Become a Site Supporter and Never see Ads again!
Previous topic - Next topic
Pages: Pages1   Go Down

Author Topic: Best way to do this kind of matrix  (Read 3,342 times)

0 Members and 1 Guest are viewing this topic.

dorrcoq

  • Guest
  • Trade Count: (0)
Best way to do this kind of matrix
« on: April 20, 2012, 03:35:48 PM »
Stereo mic and a mono soundboard.  Should I double the SBD and mix the two sources that way, or split the channels and then mix the three tracks into two?  Using Wavelab 6, if it matters.
Logged

Offline fleish

  • Trade Count: (4)
  • Needs to get out more...
  • *****
  • Posts: 3,203
  • I've been safariing since before you were born
Re: Best way to do this kind of matrix
« Reply #1 on: April 20, 2012, 04:44:00 PM »
Quote from: dorrcoq on April 20, 2012, 03:35:48 PM
Stereo mic and a mono soundboard.  Should I double the SBD and mix the two sources that way, or split the channels and then mix the three tracks into two?  Using Wavelab 6, if it matters.

FWIW - when I've done this in the past (albeit not using Wavelab), I've doubled/copied the SBD to make a stereo track and then mixed it with the stereo AUD source.
Logged
Mics: AT853, MC930, AK40/AK50 > LC3 > KM100, ADK TL51
Cables: Audio Magic XStream silver, Kind Kables, Zaolla M1.5
Decks: D8, Busman Hybrid R4

My LMA tapes: http://archive.org/search.php?query=taper%3A%22Todd+Fleisher%22

My LMA transfers: http://archive.org/search.php?query=-taper%3A%28Todd%20Fleisher%29%20AND%20transferer%3A%28Todd%20Fleisher%29

My LMA uploads: http://archive.org/search.php?query=collection%3Aetree%20AND%20uploader%3A%28todd%40fleish.org%29

Quote from: morst on April 02, 2009, 10:54:25 PM
Awesome. David said you were like The Wolf in Pulp Fiction. Shows up just in time with tons of gear, does a pro job, and disappears into the night! :-)

dorrcoq

  • Guest
  • Trade Count: (0)
Re: Best way to do this kind of matrix
« Reply #2 on: April 20, 2012, 05:07:06 PM »
Quote from: fleish on April 20, 2012, 04:44:00 PM
Quote from: dorrcoq on April 20, 2012, 03:35:48 PM
Stereo mic and a mono soundboard.  Should I double the SBD and mix the two sources that way, or split the channels and then mix the three tracks into two?  Using Wavelab 6, if it matters.

FWIW - when I've done this in the past (albeit not using Wavelab), I've doubled/copied the SBD to make a stereo track and then mixed it with the stereo AUD source.

Yeah, that's what I did, but I was wodnering if it was the best way.  Guess I can try it and find out. ;D 
Logged
Pages: Pages1   Go Up
Previous topic - Next topic
 

RSS | Mobile
Page created in 0.056 seconds with 25 queries.
© 2002-2026 Taperssection.com
Powered by SMF