Become a Site Supporter and Never see Ads again!
Previous topic - Next topic
Pages: Pages1   Go Down

Author Topic: m10 mono wavs give "unknown data" error  (Read 5,493 times)

0 Members and 1 Guest are viewing this topic.

Offline Kevin T

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 100
m10 mono wavs give "unknown data" error
« on: May 21, 2015, 01:25:30 PM »
Adacity. Wavs only work if stereo.  Yes 44.1/16 format.
Any ideas?
Logged

Offline Gutbucket

  • record > listen > revise technique
  • Trade Count: (16)
  • Needs to get out more...
  • *****
  • Posts: 16,974
  • We create auditory illusions, not reproductions
Re: m10 mono wavs give "unknown data" error
« Reply #1 on: May 21, 2015, 02:45:21 PM »
Pair up the mono WAVs and combine them to form stereo WAVs before opening in Audacity.

Sound Devices Wave Agent is a no cost download which can do that among other WAV/BWF tasks.  Check the Mono Combine function-
http://www.sounddevices.com/products/accessories/software/wave-agent
Logged
musical volition > vibrations > voltages > numeric values > voltages > vibrations> virtual teleportation time-machine experience
Better recording made easy - >>Improved PAS table<< | Made excellent- >>click here to for the Oddball Microphone Technique illustrated PDF booklet<< (note: Version 4 provided in individual sections rather than a single booklet)

Offline Life In Rewind

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 890
    • www.rovingsign.com
Re: m10 mono wavs give "unknown data" error
« Reply #2 on: May 21, 2015, 02:57:20 PM »
Quote from: Gutbucket on May 21, 2015, 02:45:21 PM
Pair up the mono WAVs and combine them to form stereo WAVs before opening in Audacity.

Sound Devices Wave Agent is a no cost download which can do that among other WAV/BWF tasks.  Check the Mono Combine function-
http://www.sounddevices.com/products/accessories/software/wave-agent

Is it something about the M10 mono format?

In Audacity, I can open mono wavs from the DR-70D no problem...I even double checked the open vs import  - works fine.
Logged

Offline Kevin T

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 100
Re: m10 mono wavs give "unknown data" error
« Reply #3 on: May 22, 2015, 01:30:10 PM »
M10 gives error when mono audicty files are loaded & play attemped
Logged

Offline ScoobieKW

  • Trade Count: (3)
  • Taperssection All-Star
  • ****
  • Posts: 1,664
    • ScoobieSnax Audio Archive
Re: m10 mono wavs give "unknown data" error
« Reply #4 on: May 22, 2015, 02:34:33 PM »
Quote from: Kevin T on May 22, 2015, 01:30:10 PM
M10 gives error when mono audicty files are loaded & play attemped

Export mono file as stereo. The M10 is a stereo recorder, apparently the engineers didn't bother to test mono playback.
Logged
Busman BSC1, AT853 (O,C),KAM i2 Chuck Mod (C), Nak 300 (C),
M10, UA-5, US-1800, Presonus Firepod

http://kennedy-williams.net/scoobiesnax/

Offline earmonger

  • Trade Count: (5)
  • Taperssection Member
  • ***
  • Posts: 598
  • 20-20000 Hz
Re: m10 mono wavs give "unknown data" error
« Reply #5 on: May 22, 2015, 11:07:22 PM »
Hey, Gutbucket, thanks for the link to Wave Agent!
Logged
Pages: Pages1   Go Up
Previous topic - Next topic
 

RSS | Mobile
Page created in 0.097 seconds with 28 queries.
© 2002-2026 Taperssection.com
Powered by SMF