Become a Site Supporter and Never see Ads again!

Author Topic: mirroring channels in soundforge?  (Read 2621 times)

0 Members and 1 Guest are viewing this topic.

Offline save

  • (0)
  • Taperssection All-Star
  • ****
  • Posts: 1702
  • Gender: Male
  • blah blah blah
mirroring channels in soundforge?
« on: March 27, 2003, 04:34:33 PM »
i have a recording that i'm trying to fix that the right channel cuts out for the last 2 mins of the show.  Basically what i'm trying to do is mirror the last 2 mins from the left channel.  I've looked everywhere and can't figure out where to do this at?  If u can't do it in soundforge is there another program that will let u do this?

Thanks!
Justin
save

Offline Craig T

  • (8)
  • Needs to get out more...
  • *****
  • Posts: 4279
    • LMA
Re:mirroring channels in soundforge?
« Reply #1 on: March 27, 2003, 04:55:52 PM »
I think it is in the "channel mixer" tool.  There should be a preset for "mirror left to right" or something similar.  I know its there somewhere - I've had to do the same thing before.
Schoeps cmc6/4v / Line Audio CM3, OM1 / ADK A51 / Church Audio CA-14
Naiant Tinybox v2.2 / NBox(P) / Apogee Mini-MP / Church Audio ST9200 / CA-UGLY
Sony PCM-M10 / Tascam DR-70D

Offline hippies

  • (0)
  • Taperssection Member
  • ***
  • Posts: 830
  • Gender: Male
  • "What we all need is a left hand monkey wrench."
Re:mirroring channels in soundforge?
« Reply #2 on: March 27, 2003, 04:58:32 PM »
Soundforge will do this operation just fine.  here's what you do:

1)  highlight and delete unwanted portion of bad channel
2)  highlight and 'copy' SAME portion of remaining good channel
3)  'paste' this section into the incomplete channel

VIOLA!

easy move.  should take ya all of a minute to accomplish!  

hope this helps.

~S

Offline danmorgan

  • (0)
  • Taperssection All-Star
  • ****
  • Posts: 1346
  • Gender: Male
Re:mirroring channels in soundforge?
« Reply #3 on: March 27, 2003, 06:21:46 PM »
Tools>repair>copy other channel

Offline save

  • (0)
  • Taperssection All-Star
  • ****
  • Posts: 1702
  • Gender: Male
  • blah blah blah
Re:mirroring channels in soundforge?
« Reply #4 on: March 27, 2003, 11:42:18 PM »
Thanks guys!

-Justin
save

DaryanLenz

  • Guest
  • (0)
Re:mirroring channels in soundforge?
« Reply #5 on: March 28, 2003, 12:22:01 AM »
Justin,

I had better see you at moe on thursday!

Daryan

Offline save

  • (0)
  • Taperssection All-Star
  • ****
  • Posts: 1702
  • Gender: Male
  • blah blah blah
Re:mirroring channels in soundforge?
« Reply #6 on: March 28, 2003, 12:48:14 PM »
don't worry i'll be there  ;D  i still need to get my tix though....u think it'll sell out?  hopefully if i get a break from moving today i'll run to hyvee and get one.  i'm gonna talk to the guy i bought our house from and see if he'll bring his mod sbm-1 so i can run it w/ my rig and see if i like it...if so i think im gonna buy scott's mod sbm-1  ;)

-Justin
save

Offline save

  • (0)
  • Taperssection All-Star
  • ****
  • Posts: 1702
  • Gender: Male
  • blah blah blah
Re:mirroring channels in soundforge?
« Reply #7 on: March 28, 2003, 12:52:25 PM »
u going to Big Wu on this tuesday @ the green room?  I'm pretty sure i'll be there!

-Justin
save

 

RSS | Mobile
Page created in 0.041 seconds with 36 queries.
© 2002-2020 Taperssection.com
Powered by SMF