i pulled off stealthing with 480s a couple times but there really isn't a good way to mount them. if you're using standard xlr connectors they end up being about 7- 8 inches long, so you might want to think about making a set of cables with right angle connectors because they'll save you about an inch or an inch and a half. i ended up running a-b in a baseball hat with two holes cut out for the caps to stick out, you could try doing din or another configuration but having the mic cables come out the side of the hat rather than the back is a bit more obvious. my hat was black so once it got a little dark it didn't look too obvious but it certainly wasn't uber stealthy either.