Become a Site Supporter and Never see Ads again!

Author Topic: Best wiring for StarQuad with TRS - TRS Cable?  (Read 1734 times)

0 Members and 1 Guest are viewing this topic.

Offline manleyf

  • Trade Count: (1)
  • Taperssection Regular
  • **
  • Posts: 109
  • Gender: Male
  • http://SoulCoustic.com
    • Separate Reality Productions
Best wiring for StarQuad with TRS - TRS Cable?
« on: April 04, 2015, 02:54:08 PM »
Hi - I have several feet of StarQuad cable laying around and need a 25' 3.5mm to 3.5mm cable.  I read the great post of unbalanced vs. balanced cable here: http://taperssection.com/index.php?topic=72453.0

Since I have the StarQuad, I'm going to go ahead and use it- the question is how should I wire it- I've searched here and out there :-) and have found several options:

1 - white+ to tip
2 - blue+ to ring
3 - white-, blue-, shield to sleeve/ground

OR

1 - white+ to tip
2 - white- to ring
3 - blue+, blue-, shield to sleeve/ground

OR

1 - white+, white- to tip
2 - blue+, blue- to ring
3 - shield to sleeve/ground

Are any of these 3 configurations best?

Thanks!
Earthworks SR30/SRO > V3 > MT/JB3
Church Audio Pro-Cards/Mini-Omnis > ChruchAudio 9100 PreAmp > MT/JB3
http://RecordMeLive.com
http://SoulCoustic.com

Offline DigiGal

  • Trade Count: (29)
  • Needs to get out more...
  • *****
  • Posts: 2542
  • Gender: Female
  • Boycott Photobucket, start moving photos now!
    • DigiGal Internet Archive Recordings
Re: Best wiring for StarQuad with TRS - TRS Cable?
« Reply #1 on: April 04, 2015, 04:44:17 PM »
Think of it like this:

White HOT = PLUS      Blue COLD = MINUS

Both whites to plus, both colds to minus, shield to shield/ground.
Mics: AKG CK91/CK94/CK98/SE300 | Shure VP88 | Senn ME66/K6/K6RD Cables: Gotham GAC-4/1 "StarQuad" w/Neutrik EMC | Gotham GAC-2pair w/AKG MK90/3 connectors | DigiGal AES>S/PDIF cable Preamp: Sound Devices MixPre-D Recorder: Marantz PMD 661 Edit: 27"3.4GHz QuadCore i7 iMac | OS X Yosemite 10.10.5 | Wave Editor | xACT  | Transmission | Final Cut Pro X                                                            

Offline manleyf

  • Trade Count: (1)
  • Taperssection Regular
  • **
  • Posts: 109
  • Gender: Male
  • http://SoulCoustic.com
    • Separate Reality Productions
Re: Best wiring for StarQuad with TRS - TRS Cable?
« Reply #2 on: April 04, 2015, 05:19:02 PM »
Sounds good- option 3 is what I had thought logical, but just to be obsessed with doing it the best possible way, I did some Google searches, and found option 1 and 2.

I just want best sound quality for a 25' run, and if there's any potential for noise reduction, take advantage of that too.

Thanks for the replies!
Earthworks SR30/SRO > V3 > MT/JB3
Church Audio Pro-Cards/Mini-Omnis > ChruchAudio 9100 PreAmp > MT/JB3
http://RecordMeLive.com
http://SoulCoustic.com

 

RSS | Mobile
Page created in 0.152 seconds with 30 queries.
© 2002-2018 Taperssection.com
Powered by SMF