Become a Site Supporter and Never see Ads again!

Author Topic: which is best for soundboard: r09hr, dr07, dr2d  (Read 4277 times)

0 Members and 1 Guest are viewing this topic.

Offline daze

  • Trade Count: (1)
  • Taperssection Regular
  • **
  • Posts: 199
which is best for soundboard: r09hr, dr07, dr2d
« on: November 22, 2012, 08:09:13 PM »
Which would be the best of these 3 recorders (r09hr, dr07, dr2d) to plug into a soundboard?  I'm going to a show this weekend and will plug one into soundboard, and run 2 audience.  thx in advance.

Offline StuStu

  • Trade Count: (40)
  • Needs to get out more...
  • *****
  • Posts: 2860
  • Gender: Male
Re: which is best for soundboard: r09hr, dr07, dr2d
« Reply #1 on: November 22, 2012, 09:23:23 PM »
Which would be the best of these 3 recorders (r09hr, dr07, dr2d) to plug into a soundboard?  I'm going to a show this weekend and will plug one into soundboard, and run 2 audience.  thx in advance.


They should all sound fine. The advantage of using the DR-2D would be that you could run a matrix with one set of mics and the soundboard. I believe that you'll probably need an attenuator between the SBD and the Tascam though.
MK5, MK8, MK41, KM184D, CK77, B3 ---CMD 2U XT, KC5, KCY, AKI---KCY Tinybox, Ugly BB---AETA 4MinX, PMD661 MKII, R-26, M-10, MR-1

Offline yates7592

  • Trade Count: (12)
  • Taperssection Member
  • ***
  • Posts: 695
  • Gender: Male
Re: which is best for soundboard: r09hr, dr07, dr2d
« Reply #2 on: November 23, 2012, 03:48:59 AM »
The R-09HR takes the hottest signal (I think I am correct there).

Offline jbell

  • TDS
  • Trade Count: (149)
  • Needs to get out more...
  • *****
  • Posts: 4604
  • Gender: Male
  • Spreadicated
Re: which is best for soundboard: r09hr, dr07, dr2d
« Reply #3 on: November 23, 2012, 10:05:03 AM »
M10 looks better according to these tests!

http://www.avisoft.com/recordertests.htm

The R-09HR takes the hottest signal (I think I am correct there).
Mics: DPA ST4011ER, 4018ER | Neumann kk 184, kk 185 > Nbob/PFA
Preamps: DPA MMA 6000
Recorders: Sound Devices Mixpre-10 II | Sony PCM A10

-20        -12         -6        TDS   (32/48)     
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]][}   
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]][} 
__________________________
|Record|  Runtime: 4:19.99  {|||] 75%

Offline yates7592

  • Trade Count: (12)
  • Taperssection Member
  • ***
  • Posts: 695
  • Gender: Male
Re: which is best for soundboard: r09hr, dr07, dr2d
« Reply #4 on: November 23, 2012, 10:19:34 AM »
M10 looks better according to these tests!

http://www.avisoft.com/recordertests.htm

The R-09HR takes the hottest signal (I think I am correct there).

Yes, but the OP doesn't have one of those!

Offline jbell

  • TDS
  • Trade Count: (149)
  • Needs to get out more...
  • *****
  • Posts: 4604
  • Gender: Male
  • Spreadicated
Re: which is best for soundboard: r09hr, dr07, dr2d
« Reply #5 on: November 23, 2012, 11:57:18 AM »
Your right!  My bad.

M10 looks better according to these tests!

http://www.avisoft.com/recordertests.htm



The R-09HR takes the hottest signal (I think I am correct there).

Yes, but the OP doesn't have one of those!
« Last Edit: November 24, 2012, 05:47:39 AM by jbell »
Mics: DPA ST4011ER, 4018ER | Neumann kk 184, kk 185 > Nbob/PFA
Preamps: DPA MMA 6000
Recorders: Sound Devices Mixpre-10 II | Sony PCM A10

-20        -12         -6        TDS   (32/48)     
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]][}   
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]][} 
__________________________
|Record|  Runtime: 4:19.99  {|||] 75%

Offline daze

  • Trade Count: (1)
  • Taperssection Regular
  • **
  • Posts: 199
Re: which is best for soundboard: r09hr, dr07, dr2d
« Reply #6 on: November 23, 2012, 06:46:58 PM »
thx - so if i'm reading the chart right (which I'm not sure I am) i'd be best off using the r09hr on the sbd?   thx for your help!

Offline F.O.Bean

  • Team Schoeps Tapir that
  • Trade Count: (126)
  • Needs to get out more...
  • *****
  • Posts: 40699
  • Gender: Male
  • Taperus Maximus
    • MediaFire Recordings
Re: which is best for soundboard: r09hr, dr07, dr2d
« Reply #7 on: November 23, 2012, 07:28:37 PM »
I just ran SBD>M10 Weds night, and it couldnt have been ANY EASIER ;) Line-In, with gain level at about 3, and peaks at -10db. PERFECT IMO!
Schoeps MK 4V & MK 41V ->
Schoeps 250|0 KCY's (x2) ->
Naiant +60v & +48v/40v Low Noise PFA's (x2) ->
DarkTrain Right Angle Stubby XLR's (x3) ->
Sound Devices MixPre-6 & MixPre-3

http://www.archive.org/bookmarks/diskobean
http://bt.etree.org/mytorrents.php
http://www.mediafire.com/folder/j9eu80jpuaubz/Recordings

Offline Gutbucket

  • record > listen > revise technique
  • Trade Count: (16)
  • Needs to get out more...
  • *****
  • Posts: 16058
  • Gender: Male
  • We create auditory illusions, not reproductions
Re: which is best for soundboard: r09hr, dr07, dr2d
« Reply #8 on: November 24, 2012, 12:48:17 AM »
Of the three mentioned, I'd choose the R-09HR for recording SBD alone, becasue it should be able to handle a hotter signal without overloading if that happens to be necessary.  Any of the three will work given a good level out of the board.  Ive used both original R09s and DR2ds and have not had a problem with either.
musical volition > vibrations > voltages > numeric values > voltages > vibrations> virtual teleportation time-machine experience
Better recording made easy - >>Improved PAS table<< | Made excellent- >>click here to download the Oddball Microphone Technique illustrated PDF booklet<< (note: This is a 1st draft, now several years old and in need of revision!  Stay tuned)

Offline daze

  • Trade Count: (1)
  • Taperssection Regular
  • **
  • Posts: 199
Re: which is best for soundboard: r09hr, dr07, dr2d
« Reply #9 on: November 24, 2012, 08:54:20 AM »
thanks!  You all are the best.  I will run my r09hr off the soundboard, and will use the other two recorders for audience.  I realize now I need to buy an attenuator cable for the future (but that won't help me tonite lol). 

 

RSS | Mobile
Page created in 0.194 seconds with 39 queries.
© 2002-2024 Taperssection.com
Powered by SMF