Become a Site Supporter and Never see Ads again!
« previous next »
Pages: [1]   Go Down

Author Topic: dealing with too much room sound  (Read 3375 times)

0 Members and 1 Guest are viewing this topic.

Offline ethan

  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 4305
  • Gender: Male
  • Go Buffs!
    • COTapers.org
dealing with too much room sound
« on: January 31, 2012, 02:12:10 PM »

Obviously room boom/reverb can be somewhat mitigated by mic placement and config.

Are there any techniques for mitigating too much boom/reverb in an audience tape.

I've been getting real good and adding presence to SBD's with Izotope multi-band compression, exciter and reverb. I'm wondering if there are any tricks/tips to go the other way.
Logged
COtapers.org - "We're higher than your average taper"

Offline page

  • Trade Count: (25)
  • Needs to get out more...
  • *****
  • Posts: 8388
  • Gender: Male
  • #TeamRetired
Re: dealing with too much room sound
« Reply #1 on: January 31, 2012, 02:21:42 PM »
have you tried playing around with EQ in the the 300-500hz band and around the 5-7khz regions? I find I catch the most room reverb in those areas and I've knocked out maybe a single db in one or either for mild improvements.

I havn't found a magic bullet though for post-corrections.
Logged
"This is a common practice we have on the bus; debating facts that we could easily find through printed material. It's like, how far is it today? I think it's four hours, and someone else comes in at 11 hours, and well, then we'll... just... talk about it..." - Jeb Puryear

"Nostalgia ain't what it used to be." - Jim Williams

Offline Belexes

  • Trade Count: (10)
  • Needs to get out more...
  • *****
  • Posts: 5223
  • Gender: Male
Re: dealing with too much room sound
« Reply #2 on: January 31, 2012, 10:18:06 PM »
Quote from: page on January 31, 2012, 02:21:42 PM
have you tried playing around with EQ in the the 300-500hz band and around the 5-7khz regions?

This is what I do if I taped in a bad room.  Pull down these bands and see if that does the trick.
Logged
Busman Audio BSC1-K1/K2/K3/K4 > HiHo Silver XLR's > Deck TBD

CA-14 (c,o)/MM-HLSC-1 (4.7k mod)/AT853(4.7k mod)(c,o,h,sc)/CAFS (o)/CA-1 (o) > CA-9100 (V. 4.1)/CA-9200/CA-UBB > Sony PCM-D50/Sony PCM-M10

Offline noahbickart

  • phishrabbi
  • Site Supporter
  • Trade Count: (33)
  • Needs to get out more...
  • *
  • Posts: 2569
  • Gender: Male
  • So now I wander over grounds of light...
Re: dealing with too much room sound
« Reply #3 on: February 01, 2012, 04:30:07 PM »
Use a Mid - Side plugin to convert LR to MS, then reduce the ratio of side to mid, and reconvert.
Logged
Recording:
Capsules: Schoeps mk41v (x2), mk22 (x2), mk3 (x2), mk21 & mk8
Cables: 2x nbob KCY, 1 pair nbob actives, GAKables 10' & 20' 6-channel snakes, Darktrain 2 & 4 channel KCY and mini xlr extensions:
Preamps:    Schoeps VMS 02iub, Naiant IPA, Sound Devices Mixpre6 I
Recorders: Sound Devices Mixpre6 I, Sony PCM m10

Home Playback: Mac Mini> Mytek Brooklyn+> McIntosh MC162> Eminent Tech LFT-16; Musical Fidelity xCan v2> Hifiman HE-4XX / Beyerdynamic DT880

Office Playback: iMac> Grace m903> AKG k701 / Hifiman HE-400
Pages: [1]   Go Up
« previous next »
 

RSS | Mobile
Page created in 0.038 seconds with 28 queries.
© 2002-2025 Taperssection.com
Powered by SMF