« Reply #363 on: March 07, 2015, 11:46:15 AM »
I contacted Tom at Tascam yesterday about the op amp chips and here is his response:
"You are looking at the wrong side of the PCB. The 4 mic pres use NE5532 op amps. The output stage and the 1/8" input for Channels 1/2 use the 4580s."
Well don't I feel like a buffoon.
I will tear into the deck again today most likely and check this out and post more pics if needed. Based on this new information it would appear that the JWmod will require 5 chips instead of just the 3 originally noted. I am waiting for a response from Jim currently and have been in contact with him regularly talking about this mod so hopefully I hear something back from him today.
« Last Edit: March 11, 2015, 04:05:35 PM by Cheesecadet »
Logged
AKG 481's, DPA 4061's (Matched), AT ES933's w/ AT853-ELE's (SC/C/O), ECM-19B's, MixPre-3, A10, M10 x 2, Hi Ho Silvers, Various Darktrain & GAKables
Vinyl:
Fluance RT83 Reference > MCS 3230 Receiver > Realistic MC-500's (NOS)
Upcoming:
05/04 Harry Mack (?)
05/10 Adam Bodine Quartet
06/07 Bill Frisell Trio
06/08 Common
06/19 Sensational Barnes Brothers
06/20 Adam Bodine Quintet
07/19 Chali 2na & Cut Chemist
07/30 Tomorrows Bad Seeds