Topic: iso: 5/8 extension adapter to do XY

[deadheadcorey]

looking for extension adapter to go on my 5/8 thread on my akg tbar. they sell anything like that over b&h?

[dnsacks]

couldn't you flip one of the mic mounts so it screws in from the bottom (with one of the mics hanging under the tbar)?  This would result in a fair bit of vertical spacing but would allow you to go xy

[deadheadcorey]

with the shockmounts i have, they are a lil heavy to do tha... they are the avantone shockmounts

[Todd R]

You can often put together a small riser by coupling together a couple of adapters.  Something like this pairing:

http://www.bhphotovideo.com/c/product/232828-REG/K_M_21600_000_01_21600N_Threaded_Adapter.html
http://www.bhphotovideo.com/c/product/400109-REG/On_Stage_MA_200_MA200_Screw_Adapter.html

Or alternatively this pair of adapters:
http://www.bhphotovideo.com/c/product/82457-REG/Atlas_Sound_AD_5B_AD_5B_Coupling_5_8_F_to.html
http://www.bhphotovideo.com/c/product/82456-REG/Atlas_Sound_AD_4B_AD_4B_3_4_Long_5_8.html

Or you can just get a quick disconnect adapter, like either one of these:
http://www.bhphotovideo.com/c/product/400116-REG/On_Stage_QK_2B_Quick_Release_Adapter_Black.html
http://www.bhphotovideo.com/c/product/407113-REG/On_Stage_QK_10B_QK10B_Quick_Release_Adapter.html

[deadheadcorey]

thanks todd