Become a Site Supporter and Never see Ads again!
« previous next »
Pages: [1]   Go Down

Author Topic: locking XLR won't unlock?  (Read 5858 times)

0 Members and 1 Guest are viewing this topic.

Offline Karl

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 377
locking XLR won't unlock?
« on: January 30, 2013, 06:57:47 PM »
So I just got my new TASCAM DR100 mkii in the mail today, quite excited  ;D

So I plug in my phantom power adaptors (Samson PM4) to the Tascam XLR input, and now it won't come out (one pulled right out, the other is stuck)

What to do!?
« Last Edit: January 30, 2013, 07:29:18 PM by Karl »
Logged
My portable rig:

AT853>Zoom F6

Offline DigiGal

  • AES Associate Member
  • Trade Count: (30)
  • Needs to get out more...
  • *****
  • Posts: 2583
  • Gender: Female
  • Stay healthy and safe!
    • DigiGal Internet Archive Recordings
Re: locking XLR won't unlock?
« Reply #1 on: January 30, 2013, 07:41:28 PM »
paper clip
Logged
Mics: AKG CK91/CK94/CK98/SE300 D-330BT | DPA 4060 4061 4266 | Neumann TLM 103 | Senn ME66/K6/K6RD MKE2 MD421 MD431 | Shure VP88 SM7B SM63L SM58 Anniversary Cables: Gotham GAC-4/1 Quad w/Neutrik EMC | Gotham GAC-2pair w/AKG MK90/3 connectors | DigiGal AES>S/PDIF cable Preamp: SD MixPre-D Recorders: SD MixPre 6 | Marantz PMD 661 Edit: 2011 27" 3.4GHz Quad i7 iMac High Sierra | 2020 13" MBA Quad i7 Catalina | Wave Editor | xACT | Transmission | FCP X 

Offline Karl

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 377
Re: locking XLR won't unlock?
« Reply #2 on: January 30, 2013, 07:45:46 PM »
If I can fit it in.....I will let you know if it works 
Logged
My portable rig:

AT853>Zoom F6

Offline audBall

  • Trade Count: (38)
  • Needs to get out more...
  • Posts: 6565
  • Gender: Male
  • Feel brand new about it
Re: locking XLR won't unlock?
« Reply #3 on: January 30, 2013, 07:54:13 PM »
The PM4's always appeared to be a little wider than standard XLR's, at least in my experience. I can't help but recommend some breakout cables between them and the recorder.
Logged
mg m20.21.23 ■ akg ck61.62.63 »  nbob■naiant
aercomp2 ■ v2∞3 ■ sx-m2d2
pcm-d100 ■ pmd661 ■ r44ocm ■ f3

Offline Karl

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 377
Re: locking XLR won't unlock?
« Reply #4 on: January 31, 2013, 10:13:39 AM »
I've been trying the paperclip, it's not helping. It looks like it locks on the inside of the connection, I'm not sure how a paper clip is even supposed to help.
Logged
My portable rig:

AT853>Zoom F6

Offline DigiGal

  • AES Associate Member
  • Trade Count: (30)
  • Needs to get out more...
  • *****
  • Posts: 2583
  • Gender: Female
  • Stay healthy and safe!
    • DigiGal Internet Archive Recordings
Re: locking XLR won't unlock?
« Reply #5 on: January 31, 2013, 10:53:32 AM »
I've worked a paper clip with a small loop bend at the tip to release the latch in the past when this has happened. 
Logged
Mics: AKG CK91/CK94/CK98/SE300 D-330BT | DPA 4060 4061 4266 | Neumann TLM 103 | Senn ME66/K6/K6RD MKE2 MD421 MD431 | Shure VP88 SM7B SM63L SM58 Anniversary Cables: Gotham GAC-4/1 Quad w/Neutrik EMC | Gotham GAC-2pair w/AKG MK90/3 connectors | DigiGal AES>S/PDIF cable Preamp: SD MixPre-D Recorders: SD MixPre 6 | Marantz PMD 661 Edit: 2011 27" 3.4GHz Quad i7 iMac High Sierra | 2020 13" MBA Quad i7 Catalina | Wave Editor | xACT | Transmission | FCP X 

Offline Karl

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 377
Re: locking XLR won't unlock?
« Reply #6 on: January 31, 2013, 11:01:10 AM »
Like was mentioned above, the fit is tight. I can squeeze a small paperclip in a bit, but there is zero wiggle room. I am going to try and disassemble the phantom power adapotor, to see if I can get it back that way. It's hard just to return this to the seller, because then I risk losing my adaptor.
Logged
My portable rig:

AT853>Zoom F6

Offline F.O.Bean

  • Team Schoeps Tapir that
  • Trade Count: (126)
  • Needs to get out more...
  • *****
  • Posts: 40703
  • Gender: Male
  • Taperus Maximus
    • MediaFire Recordings
Re: locking XLR won't unlock?
« Reply #7 on: January 31, 2013, 06:33:26 PM »
Quote from: Karl on January 31, 2013, 11:01:10 AM
Like was mentioned above, the fit is tight. I can squeeze a small paperclip in a bit, but there is zero wiggle room. I am going to try and disassemble the phantom power adapotor, to see if I can get it back that way. It's hard just to return this to the seller, because then I risk losing my adaptor.

Did u get it fixed?
Logged
Schoeps MK 4V's & MK 41V's & 250|0 KCY's ->
Naiant +60v & +48v Low Noise PFA's ->
DarkTrain Right Angle Stubby XLR's ->
Sound Devices MixPre-6 & MixPre-3

https://archive.org/details/@diskobean
http://bt.etree.org/mytorrents.php
http://www.mediafire.com/folder/j9eu80jpuaubz/Recordings

Offline Karl

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 377
Re: locking XLR won't unlock?
« Reply #8 on: January 31, 2013, 10:53:44 PM »
Nope, I'm stuck, going to call Tascam support in the AM. Just hope my adaptor doesn't get los in the process. 
Logged
My portable rig:

AT853>Zoom F6

Offline LikeASong

  • Trade Count: (11)
  • Taperssection Member
  • ***
  • Posts: 520
  • Gender: Male
    • U2start.com
Re: locking XLR won't unlock?
« Reply #9 on: February 01, 2013, 01:01:18 PM »
Similar thing happened to a friend of mine when he first tested his DR-40
Logged
The worst things in the world are justified by belief.
-U2

After silence, that which comes nearest to expressing the inexpressible is music.
-Aldous Huxley
Pages: [1]   Go Up
« previous next »
 

RSS | Mobile
Page created in 0.056 seconds with 34 queries.
© 2002-2025 Taperssection.com
Powered by SMF