New 5V battery packs giving me an excuse to keep a JB3

[Life In Rewind]

Im getting rid of my collection of Creative JB3s - but realized all these new 5V battery packs might be perfect for this old standby.

How about this cable?

I think that's the plug? Probably need the 2A output on the battery?

http://www.ebay.com/itm/like/301391658851?lpid=82&chn=ps

[stevetoney]

I'd pull out my McCrapper (MT2496) before I pulled that JB3 back out.  No thank-ya.   

[yltfan]

When you can get a decent 24 bit SD card recorder for under $100, there really is no reason to invest in stuff for your JB3 (or DAT, mini disc, iriver, etc)

[willndmb]

Jb3 might be old but that cable would work with any 5v device utilizing the same tip. I wouldn't trash them

[Life In Rewind]

When you can get a decent 24 bit SD card recorder for under $100, there really is no reason to invest in stuff for your JB3 (or DAT, mini disc, iriver, etc)

I already have the 5V battery to power my TASCAM DR-70D...so the only investment here will be a few bucks for a cable.

I have 4 JB3s...going to keep one for the rare occasion I might wish for a bit bucket.

[Life In Rewind]

Jb3 might be old but that cable would work with any 5v device utilizing the same tip. I wouldn't trash them

The cable in question is a Sony PlayStation Portable accessory...(one application)

I've been using the PSPs wal-wart to power my JB3 for years.

Creative was way ahead of the game with this early 5V device! ( I guess due to the HD power spec)

[servotrophy424]

Im getting rid of my collection of Creative JB3s - but realized all these new 5V battery packs might be perfect for this old standby.

How about this cable?

I think that's the plug? Probably need the 2A output on the battery?

http://www.ebay.com/itm/like/301391658851?lpid=82&chn=ps

I think it needs the 2A output on the battery