Become a Site Supporter and Never see Ads again!
Previous topic - Next topic
Pages: Pages1   Go Down

Author Topic: pcm-10 mic input  (Read 6,813 times)

0 Members and 1 Guest are viewing this topic.

Offline MBHOTAPER

  • Trade Count: (6)
  • Taperssection Member
  • ***
  • Posts: 739
  • Jam Bands Rock!
pcm-10 mic input
« on: May 08, 2017, 02:34:44 AM »
I prefer the more secure xlr or mini xlr connection. Is the stereo input on it work ok in the field?
« Last Edit: May 08, 2017, 04:28:52 AM by MBHOTAPER »
Logged

Offline udovdh

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 986
Re: pcm-10 mic input
« Reply #1 on: May 10, 2017, 10:53:40 AM »
Sure. Just us an angled mini jack connector.
Neutrik has nice ones.
Logged

Offline nolamule

  • Trade Count: (22)
  • Taperssection Member
  • ***
  • Posts: 617
  • where's my mule?
Re: pcm-10 mic input
« Reply #2 on: May 10, 2017, 12:37:48 PM »
You can also use a little piece of gaffers to secure the mini jack too.  :cheers:
Logged

Offline MBHOTAPER

  • Trade Count: (6)
  • Taperssection Member
  • ***
  • Posts: 739
  • Jam Bands Rock!
Re: pcm-10 mic input
« Reply #3 on: May 12, 2017, 09:36:42 PM »
Quote from: nolamule on May 10, 2017, 12:37:48 PM
You can also use a little piece of gaffers to secure the mini jack too.  :cheers:
Use to do that on my old dat decks. Trying to find a better way
Logged

Offline willndmb

  • Trade Count: (17)
  • Needs to get out more...
  • *****
  • Posts: 6,836
Re: pcm-10 mic input
« Reply #4 on: May 15, 2017, 09:08:27 AM »
I haven't had any issues with the mini plug coming out/loose on my m10.
I use a right angle
Logged
Mics - AKG ck61/ck63 (Naiant actives), SP-BMC-2, AT853 w/4.7 mod
XLR Cables - Silver Path w/Darktrain stubbies
Interconnect Cables - Dogstar (XLR), Darktrain (RCA > 1/8) (1/8 > 1/8), and Kind Kables (1/8f > 1/4)
Preamps - Naiant Littlebox & Tinybox
Recorders - PCM-M10 & DR-60D
Pages: Pages1   Go Up
Previous topic - Next topic
 

RSS | Mobile
Page created in 0.075 seconds with 28 queries.
© 2002-2026 Taperssection.com
Powered by SMF