre
Decks: Roland R-44 / Sony PCM-M10
GAKables
Dead Muppets

My recordings LMA / BT / TTD

Offline acidjack

  • Site Supporter
  • Trade Count: (37)
  • Needs to get out more...
  • *
  • Posts: 5845
  • Gender: Male
Re: Need help with Clamp and extension pole
« Reply #36 on: September 30, 2011, 01:40:21 PM »
I saw Myco's set up and it sure seemed solid as a rock.

Oh no doubt - I wasn't criticizing, just in awe/respect  ;D
Mics: Schoeps MK4V, MK41V, MK5, MK22> CMC6, KCY 250/5, KC5, NBob; MBHO MBP603/KA200N, AT 3031, DPA 4061 w/ d:vice, Naiant X-X, AT 853c, shotgun, Nak300
Pres/Power: Aerco MP2, tinybox v2  [KCY], CA-UBB
Decks: Sound Devices MixPre 6, Zoom F8, M10, D50

My recordings on nyctaper.com: http://www.nyctaper.com/?tag=acidjack | LMA: http://www.archive.org/bookmarks/acidjack | twitter: http://www.twitter.com/acidjacknyc | Soundcloud: https://soundcloud.com/acidjacknyc

Offline Myco

  • Trade Count: (13)
  • Needs to get out more...
  • *****
  • Posts: 7591
  • Gender: Male
Re: Need help with Clamp and extension pole
« Reply #37 on: September 30, 2011, 01:46:29 PM »
Can someone please post a link to a safety cable? I believe I need one of those rascals. Thanks in advance!

Here's one. Some people jury-rig other things to work the same way, but you'll see what I mean.

http://www.bhphotovideo.com/c/product/634747-REG/Matthews_6348_1_100_Safety_Cable.html

Here is another one.

http://www.bhphotovideo.com/c/product/5026-REG/Manfrotto_FF3276_FF3276_Steel_Safety_Cable.html
« Last Edit: September 30, 2011, 01:52:50 PM by Myco »
Microtech Gefell M200: M20/M21/M27 caps> Bumblebee MiAGi-II/Darktrain silver cable's/"Chuck" Belden cables> Aerco MP-2 or Busman modded DR-680 pre-amps> Darktrain cables & interconnects> Tascam DR-680 (Busman mod)
AT853's(card's/hyper's)>AT8533x>Aerco MP-2>Sony M10

Offline bryonsos

  • Omni addict
  • Trade Count: (28)
  • Needs to get out more...
  • *****
  • Posts: 2061
  • Gender: Male
  • If it's important, tell me to write it down.
    • LMA uploads
Re: Need help with Clamp and extension pole
« Reply #38 on: September 30, 2011, 02:00:49 PM »
Thanks! I just had a "doh!" moment, I searched for it in mics rather than lighting.
Mics: 3 Zigma Chi HA-FX (COL-251, c, h, o-d, o-f) / Avenson STO-2 / Countryman B3s
Pres: CA-Ugly / Naiant Tinyhead / SD MixPre
Decks: Roland R-44 / Sony PCM-M10
GAKables
Dead Muppets

My recordings LMA / BT / TTD

Offline Myco

  • Trade Count: (13)
  • Needs to get out more...
  • *****
  • Posts: 7591
  • Gender: Male
Re: Need help with Clamp and extension pole
« Reply #39 on: September 30, 2011, 02:02:10 PM »
I use this clamp with the Manfrotto 099B. I used it recently @ the Orpheum in Boston to hold the 099B on the rail hanging down beneath the lip of the balcony. On this I had a Gak omni bar with a pair of Gefell m270's, and a clamp with a shure vert bar holding my gefell M200's. All of this was a fair amount of weight to hang over peoples heads, and the venue heads came to check it out, but they saw that it was safe & secure  and gave it the OK. I used a safety cable and gaff taped connections also. You can go as big as 2 1/2" with this one, as opposed to the SuperClamps 1 1/2".

http://www.bhphotovideo.com/c/product/124734-REG/Avenger_D230_Super_Clamp_Grip_Head.html#accessories

Wow... that is bold.  Even if not extended, the 099B is pretty big and long.

