Become a Site Supporter and Never see Ads again!
« previous next »
Pages: [1]   Go Down

Author Topic: 80Hz High Pass Filter Question  (Read 3845 times)

0 Members and 1 Guest are viewing this topic.

Offline Cheesecadet

  • Trade Count: (21)
  • Needs to get out more...
  • *****
  • Posts: 3024
  • Gender: Male
  • http://db.etree.org/cheesecadet
80Hz High Pass Filter Question
« on: March 09, 2013, 03:43:27 PM »
Hey there, I am curious if running the 80Hz High Pass Filter on my Shure FP24 pre is going to eliminate a substantial amount of bass from my recordings or is that setting almost negligible? 

Any input or experience with this pre and/or setting is helpful.

Thanks
Logged
AKG 481's > Hi H0s > MixPre-3 |  4061's (Matched) > Tinybox v1.5 > PCM-A10 |  AT933's w/ AT853-ELE's (SC/C/O)

Vinyl:
Fluance RT83 Reference > MCS 3230 Receiver > Realistic MC-500's (NOS)

Upcoming:
01/23 Phil Hanley - Comedy Works
01/30 Michael Blaustein - Comedy Works
02/08 ManyColors: J. Dilla Tribute - Dazzle
04/03 Bill Frisell - Gates Hall
04/24 Dead & Co. - Sphere
06/18 FirstGrass
06/19 TBF
06/20 TBF

Offline page

  • Trade Count: (25)
  • Needs to get out more...
  • *****
  • Posts: 8388
  • Gender: Male
  • #TeamRetired
Re: 80Hz High Pass Filter Question
« Reply #1 on: March 09, 2013, 06:37:01 PM »
Logged
"This is a common practice we have on the bus; debating facts that we could easily find through printed material. It's like, how far is it today? I think it's four hours, and someone else comes in at 11 hours, and well, then we'll... just... talk about it..." - Jeb Puryear

"Nostalgia ain't what it used to be." - Jim Williams

Chimney Top

  • Guest
  • Trade Count: (0)
Re: 80Hz High Pass Filter Question
« Reply #2 on: March 24, 2013, 09:03:23 PM »
Quote from: Cheesecadet on March 09, 2013, 03:43:27 PM
Hey there, I am curious if running the 80Hz High Pass Filter on my Shure FP24 pre is going to eliminate a substantial amount of bass from my recordings or is that setting almost negligible? 

Any input or experience with this pre and/or setting is helpful.

Thanks


If you are recording a band, I would NOT use the high pass filter.
Logged
Pages: [1]   Go Up
« previous next »
 

RSS | Mobile
Page created in 0.035 seconds with 26 queries.
© 2002-2025 Taperssection.com
Powered by SMF