Topic: Problem with my rig (lack of bass)

[Brian Skalinder]

Robb rewired them.  I'll test them right away when I get them back.

So what's the revised wiring pinout?

[George]

Robb rewired them.  I'll test them right away when I get them back.

So what's the revised wiring pinout?

Dunno, I'm sure Robb/Darktrain will answer that, I pm'd him that I posted the samples in here as a follow up.

Also, I took the Tinybox and B3's and did another test. 

I ran the mikes six feet back, playing the same Keb Mo track.  I ran the first sample with the Tinybox set to Mid.  I ran the second test with the Tinybox set to High.  One thing I recall clearly is that when I
taped the last show on the 15th I ran the Tinybox on High and there was quite a bit of noise.  I did not hear any noise this time around. 

Doing further tests:  I tested Springsteen's Glory Days with the TB set to High and both samples sound identical on both mikes, the B3's and AT853 Cards (samples below).

edit: Brian, sounds like he swapped the wires as per this thread:  http://taperssection.com/index.php?topic=144795.0

[darktrain]

ended up being:

Pin 1 - Shield
Pin 2 - Black
Pin 3 - Red

and according to Jon at Naiant the tinybox was pretty standard with pin 1- shield, pin 2 signal and pin 3 power, but looking at the countryman website they list red as signal, that is where the confusion came in first time around, so just flipped the red and black