Yeah, I was a little nervous at first when i felt all that weight on there lowering it over the rail, but I checked all connections and used fail safes, so I decided to show some cajones and go with it. I was confident that I'd do ok with it and all went well.
Microtech Gefell M200: M20/M21/M27 caps> Bumblebee MiAGi-II/Darktrain silver cable's/"Chuck" Belden cables> Aerco MP-2 or Busman modded DR-680 pre-amps> Darktrain cables & interconnects> Tascam DR-680 (Busman mod)
AT853's(card's/hyper's)>AT8533x>Aerco MP-2>Sony M10

Offline Myco

  • Trade Count: (13)
  • Needs to get out more...
  • *****
  • Posts: 7591
  • Gender: Male
Re: Need help with Clamp and extension pole
« Reply #40 on: September 30, 2011, 02:02:45 PM »
Thanks! I just had a "doh!" moment, I searched for it in mics rather than lighting.
  ;)  ;D
Microtech Gefell M200: M20/M21/M27 caps> Bumblebee MiAGi-II/Darktrain silver cable's/"Chuck" Belden cables> Aerco MP-2 or Busman modded DR-680 pre-amps> Darktrain cables & interconnects> Tascam DR-680 (Busman mod)
AT853's(card's/hyper's)>AT8533x>Aerco MP-2>Sony M10

Offline Hypnocracy

  • Trade Count: (46)
  • Needs to get out more...
  • *****
  • Posts: 2012
  • Hypnocratic Missionary
    • Hypno on teh LMA
Re: Need help with Clamp and extension pole
« Reply #41 on: October 02, 2011, 08:19:01 AM »
Myco...was the 099b horizontal or vertical? In other words...Hanging down off the rail vs Sticking out from the balcony?
_____________
hypno on teh Archive

This must be heaven -- 'cause here's where the rainbow ends
If this ain't the real thing, then it's close enough to pretend

Offline vanark

  • TDS
  • Trade Count: (29)
  • Needs to get out more...
  • *****
  • Posts: 8967
  • If you ain't right, you better get right!
    • The Mudboy Grotto - North Mississippi Allstar fan site
Re: Need help with Clamp and extension pole
« Reply #42 on: October 02, 2011, 09:00:23 AM »
Vertical - hanging down off the rail.

I've run the 099B horizontal off balcony rails before, but not with split omnis and another set of mics.  Only had a single set out there.  Was rock solid.
If you have a problem relating to the Live Music Archive (http://www.archive.org/details/etree) please send an e-mail to us admins at LMA(AT)archive(DOT)org or post in the LMA thread here and we'll get on it. LMA FAQ: https://help.archive.org/help/live-music-archive-etree-org/

Link to LMA Recordings

Link to Team Dirty South Recordings on the LMA

Mics: Microtech Gefell M21 (with Nbob actives) | Church Audio CA-11 (cards) (with CA UBB)
Pres: babynbox
Recorders: Tascam DR-60D | Tascam DR-40 | Sony PCM-A10 | Edirol R-4

Offline Hypnocracy

  • Trade Count: (46)
  • Needs to get out more...
  • *****
  • Posts: 2012
  • Hypnocratic Missionary
    • Hypno on teh LMA
Re: Need help with Clamp and extension pole
« Reply #43 on: October 11, 2011, 08:15:54 PM »
Ok...anyone have photo's of Manfrotto 649's and Extension pole on a Theater Seat?
_____________
hypno on teh Archive

This must be heaven -- 'cause here's where the rainbow ends
If this ain't the real thing, then it's close enough to pretend

Offline it-goes-to-eleven

  • Trade Count: (58)
  • Needs to get out more...
  • *****
  • Posts: 6695
Re: Need help with Clamp and extension pole
« Reply #44 on: October 11, 2011, 08:45:37 PM »
Ok...anyone have photo's of Manfrotto 649's and Extension pole on a Theater Seat?

You mean so it would poke someone in the arse?

 

RSS | Mobile
Page created in 0.053 seconds with 39 queries.
© 2002-2026 Taperssection.com
Powered by SMF